Conversion of waste plastics into value-added carbon materials

Plastic pollution is a major environmental issue worldwide, calling for advanced methods to recycle waste plastics in the context of the circular economy. Here we review methods and strategies to convert waste plastics into value-added carbon materials, with focus on sources, properties, pretreatment of waste plastics, and on preparation of carbon materials. Pretreatment techniques include mechanical crushing, plastic stabilization and electrospinning. Carbon materials such as carbon nanotubes, graphene, carbon nanosheets, carbon spheres and porous carbon are prepared by oxygen-limited carbonization, catalytic carbonization, the template-based method, and pressure carbonization. We emphasize the conversion of polyethene terephthalate, polyethylene, polypropylene, polystyrene, halogenated plastics, polyurethane and mixed plastics.

     

Mechanism of complexation of toxic arsenate,selenate, and molybdate with hydrotalcites

Environmental Chemistry Letters - Wastewater from the uranium mining industry contains toxic arsenate (AsO43–), selenate (SeO42–), and molybdate (MoO42–) that can be removed by...     

Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

望虞河西岸九里河中四种除草剂的污染现状

基于气相色谱-质谱联用(GC-MS)法结合固相萃取(SPE)前处理技术,建立了水中4种除草剂氯草定、阿特拉津、乙草胺和异丙甲草胺残留的分析方法,于2018年春(4、5月)、秋(9、10月)和冬(1、3月)季对太湖流域望虞河西岸九里河水体中4种除草剂的污染现状进行调查分析。结果表明,4种除草剂的加标回收率为71. 2%～108%,RSD均10%,方法检出限为3. 5～6. 0 ng/L。九里河水体中氯草定、阿特拉津、乙草胺和异丙甲草胺4种除草剂质量浓度分别为未检出～0. 025 7,0. 019 1～1. 19,未检出～0. 026 0和未检出～0. 094 3μg/L。4种除草剂中阿特拉津最高值接近《地表水环境质量标准》(GB 3838—2002)限值,其他3种其值较低,氯草定首次在太湖流域水体中检出。     

Enhanced arsenate removal from aqueous solution by Mn-doped MgAl-layered double hydroxides

Environmental Science and Pollution Research - In this study, Mn-doped MgAl-layered double hydroxides (LDHs) were successfully synthesized for efficient removal arsenate from aqueous solution. The...     

Nutrients Availability Shapes Fungal Community Composition and Diversity in the Rare Earth Mine Tailings of Southern Jiangxi,China

Russian Journal of Ecology - The present study characterized the nutrients availability of three rare earth tailings deserted in different time stages in Southern Jiangxi of China, and revealed the...     

聚硅酸钛制备及其助凝特性

采用在活化硅酸制备过程中加入适量Ti Cl4的方法,试制了一种新型无机高分子助凝剂—聚硅酸钛。研究了不同[Si]/[Ti]条件下制备的聚硅酸钛在固定p H值的水中分散物的粒径和Zeta电位随着活化时间的变化趋势,并与活化硅酸作比较。结果表明,在Si/Ti=20,活化48 h的条件下能制备出较为稳定的聚硅酸钛。与活化硅酸相比,聚硅酸钛在水中的分散物具有较大的粒径和更高的Zeta电位。通过对比制备的活化硅酸和聚硅酸钛的红外图谱发现,聚硅酸钛中有TiO-Si键,证明钛离子参与了聚合反应,新生成的化学键提高了它的聚合度和稳定性。采用硫酸铝为混凝剂,聚硅酸钛为助凝剂进行混凝除浊实验。测定了絮凝体的Zeta电位和混凝沉淀后的上清液浊度,研究了硫酸铝投加量和混凝p H对聚硅酸钛助凝效果的影响。结果表明,投加适量的聚硅酸钛助凝剂,明显提高了混凝除浊效果且拓宽了有效混凝p H值的范围。     

PVC/PES-g-PEGMA共混膜的制备及其耐污染性能

首先将聚乙二醇单甲基甲醚酯(PEGMA)接枝到聚醚砜(PES)上得到PES-g-PEGMA,然后利用溶液共混的方法,将聚氯乙烯(PVC)与PES-g-PEGMA共混,通过溶剂-非溶剂扩散诱导相分离法(NIPS)制备PVC/PES-g-PEGMA共混膜。在此基础上对PVC/PES-g-PEGMA共混膜的断面和表面微观结构、水通量、截留率、机械性能及耐污染等性能进行测试,并采用接触角,含水率(EWC),X射线光电子能谱仪(XPS)来表征PES-g-PEGMA的质量百分含量对PVC/PES-g-PEGMA共混膜亲水性的影响。结果表明,PVC/PES-g-PEGMA共混膜水通量,亲水性较纯PVC有很大程度的提高。耐污染性实验表明,随着PES-g-PEGMA的增加,耐污染性逐渐增强。实验结果同时也表明,该共混体系最佳共混比为7∶3。     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

《环境监测 分析方法标准制修订技术导则》(HJ 168—2010)对土壤环境监测标准制修订适用性探讨

针对土壤环境监测的复杂性和特殊性,从空白试验、检出限、方法验证、质量控制和标准文本等方面,指出了《环境监测分析方法标准制修订技术导则》《HJ 168—2010》对土壤环境监测标准制修订工作的适用性和执行中存在的问题。提出,为保证土壤标准制修订质量和标准执行质量,应研究适宜土壤监测方法标准的质量控制指标体系和评价体系,及时修订《HJ 168—2010》或发布补充要求;对现有土壤监测方法标准进行技术评估,加强对于土壤标准制修订工作的指导和监管。