Factors affecting the floristic diversity and nestedness in the islets of Lake Bardawil, North Sinai, Egypt: implications for conservation

Island biogeography theory and nestedness are two relevant and important concepts in biogeography and conservation. However, their integration and application has not been examined for maintaining or maximizing species diversity, especially in arid regions. The aim of this study is to investigate the ecological mechanisms related to the observed pattern of floristic diversity and nestedness in the Lake Bardawil islets on the Mediterranean coast of Sinai Peninsula before the execution of the North Sinai Agricultural Development Project (NSADP) that will threaten the ecosystem of the lake. Plant species on 15 islets were identified and categorized into ecological groups related to their life-form, salt tolerance and succulence. Richness of total plant species and their ecological groups were positively correlated with islet area, number of habitats and elevation, and negatively with disturbance index. The temperature calculator detected highly significant nestedness for the entire flora and all ecological groups. Distance from the mainland had no effect on either species richness or nested pattern of total plant species and their ecological groups. Both the analyses of species richness and nested distribution yielded evidence for a positive species-area relationship. Although nestedness was detected for the entire plant species and their ecological groups, many species and islets exhibited idiosyncratic distribution. Idiosyncrasies could be mainly attributed to demographic stochasticity which is an important character for species interaction and diversity maintenance in arid regions. Therefore, in developing conservation strategies for the Lake Bardawil islets, it is important to incorporate spatial and temporal stability of populations.     

Sequential UV-biological degradation of chlorophenols

The sequential UV-biological degradation of a mixture of 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP), and pentachlorophenol (PCP) was first tested with each pollutant supplied at an initial concentration of 50 mg l(-1). Under these conditions, the chlorophenols were photodegraded in the following order of removal rate: PCP>TCP>DCP>CP with only CP and DCP remaining after 40 h of irradiation. The remaining CP (41 mg l(-1)) and DCP (13 mg l(-1)) were then completely removed by biological treatment with an activated sludge mixed culture. Biodegradation did not occur in similar tests conducted with a non-irradiated mixture due to the high microbial toxicity of the solution. UV treatment lead to a significant reduction of the phytotoxicity to Lipedium sativum but no further reduction of phytotoxicity was observed after biological treatment. Evidence was found that the pollutants were partially photodegraded into toxic and non-biodegradable products. When the pollutants were tested individually (initial concentration of 50 mg l(-1)), PCP, TCP, DCP, 4-CP were photodegraded according to first order kinetic model (r2>99) with half-lives of 2.2, 3.3, 5.7, and 54 h, respectively. The photoproducts were subsequently biodegraded. This study illustrates the potential of UV as pre-treatment for biological treatment in order to remove toxicity and enhance the biodegradability of organic contaminants. However, it also shows that UV treatment must be carefully optimized to avoid the formation of toxic and/or recalcitrant photoproducts and results from studies conducted on single contaminants cannot be extrapolated to mixtures.     

Synthesis,Characterization and Application of Biodegradable Crosslinked Carboxymethyl Chitosan/Poly(Ethylene Glycol) Clay Nanocomposites

Crosslinked carboxymethyl chitosan (CMCh)/poly(ethylene glycol) (PEG) nanocomposites were synthesized using terephthaloyl diisothiocyanate as a crosslinking agent, in presence of montmorillonite (MMT), in different weight ratios of the two matrices. Characterization of nanocomposites was performed using different analyses. Swelling behavior was studied in different buffered solutions. It was found that formation of crosslinked CMCh/PEG nanocomposites increased the swell ability. Metal ions adsorption had also been investigated. The results indicated that crosslinked CMCh adsorbs various metal ions much more than non-crosslinked CMCh. Antimicrobial activity was examined against Gram-positive bacteria (S. aureus (RCMB 010027) and S. Pyogens (RCMB 010015), Gram-negative bacteria (E. coli (RCMB 010056), and also against fungi (A. fumigates (RCMBA 02564, G. candidum (RCMB 05096) and C. albicans (RCMB 05035). Data indicated that most of these nanocomposites exhibited good antimicrobial potency. Degradation studies were carried out in simulated body fluid for different time periods in order to find out the degradation index. Results showed that weight loss (%) of most of the nanocomposites increased as a function of incubation time.     

Assessment of water quality of some swimming pools: a case study in Alexandria, Egypt

In spite of the importance and popularity of swimming pools in summer, they have been identified as posing some public health risks to users due to either chemical or microbiological contamination. This study was carried out aiming at assessing the quality of water for some Alexandria's swimming pools in order to determine its compliance with the Egyptian standards no. 418/1995. Five swimming pools were selected randomly from different districts. Physical and chemical parameters, as well as biological examination of a total of 30 samples, were carried out using standard analytical methods. Water samples were collected from the studied swimming pools monthly over 6?months and pool water monitoring was carried out during afternoon of the weekends when the pools were most heavily used. The results indicated overall poor compliance with the standards. Compliance of the pool water to the microbial parameters, residual chlorine, pH, and turbidity were 56.7% (17 samples), 20% (6 samples), 46.7% (14 samples), and 46.7% (14 samples), respectively. Statistical analysis showed significant association between water contamination with microbial indicators and physical–chemical aspects such as residual chlorine, temperature, turbidity, and load of swimmers. Furthermore, Cryptosporidium oocysts and Giardia lamblia cysts has been found in 10% of samples. It was concluded that there is a need to improve disinfection and cleaning procedures, with consideration given to safety, and size of the pool in relation to bathing load. There is also a need to monitor swimming pool water quality continuously, and to increase bather hygienic practices and awareness of the risks as well as training of governmental inspectors.     

Sequential photochemical-biological degradation of chlorophenols

UV/TiO₂/H₂O₂, UV/TiO₂ and UV/H₂O₂ were compared as pre-treatment processes for the detoxification of mixtures of 4-chlorophenol (4CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) prior to their biological treatment. When each chlorophenol was initially supplied at 50 mg l⁻¹, UV/TiO₂/H₂O₂ treatment supported the highest pollutant removal, COD removal, and dechlorination efficiencies followed by UV/TiO₂ and UV/H₂O₂. The remaining toxicity to Lipedium sativum was similar after all pre-treatments. Chlorophenol photodegradation was always well described by a first order model kinetic (r² > 0.94) and the shortest 4CP, DCP, TCP and PCP half-lives of 8.7, 7.1, 4.5 and 3.3 h, respectively, were achieved during UV/TiO₂/H₂O₂ treatment. No pollutant removal was observed in the controls conducted with H₂O₂ or TiO₂ only. Inoculation of all the photochemically pre-treated mixtures with activated sludge microflora was followed by complete removal of the remaining pollutants. Combined UV/TiO₂/H₂O₂-biological supported the highest detoxification, dechlorination (99%) and COD removal (88%) efficiencies. Similar results were achieved when each chlorophenol was supplied at 100 mg l⁻¹. COD and Cl mass balances indicated UV, UV/H₂O₂, and UV/TiO₂ treatments lead to the formation of recalcitrant photoproducts, some of which were chlorinated.     

Quality of wastewater reuse in agricultural irrigation and its impact on public health

This study is planned to perform a sanitary survey of the largest sewage treatment plant in Riyadh, KSA, fortnightly for 6 months to examine its effluent quality as an example for the growing dependence on reuse of treated municipal wastewater in agricultural irrigation purposes to cope with increasing water shortage. The biological and physico-chemical parameters of 12 wastewater samples from the plant were examined using standard methods. The physico-chemical analysis indicated that the surveyed municipal wastewater treatment plant contained some of the studied parameters, such as turbidity, total suspended solids, biochemical oxygen demand, chemical oxygen demand and residual chlorine above the maximum permissible wastewater limits set by the Saudi Standards. However, heavy metal concentrations in all samples were lower than the recommended standards. Total and faecal coliform counts were above the permissible limits indicating poor sanitation level. Fifty percent of all wastewater samples were contaminated with faecal coliforms but, surprisingly, Escherichia coli were only detected in 8.3 % of the samples. Regular monitoring and enhancement of microbial and physico-chemical parameters of the wastewater quality served by different wastewater treatment plants for reuse in agricultural irrigation is recommended to preserve the environment and public health.     

Temporal variations of fine and coarse particulate matter sources in Jeddah,Saudi Arabia

This study provides the first comprehensive analysis of the seasonal variations and weekday/weekend differences in fine (aerodynamic diameter <2.5 μm; PM_2.5) and coarse (aerodynamic diameter 2.5–10 μm; PM_2.5–10) particulate matter mass concentrations, elemental constituents, and potential source origins in Jeddah, Saudi Arabia. Air quality samples were collected over 1 yr, from June 2011 to May 2012 at a frequency of three times per week, and analyzed. The average mass concentrations of PM_2.5 (21.9 μg/m³) and PM₁₀ (107.8 μg/m³) during the sampling period exceeded the recommended annual average levels by the World Health Organization (WHO) for PM_2.5 (10 μg/m³) and PM₁₀ (20 μg/m³), respectively. Similar to other Middle Eastern locales, PM_2.5–10 is the prevailing mass component of atmospheric particulate matter at Jeddah, accounting for approximately 80% of the PM₁₀ mass. Considerations of enrichment factors, absolute principal component analysis (APCA), concentration roses, and backward trajectories identified the following source categories for both PM_2.5 and PM_2.5–10: (1) soil/road dust, (2) incineration, and (3) traffic; and for PM_2.5 only, (4) residual oil burning. Soil/road dust accounted for a major portion of both the PM_2.5 (27%) and PM_2.5–10 (77%) mass, and the largest source contributor for PM_2.5 was from residual oil burning (63%). Temporal variations of PM_2.5–10 and PM_2.5 were observed, with the elevated concentration levels observed for mass during the spring (due to increased dust storm frequency) and on weekdays (due to increased traffic). The predominant role of windblown soil and road dust in both the PM_2.5 and PM_2.5–10 masses in this city may have implications regarding the toxicity of these particles versus those in the Western world where most PM health assessments have been made in the past. These results support the need for region-specific epidemiological investigations to be conducted and considered in future PM standard setting.

Implications: Temporal variations of fine and coarse PM mass, elemental constituents, and sources were examined in Jeddah, Saudi Arabia, for the first time. The main source of PM_2.5–10 is natural windblown soil and road dust, whereas the predominant source of PM_2.5 is residual oil burning, generated from the port and oil refinery located west of the air sampler, suggesting that targeted emission controls could significantly improve the air quality in the city. The compositional differences point to a need for health effect studies to be conducted in this region, so as to directly assess the applicability of the existing guidelines to the Middle East air pollution.