Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

The present study validates the oil-based paint bioremediation potential of Bacillus subtilis NAP1 for ecotoxicological assessment using a three-dimensional multi-species bio-testing model. The model included bioassays to determine phytotoxic effect, cytotoxic effect, and antimicrobial effect of oil-based paint. Additionally, the antioxidant activity of pre- and post-bioremediation samples was also detected to confirm its detoxification. Although, the pre-bioremediation samples of oil-based paint displayed significant toxicity against all the life forms. However, post-bioremediation, the cytotoxic effect against Artemia salina revealed substantial detoxification of oil-based paint with LD₅₀ of 121 μl ml^?1 (without glucose) and >?400 μl ml^?1 (with glucose). Similarly, the reduction in toxicity against Raphanus raphanistrum seeds germination (%FG?=?98 to 100%) was also evident of successful detoxification under experimental conditions. Moreover, the toxicity against test bacterial strains and fungal strains was completely removed after bioremediation. In addition, the post-bioremediation samples showed reduced antioxidant activities (% scavenging?=?23.5?±?0.35 and 28.9?±?2.7) without and with glucose, respectively. Convincingly, the present multi-species bio-testing model in addition to antioxidant studies could be suggested as a validation tool for bioremediation experiments, especially for middle and low-income countries.

?

     

Temporal variations of fine and coarse particulate matter sources in Jeddah,Saudi Arabia

This study provides the first comprehensive analysis of the seasonal variations and weekday/weekend differences in fine (aerodynamic diameter <2.5 μm; PM_2.5) and coarse (aerodynamic diameter 2.5–10 μm; PM_2.5–10) particulate matter mass concentrations, elemental constituents, and potential source origins in Jeddah, Saudi Arabia. Air quality samples were collected over 1 yr, from June 2011 to May 2012 at a frequency of three times per week, and analyzed. The average mass concentrations of PM_2.5 (21.9 μg/m³) and PM₁₀ (107.8 μg/m³) during the sampling period exceeded the recommended annual average levels by the World Health Organization (WHO) for PM_2.5 (10 μg/m³) and PM₁₀ (20 μg/m³), respectively. Similar to other Middle Eastern locales, PM_2.5–10 is the prevailing mass component of atmospheric particulate matter at Jeddah, accounting for approximately 80% of the PM₁₀ mass. Considerations of enrichment factors, absolute principal component analysis (APCA), concentration roses, and backward trajectories identified the following source categories for both PM_2.5 and PM_2.5–10: (1) soil/road dust, (2) incineration, and (3) traffic; and for PM_2.5 only, (4) residual oil burning. Soil/road dust accounted for a major portion of both the PM_2.5 (27%) and PM_2.5–10 (77%) mass, and the largest source contributor for PM_2.5 was from residual oil burning (63%). Temporal variations of PM_2.5–10 and PM_2.5 were observed, with the elevated concentration levels observed for mass during the spring (due to increased dust storm frequency) and on weekdays (due to increased traffic). The predominant role of windblown soil and road dust in both the PM_2.5 and PM_2.5–10 masses in this city may have implications regarding the toxicity of these particles versus those in the Western world where most PM health assessments have been made in the past. These results support the need for region-specific epidemiological investigations to be conducted and considered in future PM standard setting.

Implications: Temporal variations of fine and coarse PM mass, elemental constituents, and sources were examined in Jeddah, Saudi Arabia, for the first time. The main source of PM_2.5–10 is natural windblown soil and road dust, whereas the predominant source of PM_2.5 is residual oil burning, generated from the port and oil refinery located west of the air sampler, suggesting that targeted emission controls could significantly improve the air quality in the city. The compositional differences point to a need for health effect studies to be conducted in this region, so as to directly assess the applicability of the existing guidelines to the Middle East air pollution.     

Impact of Length of Dataset on Streamflow Calibration Parameters and Performance of APEX Model

Due to resource constraints, long‐term monitoring data for calibration and validation of hydrologic and water quality models are rare. As a result, most models are calibrated and, if possible, validated using limited measured data. However, little research has been done to determine the impact of length of available calibration data on model parameterization and performance. The main objective of this study was to evaluate the impact of length of calibration data (LCD) on parameterization and performance of the Agricultural Policy Environmental eXtender model for predicting daily, monthly, and annual streamflow. Long‐term (1984‐2015) measured daily streamflow data from Rock Creek watershed, an agricultural watershed in northern Ohio, were used for this study. Data were divided into five Short (5‐year), two Medium (15‐year), and one Long (25‐year) streamflow calibration data scenarios. All LCD scenarios were calibrated and validated at three time steps: daily, monthly, and annual. Results showed LCD affected the ability of the model to accurately capture temporal variability in simulated streamflow. However, overall average streamflow, water budgets, and crop yields were simulated reasonably well for all LCD scenarios.     

Biochemical and histopathological changes of Biomphalaria alexandrina snails exposed to bisphenol A

The effects of sub-lethal concentrations of bisphenol A on some biochemical parameters in Biomphalaria alexandrina snail's hemolymph and tissues as well as on histological changes of the hermaphrodite gland were evaluated. Adult snails were exposed to sub-lethal concentrations for four weeks and samples of snails were investigated after two and four weeks. Total protein and albumin levels in hemolymph, as well as lipid peroxidation and glutathione contents of snails’ tissues, were measured. After two weeks of exposure, total protein content and albumin levels decreased in all groups. Elevation of lipid peroxidation levels was correlated with decreasing glutathione content in the treated snails. Histological examination of the hermaphrodite gland revealed deformations in eggs and affected sperm production.     

Concentration of four heavy metals (cadmium, lead, mercury, and arsenic) in organs of two cyprinid fish (Cyprinus carpio and Capoeta sp.) from the Kor River (Iran)

Concentration of heavy metals in aquatic animals mainly occurs due to industrial contamination. In this study, the concentrations of four heavy metals (cadmium, lead, mercury, and arsenic) in organs of two cyprinid fish and in water collected from three sections of the Kor River, Iran were determined using the inductively coupled plasma method. Pathological and hormonal changes due to metal contamination were also measured. The concentrations of heavy metals in tissue of fish from the middle sampling zone were significantly higher (p?<?0.05) than those from the other two sampling zones, whereas no significant differences (p?>?0.05) were detected between the two sexes and species. High levels of metals were found in the ovaries and testes; estradiol in females and progesterone and testosterone in males from the middle study site were significantly (p?<?0.05) lower than values from the other two sites. Pathological changes in blood cells, liver, and kidneys of fishes were significantly higher in highly polluted areas (middle sampling zone). These results show that industrial activities have polluted the river and that the maximum concentrations of Cd, Pb, and Hg were higher than the permissible levels for human consumption.     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

Lateral dispersion in deflected emergent aquatic canopies

Environmental Fluid Mechanics - Understanding the mechanism of dispersion within plants is essential for proper operation of natural and constructed treatment wetlands. Plant deflection induced by...     

Review on industrial wastewater energy sources and carbon emission reduction: towards a clean production

This review provides an innovative approach of treating palm oil mill effluent (POME) from open pond and closed anaerobic sludge reactor for generation of green energy in the form of biogas containing methane. Improper techniques for the treatment and management of POME produce hazards to people and contribute to global warming. In all over the world, the total crude oil palm production in the countries like Malaysia, Indonesia, Africa, Latin America, Asian countries, Solomons and other were around 51, 31, 7, 6, 3, 2 and 1% compared with soya 41.8% and coconut 3.48%, respectively. In the year 2014–15, Malaysia generated at least 87.8 million tonnes of palm effluent per year. Various studies reveal that about 80% of palm effluent is disposed off partially treated in open dumps. The generated certified emission reductions (CERs) estimated and favoured the treatment of POME in anaerobic reactor by replacing open lagoon of aerobic system for cleaner production. The clean development mechanism (CDM) encourages the utilisation of upflow anaerobic sludge blanket reactors for POME treatment and methane capture to earn CER credits as a source of revenue.     

Polycentric agglomeration and haze pollution: evidence from China

Polycentric agglomeration has gradually become a salient feature of rapid growth in urbanization in China. Using province-level balanced panel data over the period 2000–18, we examine the impact of polycentric agglomeration on haze pollution and its mechanism of action. The results show that the impact of polycentric agglomeration on haze pollution exhibits a significant inverted U-shaped feature. Nevertheless, except for a few provinces where polycentric agglomeration exceeds the turning point, the degree of polycentric concentration in most provinces lies to the left of the turning point. Further, a mediating effect model illustrates that industrial structure rationalization and technological progress are effective paths through which polycentric agglomeration affects haze pollution. Finally, we demonstrate that the effect of polycentric agglomeration on haze pollution is influenced by transportation and communication infrastructure; improved transportation and communication infrastructure contributes to the haze control effect of polycentric agglomeration.

     

Subnational exposure to secondhand smoke in Iran from 1990 to 2013: a systematic review

Environmental Science and Pollution Research - Every year, almost eight million people die from tobacco-related diseases, among which around 1.2 million die from secondhand smoke (SHS) exposure....