Mg-Fe layered double hydroxide with chloride intercalated: synthesis,characterization and application for efficient nitrate removal

Environmental Science and Pollution Research - Mg-Fe layered double hydroxide intercalated with chloride (Mg-Fe-Cl LDH) was synthetized, characterized, and evaluated as adsorbent to remove nitrate...     

Storage of CO2 in saline aquifers: Effects of gravity, viscous, and capillary forces on amount and timing of trapping

CO₂ can be effectively immobilized during CO₂ injection into saline aquifers by residual trapping – also known as capillary trapping – a process resulting from capillary snap-off of isolated CO₂ bubbles. Simulations of CO₂ injection were performed to investigate the interplay of viscous and gravity forces and capillary trapping of CO₂. Results of those simulations show that gas injection processes in which gravitational forces are weak compared to viscous forces (low gravity number N_gv) trap significantly more CO₂ than do flows with strong gravitational forces relative to the viscous forces (high N_gv). The results also indicate that over a wide range of gravity numbers (N_gv), significant fractions of the trapping of CO₂ can occur relatively quickly. The amount of CO₂ that is trapped after injection ceases is demonstrated to correlate with N_gv. For some simulated displacements, effects of capillary pressure and aquifer dip angle on the amount and the rate of trapping are reported. Trapping increases when effects of capillary pressure and aquifer inclination are included in the model. Finally we show that injection schemes such as alternating injection of brine and CO₂ or brine injection after CO₂ injection can also enhance the trapping behavior.     

Adapting to changing climate risk by local government in New Zealand: institutional practice barriers and enablers

Adaptation to climate change has been reviewed in several developed nations, but in none where consideration of the effects of climate change is required by statute and devolved to local government. We examine the role of institutional arrangements, the players operating under them, the barriers and enablers for adaptation decision-making in the developed nation of New Zealand. We examine how the roles and responsibilities between national, regional and local governments influence the ability of local government to deliver long-term flexible responses to changing climate risk. We found that the disciplinary practices of law, engineering and planning, within legal frameworks, result in the use of static mechanisms which create inflexible responses to changing risk. Several enablers are identified that could create greater integration between the different scales of government, including better use of national policy instruments, shared professional experience, standardised information collection and risk assessment methods that address uncertainties. The framing of climate risk as dynamic and changing that differentiates activities over their lifetime, development of mechanisms to fund transitions towards transformational change, are identified as necessary conditions for delivering flexible responses over time.     

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests

An alkaline comet assay and a micronucleus test were carried out on erythrocytes of the European chub, Squalius cephalus L., collected in spring and autumn in 2005 and 2006 at three sampling sites in River Sava, near Zagreb, Croatia. The results of comet assay showed the lowest genotoxic influence at the least polluted site, while higher DNA damage was observed at the polluted sites. Although the basal levels of DNA damage were elevated, a clear gradation of DNA damage was found due to pollution intensity in all sampling periods. The lowest cytogenetic damage as revealed by the micronucleus test (MNT) was observed as well at the least polluted site. High variations in MN frequency were observed between sampling periods, although the number of micronucleated erythrocytes was consistently the highest one at the polluted site. The comet assay as a biomarker of genotoxic effect exhibited higher sensitivity in discriminating the genotoxic capacity of studied polluted sites while the MNT was less sensitive. However, both tests should be used together in biomonitoring studies because they can reveal different aspects of DNA damage; comet assay, the early event of genotoxic exposure, and MNT, its final result as a mutagenic potential.     

Compound-specific isotopic and congener-specific analyses of polychlorinated biphenyl in the heat medium and rice oil of the Yusho incident

Compound-specific isotope analysis (CSIA) can be used to examine the source and transformation processes of organic pollutants in the environment. We performed a carbon stable isotope analysis of polychlorinated biphenyl (PCB) congeners in the PCB heat-transfer medium (heat medium) and the original Kanechlor-400 (KC-400, a commercial brand of PCBs) involved in the Yusho incident. The main purpose is to investigate whether isotope fractionation occurred in the rice oil deodorization process that caused the incident. The carbon isotope ratios (δ¹³C values) of the targeted PCB congeners ranged from ? 29.39 to ? 27.00‰ in the heat medium and from ? 28.77 to ? 27.05‰ in the original KC-400. No significant differences were found in the δ¹³C values, suggesting carbon isotope fractionation did not occur for the targeted PCB congeners in the heat medium when deodorization of rice oil occurred at temperatures above 200 °C. Furthermore, we also conducted a congener-specific analysis of 64 PCB congeners found in the heat medium and rice oil contaminated by it. The total PCB congener concentrations were 503 mg/g in the heat medium and 81 μg/g in the rice oil. The concentrations of the highly chlorinated congeners were significantly lower in the heat medium than in the original KC-400, and the compositional ratios of the lowly chlorinated congeners were relatively lower in the rice oil than in the heat medium. These results suggest that the PCB congener patterns gradually changed from that of the original KC-400 in the deodorization process and subsequent contamination into the rice oil. Thus, a combination of CSIA and congener-specific analysis is a new approach for investigating the changing PCB congener profiles in samples from the Yusho incident.     

Healthcare waste management in the capital city of Mongolia

Inconsistencies are present in the management options for healthcare wastes in Mongolia. One of the first critical steps in the process of developing a reliable waste management plan requires the performance of a waste characterization analysis. The objectives of this study were an assessment of the current situation of healthcare waste management (HCWM) and characterization of healthcare wastes generated in Ulaanbaatar. A total about 2.65 tonnes of healthcare wastes are produced each day in Ulaanbaatar (0.78 tons of medical wastes and 1.87 tons of general wastes). The medical waste generation rate per kg/patient-day in the inpatient services of public healthcare facilities was 1.4-3.0 times higher than in the outpatient services (P<0.01). The waste generation rate in the healthcare facilities of Ulaanbaatar was lower than in some other countries; however, the percentage of medical wastes in the total waste stream was comparatively high, ranging from 12.5% to 69.3%, which indicated poor waste handling practices. Despite the efforts for the management of wastes, the current system of healthcare waste management in Ulaanbaatar city of Mongolia is under development and is in dire need of immediate attention and improvement. It is essential to develop a national policy and implement a comprehensive action plan for HCWM providing environmentally sound technological measures to improve HCWM in Mongolia.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

Degradation characteristics of a dibenzofuran-degrader Terrabacter sp. strain DBF63 toward chlorinated dioxins in soil

Nonylphenols (NPs) are the primary stable metabolites of alkylphenol polyethoxylates (APEs), a family of compounds widely used in industry and in some domestic products. As NPs accumulate in sediments in aquatic environments, the risk to benthic organisms needs to be assessed. In this study 4NP-spiked sediments were tested on larvae of the dipteran Chironomus riparius. First instar larvae obtained from populations at three different sources were used. To spike the sediments, an equilibration procedure between water and sediment was adopted to avoid the use of solvents. Lower 10-d LC50 values were determined for two populations of C. riparius from clean environments (315-465 and 315-350 microg g(-1) d.w., respectively) than those of a strain deriving from a population collected in a polluted river (600-680 microg g(-1) d.w.). Larval growth always decreased with increasing 4NP concentration but without any defined trend. The results of this study suggest that tolerance to the toxicant can be developed in populations of polluted environments and that testing procedures should be standardised.