Silica-quaternary ammonium “Fixed-Quat” nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms(HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products(DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds(QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC(Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol–gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10~(-3) log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure.The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall,the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.     

Molecular approaches for the detection and monitoring of microbial communities in bioaerosols: A review

Bioaerosols significantly affect atmospheric processes while they undergo long-range vertical and horizontal transport and influence atmospheric chemistry and physics and climate change. Accumulating evidence suggests that exposure to bioaerosols may cause adverse health effects, including severe disease. Studies of bioaerosols have primarily focused on their chemical composition and largely neglected their biological composition and the negative effects of biological composition on ecosystems and human health. Here, current molecular methods for the identification, quantification, and distribution of bioaerosol agents are reviewed. Modern developments in environmental microbiology technology would be favorable in elucidation of microbial temporal and spatial distribution in the atmosphere at high resolution. In addition, these provide additional supports for growing evidence that microbial diversity or composition in the bioaerosol is an indispensable environmental aspect linking with public health.     

Pretreatment of automobile shredder residue (ASR) for fuel utilization

Automobile shredder residue (ASR) was pretreated to improve its quality for fuel utilization. Composition analysis revealed that ASR components could be classified into four groups: (1) urethane and textile-light fraction and combustibles containing low levels of ash and Cl; (2) plastics and rubber-light or heavy fraction and combustibles containing high levels of Cl; (3) metals and electrical wire-heavy fraction and incombustibles, and (4) particles smaller than 5.6mm with high ash contents. Based on these results, we successively performed sieving to remove particles smaller than 5.6mm, float and sink separations to reject the heavy fraction and plastics and rubber containing Cl, thermal treatment under an inert atmosphere to remove Cl derived from PVC, and char washing to remove soluble chlorides. This series of pretreatments enabled the removal of 78% of the ash and 91% of the Cl from ASR. Sieving using a 5.6-mm mesh removed a considerable amount of ash. Product quality was markedly improved after the float and sink method. Specifically, the sink process using a 1.1 g cm(-3) medium fluid rejected almost all rubber containing Cl and a large amount of PVC. The remaining Cl in char, after heating at 300 degrees C under an inert atmosphere and washing, was considered to be present as insoluble chlorides that volatilized at temperatures above 300 degrees C. Based on a tradeoff relationship between product quality and treatment cost, ASR may be utilized as a form of refuse plastic fuel or char.     

Barnacle suspension-feeding in variable flow

Suspension-feeding behavior of the adult barnacleSemibalanus balanoides (L.), collected at Woods Hole, USA, in 1987 and 1988, was studied in variable conditions of unidirectional and oscillating water flow. Barnacles growing on rocks were placed in a laboratory flume and exposed to precise patterns of water flow created with a specially designed electronic-circuit controlling a motor-driven propeller submersed in the flume. Laser darkfield and brightfield illumination were used to video-record the movement of suspended particles and dye in the flume and barnacle activity. When water was accelerated unidirectionally past feeding barnacles, they consistently changed feeding behavior from actively sweeping their thoracic appendages (cirri) through the water in slow-flow to passively holding cirri into the current in faster flow. The mean water velocity at which this behavioral switch occurred was 3.10 cm s^–1. In slow-flow, each active sweep of the cirri created a feeding vortex that caused suspended particles to swirl into the capture zone of the following sweep. Barnacles in simulated wave-action conditions (oscillatory flow) fed passively, and orientated extended cirri to flow direction. Cirri were rapidly reoriented with the same frequency at which flow direction reversed. Slow-motion analysis of one barnacle feeding in oscillating flow (0.65 Hz) indicated that reversal of the orientation of the cirri began 0.19 s before the water itself started to reverse direction. In additional experiments, barnacles were exposed to a repetitive pattern of accelerating-decelerating flow. During each flow cycle, barnacles switched from active to passive feeding as water accelerated. Repeated exposure of an individual to the same flow-cycle caused a consistent decrease in the water-velocity threshold at which the behavioral switch occurred.     

Constitutive expression of a high-affinity sulfate transporter in Indian mustard affects metal tolerance and accumulation

The Stylosanthes hamata SHST1 gene encodes a high-affinity sulfate transporter located in the plasma membrane. In this study the S. hamata SHST1 gene was constitutively expressed in Indian mustard [Brassica juncea (L.) Czern.] to investigate its importance for tolerance and accumulation of various oxyanions that may be transported by SHST1 and for cadmium, which is detoxified by sulfur-rich compounds. The transgenic SHST1 lines SHST1-12C and SHST1-4C were compared with wild-type Indian mustard for tolerance and accumulation of arsenate, chromate, tungstate, vanadate, and cadmium. As seedlings the SHST1 plants accumulated significantly more Cd and W, and somewhat more Cr and V. The SHST1 seedlings were less tolerant to Cd, Mo, and V compared to wild-type plants. Mature SHST1 plants were less tolerant than wild-type plants to Cd and Cr. SHST1 plants accumulated significantly more Cd, Cr, and W in their roots than wild-type plants. In their shoots they accumulated significantly more Cr and somewhat more V and W. Shoot Cd accumulation was significantly lower than in wild-type, and As levels were somewhat reduced. Compared to wild-type plants, sulfur accumulation was enhanced in roots of SHST1 plants but not in shoots. Together these results suggest that SHST1 can facilitate uptake of other oxyanions in addition to sulfate and that SHST1 mediates uptake in roots rather than root-to-shoot translocation. Since SHST1 overexpression led to enhanced accumulation of Cr, Cd, V, and W, this approach shows some potential for phytoremediation, especially if it could be combined with the expression of a gene that confers enhanced metal translocation or tolerance.     

Isolation,identification, Pb(Ⅱ) biosorption isotherms and kinetics of a lead adsorbing Penicillium sp. MRF-1 from South Korean mine soil

A heavy metal contaminated soil sample collected from a mine in Chonnam Province of South Korea was found to be a source of heavy metal adsorbing biosorbents. Chemical analyses showed high contents of lead (Pb) at 357 mg/kg and cyanide (CN) at 14.6 mg/kg in the soil. The experimental results showed that Penicillium sp. MRF-1 was the best lead resistant fungus among the four individual metal tolerant fungal species isolated from the soil. Molecular characterization of Penicillium sp. MRF-1 was determined using ITS regions sequences. E ects of pH, temperature and contact time on adsorption of Pb(II) by Penicillium sp. MRF-1 were studied. Favorable conditions for maximum biosportion were found at pH 4 with 3 hr contact time. Biosorption of Pb(II) gradually increased with increasing temperature. E cient performance of the biosorbent was described using Langmuir and Freundlich isotherms. Adsorption kinetics was studied using pseudo first-order and pseudo second-order models. Biosorbent Penicillium sp. MRF-1 showed the maximum desorption in alkali conditions. Consistent adsorption/desorption potential of the biosorbent in repetitive cycles validated the e cacy of it in large scale. SEM studies given notes on surface modification of fungal biomass under metal stress and FT-IR results showed the presence of amino groups in the surface structure of the biosorbent. In conclusion, the new biosorbent Penicillium sp. MRF-1 may potentially be used as an inexpensive, easily cultivatable material for the removal of lead from aqueous solution.     

地下水铀污染的原位微生物还原与固定:在美国能源部田纳西橡树岭放射物污染现场的试验

总结了美国斯坦福大学和橡树岭国家实验室等在美国能源部田纳西州橡树岭综合试验基地进行的铀污染原位微生物修复阶段性试验结果.本试验利用微生物以乙醇为电子供体还原地下水和沉积物中的六价铀为不溶解的四价铀,使之原位固定化.随后通过加入溶解氧和硝酸盐来试验微生物还原后的地下水层中还原固定态铀的稳定性.通过预处理和长期间隔注入乙醇...     

Historical trends of trace metals in a sediment core from a contaminated tidal salt marsh in San Francisco Bay

Sedimentation of metals preserves historical records of contaminant input from local and regional sources, and measurement of metals in sediment cores can provide information for reconstruction of historical changes in regional water and sediment quality. Sediment core was collected from Stege Marsh located in central San Francisco Bay (California, USA) to investigate the historical input of trace metals. Aluminum-normalized enrichment factors indicate that inputs from anthropogenic sources were predominant over natural input for Ag, Cu, Pb, and Zn. Among these, lead was the most anthropogenically impacted metal with enrichment factors ranging from 32 to 108. Depth profiles and coefficients of variation show that As, Cd, and Se were also influenced by anthropogenic input. The levels of these anthropogenically impacted metals decline gradually towards the surface due to regulation of the use of leaded gasoline, municipal and industrial wastewater discharge control, and closure of point sources on the upland of Stege Marsh. Although trace metal contamination is expected to be continuously declining, the rates of decline have slowed down. For lead, it is estimated to take 44, 82, and 153 years to decrease to probable effects level (112 μg/g), the San Francisco Bay ambient surface sediment level (43.2 μg/g), and the local baseline levels (5 μg/g), respectively. Some metals in surface sediments (0–6 cm) are still higher than sediment quality guidelines such as the probable effects level. To further facilitate the recovery of sediment quality, more efficient management plans need to be developed and implemented to control trace metals from non-point sources such as stormwater runoff.     

Exposure assessment of particulate matter and blood chromium levels in people living near a cement plant

This study evaluates the effect of air pollution caused by cement plants on nearby residential areas and performs an exposure assessment of particulate matter (PM) and total Cr, Cr⁶⁺, Pb, and Al. Further, the blood Cr levels of residents exposed to PM released by cement plants are also assessed. Nine buildings (eight residential and one elementary school building) close to cement plants were selected for this study, which were located in Pyeongtaek port, in west of Gyeonggi Province, South Korea. A total of 51 suspended particulate samples were collected at a flow rate of 2.0 L/min. Total Cr was more widely detected in residents’ houses and elementary schools. PM levels were higher at distances of 4.1 and 4.8 km than those at closer distances of 2.7 km. This was due to the influence of wind direction. The estimated mean blood level of Cr for the study participants was 3.80 μg/L, which is higher than levels estimated by other studies on Cr blood levels. Therefore, cement plants could cause an increase in total Cr and blood Cr levels in residential areas, and more continuous monitoring is necessary to better understand their impacts.