Mg-Fe layered double hydroxide with chloride intercalated: synthesis,characterization and application for efficient nitrate removal

Environmental Science and Pollution Research - Mg-Fe layered double hydroxide intercalated with chloride (Mg-Fe-Cl LDH) was synthetized, characterized, and evaluated as adsorbent to remove nitrate...     

Synthesis of functionalized mesoporous material from rice husk ash and its application in the removal of the polycyclic aromatic hydrocarbons

Environmental Science and Pollution Research - The rice husk ash (RHA) was used as an alternative source of silica for the synthesis of the functionalized mesoporous material, which was used in the...     

Ultrasound effects on the activity of Aspergillus niger lipases in their application in dairy wastewater treatment

We evaluated the effect of ultrasound radiation on lipase activity. The experiments were conducted using a low‐cost crude enzyme extract. We then used this lipase to treat dairy effluent. The results of our study presented an increase of approximately 430% in the concentration of free fatty acids.     

Biosurfactants during in situ bioremediation: factors that influence the production and challenges in evalution

Research on the influence of biosurfactants on the efficiency of in situ bioremediation of contaminated soil is continuously growing. Despite the constant progress in understanding the mechanisms involved in the effects of biosurfactants, there are still many factors that are not sufficiently elucidated. There is a lack of research on autochthonous or exogenous microbial metabolism when biostimulation or bioaugmentation is carried out to produce biosurfactants at contaminated sites. In addition, studies on the application of techniques that measure the biosurfactants produced in situ are needed. This is important because, although the positive influence of biosurfactants is often reported, there are also studies where no effect or negative effects have been observed. This review aimed to examine some studies on factors that can improve the production of biosurfactants in soils during in situ bioremediation. Moreover, this work reviews the methodologies that can be used for measuring the production of these biocomposts. We reviewed studies on the potential of biosurfactants to improve the bioremediation of hydrocarbons, as well as the limitations of methods for the production of these biomolecules by microorganisms in soil.     

Determination of anti-anxiety and anti-epileptic drugs in hospital effluent and a preliminary risk assessment

In this study, an analytical methodology was developed for the determination of psycho-active drugs in the treated effluent of the University Hospital at the Federal University of Santa Maria, RS – Brazil. Samples were collected from point A (Emergency) and point B (General effluent). The adopted methodology included a pre-concentration procedure involving the use of solid phase extraction and determination by liquid chromatography coupled to mass spectrometry. The limit of detection for bromazepam and lorazepam was 4.9 ± 1.0 ng L⁻¹ and, for carbamazepine, clonazepam and diazepam was 6.1 ± 1.5 ng L⁻¹. The limit of quantification was 30.0 ± 1.1 ng L⁻¹, for bromazepam, clonazepam and lorazepam; for carbamazepine was 50.0 ± 1.8 ng L⁻¹ and was 40.0 ± 1.0 ng L⁻¹ for diazepam. The mean concentrations in the Emergency and General effluent treated currents were as follows: for bromazepam, 195 ± 6 ng L⁻¹ and 137 ± 7 ng L⁻¹; for carbamazepine, 590 ± 6 ng L⁻¹ and 461 ± 10 ng L⁻¹; for diazepam, 645 ± 1 ng L⁻¹ and 571 ± 10 ng L⁻¹; for lorazepam, 96 ± 7 ng L⁻¹ and 42 ± 4 ng L⁻¹; and for clonazepam, 134 ± 10 ng L⁻¹ and 57 ± 10 ng L⁻¹. A preliminary risk assessment was conducted: carbamazepine and diazepam require considerable attention owing to their environmental toxicity. The occurrence of these psychoactive-drugs and the environmental risks that they pose demonstrated the need for a more efficient treatment system. As far we are aware, there have been no comparable studies to this on the hazards of hospital effluents in Brazil, and very few that have carried out a risk assessment of psycho-active drugs in hospital effluent in general.     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.     

The impact of urbanization on tropical mangroves (Fortaleza,Brazil): Evidence from PAH distribution in sediments

This investigation represents the first environmental diagnosis of the distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments from a tropical mangrove in Fortaleza, northeastern Brazil. Sediment cores from six sampling stations in the Cocó and Ceará Rivers were retrieved in June-July 2006 to determine 17 priority PAHs. The total PAH concentrations (Σ_PAHs) ranged from 3.04 to 2234.76 μg kg^?1(Cocó River) and from 3.34 to 1859.21 μg kg^?1 (Ceará River). These levels are higher than those of other cities with more industrial development. PAH concentrations did not reach probable effect levels (PELs). However, from 4.5 to 87.5% of individual PAH concentrations can occasionally cause adverse biological effects for aquatic organisms. The PAH molecular ratios indicate that the PAHs in the sediment core were derived mainly from petroleum, wood, and charcoal combustion (pyrogenic source), and that atmospheric deposition and urban runoff may serve as important pathways for PAH input to the sediment. Clearly, the Σ_PAHs in sediments collected in the Cocó and Ceará Rivers indicate that ongoing pollution is more severe than past pollution.     

Risk assessment of trihalomethanes from tap water in Fortaleza, Brazil

The cancer risks (CR) by oral ingestion, dermal absorption, and inhalation exposure of trihalomethanes (THM) from tap water of ten districts in Fortaleza, Brazil were estimated. The mean levels of THM compounds were obtained in Fortaleza tap water as follow: 63.9 microg L(-1) for chloroform (CHCl(3)), 40.0 microg L(-1) for bromodichloromethane (CHBrCl(2)), and 15.6 microg L(-1) for dibromochloromethane (CHBr(2)Cl). Bromoform (CHBr(3)) was not detected. The mean CR for THMs in tap water is 3.96 x 10(-4). The results indicate that Fortaleza residents have a higher CR by inhalation than dermal absorption and oral ingestion. The CR for CHCl(3) contributes with 68% as compared with the total CR, followed by CHBrCl(2) (21%), and CHBr(2)Cl (11%). The hazard index (HI) is about ten times lower than unity, not indicating non-cancer effects.     

Composites Produced from Natural Rubber and Chrome-Tanned Leather Wastes: Evaluation of their In Vitro Toxicological Effects for Application in Footwear and Textile Industries

A new composite has been developed from natural rubber and chrome-tanned leather waste for use in footwear and textile industries. The contribution of this material to environmental quality and sustained development should be highligh because chrome tanned leather wastes, a major environmental problem, can be recycled. However, the safety of this new material for human use is questionable, as it is already well reported in the literature that chromium, particularly in its hexavalent oxidation state, can be genotoxic and carcinogenic to living beings. Thus, the aim of this study was to evaluate in vitro biocompatibility of this composite material for possible use in the footwear and textile industries, through cytotoxicity, cell adhesion, and genotoxicity tests. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure both concentrations of total and hexavalent chromium. Based on the findings, it was concluded that the composite exhibits low levels of cytotoxicity and genotoxicity, and possesses favorable properties for initial cell adhesion. Furthermore, it was verified that the composites released low concentrations of chromium and that the predominant species released would be trivalent chromium. The results of the present study open the possibility of the incorporation of solid residues of tanned leather into chromium without necessarily the chromium contained in these residues influences the toxicity and genotoxicity of this new material.