Metals and metalloids in PM10 in Nandan County,Guangxi, China,and the health risks posed

Intense mining, smelting, and tailing activities of polymetallic ore deposits have affected the environment in Nandan County, Guangxi, China. Samples of particulates with aerodynamic diameters low or equal 10 μm (PM₁₀) were collected in Nandan County to investigate the concentrations of and health risks posed by 17 metals and metalloids in the PM₁₀. The metal and metalloid concentrations were lower than those found in other industrial cities. The mean Cr concentration was 7.48 ng/m³. Significant higher metal and metalloid concentrations were found in PM₁₀ from mining areas (Dachang and Chehe) than from the control area (Liuzhai) (p < 0.05). Principal component analysis indicated that the main sources of Ba, Co, Cr, Fe, K, Mg, Mo, Na, and Sr were resuspension of the soil produced through mineral erosion, the main sources of As, Cd, Cu, Pb, Sb, and Zn were smelting and mining activities, and the main source of Ni was fossil fuel combustion. Higher non-carcinogenic and carcinogenic risks were posed in Dachang and Chehe than in Liuzhai. The non-carcinogenic risks posed to adults and children by individual metals and metalloids in PM₁₀ at all the sites were low, but the non-carcinogenic risks posed to children by all the metals and metalloids together exceeded the safe level (i.e., risk value > 1). The carcinogenic risks posed by Cd, Ni, and Pb were negligible at all sites, while As, Co, and Cr posed potential carcinogenic risks to the residents.

     

Stabilization of Cd-, Pb-, Cu- and Zn-contaminated calcareous agricultural soil using red mud: a field experiment

Red mud (RM) was used to remediate heavy metal-contaminated soils. Experiments with two different dosages of RM added to soils were carried out in this study. It was found that soil pH increased 0.3 and 0.5 unit with the dosage of 3 and 5% (wt%), respectively. At the dosage of 5%, the highest stabilization efficiencies for Cd, Pb, Cu and Zn reached 67.95, 64.21, 43.73 and 63.73%, respectively. The addition of RM obviously transferred Cd from the exchangeable fraction to the residual fraction. Meanwhile, in comparison with the control (no RM added), it reduced 24.38, 49.20, 19.42 and 8.89% of Cd, Pb, Cu and Zn in wheat grains at the RM addition dosage of 5%, respectively. At the same time, the yield of wheat grains increased 17.81 and 24.66% at the RM addition dosage of 3 and 5%, respectively. Finally, the addition of RM did not change the soil bacterial community. These results indicate that RM has a great potential in stabilizing heavy metals in calcareous agricultural soils.

     

Polycyclic aromatic hydrocarbons in urban street dust: sources and health risk assessment

Environmental Geochemistry and Health - Urban street dust samples from 49 sampling sites in Xuzhou (China) were collected and analyzed for 16 polycyclic aromatic hydrocarbons (PAHs) using gas...     

Organochlorines in urban soils from Central India: probabilistic health hazard and risk implications to human population

This study presents distribution of organochlorines (OCs) including HCH, DDT and PCBs in urban soils, and their environmental and human health risk. Forty-eight soil samples were extracted using ultrasonication, cleaned with modified silica gel chromatography and analyzed by GC-ECD. The observed concentrations of ∑HCH, ∑DDT and ∑PCBs in soils ranged between?<?0.01–2.54, 1.30–27.41 and?<?0.01–62.8 µg kg^?1, respectively, which were lower than the recommended soil quality guidelines. Human health risk was estimated following recommended guidelines. Lifetime average daily dose (LADD), non-cancer risk or hazard quotient (HQ) and incremental lifetime cancer risk (ILCR) for humans due to individual and total OCs were estimated and presented. Estimated LADD were lower than acceptable daily intake and reference dose. Human health risk estimates were lower than safe limit of non-cancer risk (HQ?<?1.0) and the acceptable distribution range of ILCR (10^?6–10^?4). Therefore, this study concluded that present levels of OCs (HCH, DDT and PCBs) in studied soils were low, and subsequently posed low health risk to human population in the study area.     

Insights on plant interaction between dominating species from patterns of plant association: expected covariance of pin-point cover measurements of two species

It has been suggested that in order to infer ecological processes from observed patterns of species abundance we need to investigate the covariance in species abundance. Consequently, an expression for the expected covariance of pin-point cover measurements of two species is developed. By comparing the observed covariance with the expected covariance we get a new type of information on the spatial arrangement of two species. Here the discrepancy between the observed and expected covariance may be thought of as a measure of the spatial configuration of the two species that may indicate underling ecological processes. The method is applied in a case study of Calluna vulgaris and Deschampsia flexuosa on dry heathland sites. The observed covariance of Calluna and Deschampsia at the level of the sites was positively and significantly correlated with the expected covariance. Negative covariance was observed on sites where both Calluna and Deschampsia had a high cover, which is in agreement with the notion that both species form distinct patches. Oppositely, at sites where both species have a low cover, we found that both the expected and observed covariance were positive. The proposed measure for the expected covariance of two species does capture information on the combined spatial configuration of the two species if the species are common. We show how this may be relevant for understanding the underlying ecological processes leading to the observed covariance.     

Halton iterative partitioning: spatially balanced sampling via partitioning

A new spatially balanced sampling design for environmental surveys is introduced, called Halton iterative partitioning (HIP). The design draws sample locations that are well spread over the study area. Spatially balanced designs are known to be efficient when surveying natural resources because nearby locations tend to be similar. The HIP design uses structural properties of the Halton sequence to partition a resource into nested boxes. Sample locations are then drawn from specific boxes in the partition to ensure spatial diversity. The method is conceptually simple and computationally efficient, draws spatially balanced samples in two or more dimensions and uses standard design-based estimators. Furthermore, HIP samples have an implicit ordering that can be used to define spatially balanced over-samples. This feature is particularly useful when sampling natural resources because we can dynamically add spatially balanced units from the over-sample to the sample as non-target or inaccessible units are discovered. We use several populations to show that HIP sampling draws spatially balanced samples and gives precise estimates of population totals.     

Recent shoreline evolution and beach erosion along the central Adriatic coast of Italy: the case of Molise region

A study on the modern dynamics and shoreline changes from 1954 to 2014 of the Molise coast (central Adriatic Sea) has been carried out. Short to long-term shoreline changes and associated surface area variations have been assessed in GIS environment for the study coast, subdivided in nine coastal segments (S1-S9), by using 100-m regularly spaced transects. In addition, the possible influence of natural and anthropogenic factors, especially of climatic variability and engineered shoreline defense structures, has been investigated. The Molise coast has experienced notable long-term erosion (period 1054-2014) that caused an overall coastal land loss of approximately 940,000 m². Erosion was, yet, limited to coastal segments S1 and S7, nearest to the mouths of major rivers, namely Trigno and Biferno, while the major part of the study coast has remained essentially stable or even advanced. Increased shoreline protection by defense structures has generally favoured shoreline stability and frequently generated shoreline advance, except for segments S1 and S7. Observed differences in shoreline change rates over time at the decadal to interannual scale, have not find a response in the analysis of available data on meteo-marine conditions of the Molise coast and climate variability indices, pointing out the need to improve knowledge on meteomarine conditions and on climatic variability forcing of the study area. From 2004 to 2014, the Molise shoreline remained essentially stable. Nonetheless, most recent shoreline changes (period 2011-2014) and modern shoreline dynamics indicate that erosion has become more widespread, involving at least part of segments S2-S3 and S8-S9, located south of the river mouth segments. The localized long-term shoreline retreat and most recent shoreline erosion appear to be primarily related to channel adjustments of the Biferno and Trigno rivers that occurred since the 1950s under the control of human interventions on the rivers, especially the construction respectively of a dam and a check dam along their lower courses, that trap of most of their solid load, affecting so adversely the sediment budget of the river mouths areas and adjacent beaches. Overall data acquired on the recent shoreline evolution and modern shoreline dynamics of the Molise coast and on related causal factors provide a good basic knowledge for regional coastal management purposes, and for further scientific purposes. Particularly, they suggest the opportunity to deepen a number of aspects such as the relationship between the coast and river catchments feeding it, the possible influences on the Molise shoreline dynamics of the neighbouring coasts, the efficiency/obsolescence of defense structures and the present-day vulnerability to coastal erosion of the Molise coast.     

Cosmogenic exposure dating constraints for coastal landslide evolution on the Island of Malta (Mediterranean Sea)

Landslides affecting the north-western coast of the Island of Malta have been investigated and monitored for 10 years. As a result of a bathymetric survey, it was discovered the deposits continued out onto the seafloor, thus raising questions as to the timing of their development. Furthermore it was uncertain as to which environment they developed in and which factors controlled their movements. The aim of this paper is to investigate representative detachments to chronologically constrain these mass movement events and outline their spatial and temporal evolution. Samples for exposure dating using the cosmogenic nuclide ³⁶Cl were collected from head scarps and blocks located within two long-term monitored landslides characterised by extensive block slides. The results indicate the oldest dated block detachment occurring in a subaerial environment at ca. 21 ka, when the sea level was about 130 m lower than at present. Mass movement possibly accelerated when sea level reached the landslide toe during the post-glacial marine transgression. Considering the timing of block movement, the landslide deposits observed today appear to be related to a first-time failure involving a large part of the slope, though and alternative hypothesis is also taken here into account. This main event is likely to have been followed by secondary movements influenced by toe undercutting and clay saturation due to rising sea level. However, further research on mass movement kinematics is required in order to model their evolution and explore whether this interpretation is widely applicable along the Maltese coast.     

The assessment of the coastal vulnerability and exposure degree of Gran Canaria Island (Spain) with a focus on the coastal risk of Las Canteras Beach in Las Palmas de Gran Canaria

The Coastal Vulnerability and Exposure Degree (CVED) of the Gran Canaria Island and the coastal risk of Playa de Las Canteras (Las Palmas de G.C.) have been assessed by means of a GIS analysis. The evaluation of coastal vulnerability (H) has been performed by using two different levels of analysis: the first one regarding the entire Island (Coastal Vulnerability Index method - CVI), the second one regarding specifically Las Canteras Beach, selected for its socio-economic importance (Coastal Vulnerability Assessment method - CVA). The application of the CVI method, based on geologic-geomorphologic and meteomarine data easily available, has allowed the regional scale assessment of coastal vulnerability (H) along the Gran Canaria coastline and, therefore, the individuation of more critical coast stretches deserving further analysis. The application of the CVA method, based on more specific morphologic-sedimentary beach features that allow to consider both the beach retreat due to storm surge and the coastal inundation due to run-up on the beach, has provided a large scale detail on the coastal vulnerability of Las Canteras Beach. Socio-economic and damage indexes have been determined for the 15 coastal municipalities included in the study area and, by means of the resulting matrix product, the degree of exposure (E_x) along the Gran Canaria coast has been assessed. Finally, the combination of coastal vulnerability and exposure levels has allowed to obtain the Coastal Vulnerability and Exposure Degree (CVED) for the entire Island and the risk levels that characterize specifically Las Canteras Beach. Major results in terms of CVED highlight prevailing low vulnerability and exposure levels along the western coast, and overall high vulnerability and exposure levels along the eastern coast, from Las Palmas de G.C. to San Bartolomé de Tirajana. The focus made on Playa de Las Canteras has allowed to identify the areas characterized by medium and high risk levels that represent approximately one third (940 m) of the entire beach and are located in its central part. The used two-level analysis approach has proved its efficiency by highlighting the degree of coastal vulnerability along the study coast and, especially, more critical coast stretches (CVI method) such as the Playa de Las Canteras that can be successfully analysed with the CVA approach allowing for a large-scale assessment of risk aspects, essential for a correct definition of priority management strategies. Results obtained with the present study, along with the awareness of the increasing phenomena of coastal erosion and marine flooding arising on the mid-long term due to the effects of global climate change, highlight the need for the competent public administrations of Gran Canaria to develop a strategic approach to coastal management and sustainable development that considers as a whole socio-economic values and natural resources, coastal vulnerability and exposure degree, and risk aspects.     

High-resolution geological cartography and coastal evolution assessment at Armação de Pêra – Galé sector: a prototype for a national coastal mapping

Portuguese coastal areas are of current major concern due to the continuous expansion of a strong urbanization, accentuated development of economic activities, resilient land use and general population growth. A particular attention has been given to the shoreline evolution, pointing out evidences of critical coastal sectors that are prone to suffer adverse consequences of climate changes direct impacts. Areas where climate change and sea-level rise effects will be stronger include, among others, coastal sectors associated to soft rocky or mobile substrate shores and/or low morphological shores with recognized marked erosion trend. Within this context, the knowledge of the geological setting is imperative as different lithologies have distinct resistance and behavior against marine erosion. The available digital geological Portuguese cartography at 1:25000 scale is not suitable to well characterize the geology within the context of small geographic areas or within the perspective of costal management. Hence, the National Laboratory of Energy and Geology (LNEG) developed a prototype to evaluate the potential of the integrated “geological and coastal hazard mapping” at a 1:3000 resolution scale. The combination of detailed geology and historical coastline displacement information, in a single map, constitute a new and valuable cartographic product to support coastal managers and general users of littoral regions. The application of the prototype to the entire Portuguese coastal areas will be carried out by LNEG and digital information will be available at LNEG GeoPortal (http://geoportal.lneg.pt/).