Liquid household hazardous wastes in the United States: Identification,disposal, and management plan

Present methods of disposal of today's hazardous household chemicals in the United States are frequently not acceptable because of pathways to groundwater, surface water, and the atmosphere. This report identifies potentially hazardous liquid waste in the household, notes current disposal practices, and recommends an improved management plan that utilizes consumer education, manufacturer cooperation, and governmental intervention. Laws requiring uniform disposal labeling on packaging are critical. Local, county, and state governments must be encouraged to coordinate the necessary infrastructure. Managing hazardous household wastes now will mitigate potential disposal problems.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.     

Management practices that concentrate visitor activities: camping impact management at Isle Royale National Park,USA

This study assessed campsite conditions and the effectiveness of campsite impact management strategies at Isle Royale National Park, USA. Protocols for assessing indicators of vegetation and soil conditions were developed and applied to 156 campsites and 88 shelters within 36 backcountry campgrounds. The average site was 68 m2 and 83% of sites lost vegetation over areas less than 47 m2. We believe that management actions implemented to spatially concentrate camping activities and reduce camping disturbance have been highly successful. Comparisons of disturbed area/overnight stay among other protected areas reinforces this assertion. These reductions in area of camping disturbance are attributed to a designated site camping policy, limitation on site numbers, construction of sites in sloping terrain, use of facilities, and an ongoing program of campsite maintenance. Such actions are most appropriate in higher use backcountry and wilderness settings.     

Not seeing eye to eye: differences in supervisor and subordinate perceptions of and attributions for psychological contract breach

This study examines supervisor and subordinate perceptions of and attributions for psychological contract breach. The data suggest that supervisor and subordinate perceptions are most likely to differ on the extent to which the organization violated its obligations to provide fair pay, advancement opportunities, and a good employment relationship. In addition, the results indicate that the greater the degree of psychological contract breach reported by subordinates, the less committed they are to the organization and the lower their job performance (as rated by their supervisor). Moreover, when psychological contract breach is perceived, supervisors' and subordinates' attributions regarding the reasons for the breach are likely to differ. Specifically, the findings suggest that subordinates are more likely to attribute breach to the organization's intentional disregard for the commitments that it had made to the employee, while supervisors are more inclined to attribute breach to situations beyond the organization's direct control. Copyright © 2001 John Wiley & Sons, Ltd.     

ERODIBILITY OF URBAN BEDROCK AND ALLUVIAL CHANNELS,NORTH TEXAS1

ABSTRACT: Major erosion of urban stream channels is found in smaller basins in the North Texas study area with contributing drainage areas of less than ten square miles. Within these basins, four basic channel types are identified based on bed and bank lithologies: alluvial banks and bottoms, alluvial banks and gravel bottoms, alluvial banks with rock bottoms, and rock banks with rock bottoms. Most channels (75 percent) have alluvial banks with gravel or rock bottoms. Channel slopes are steep (.38 to.76 percent). Rock consists predominantly of shale and limestone. Channel cross sections are divided into the following four zones based on weathering, scour and entrainment mechanisms: soil zone, slake zone, rock zone and bed material zone. Erodibility of the channels is determined using multiple techniques including reach hydraulics and stream power computations, submerged jet testing, slab entrainment thresholds, and slake durability rates. Procedures are based on both empirical and modeled time series estimates of channel erosion. Field and modeled results support rates of erosion of up to four inches per year. Rates are tied to flow regime, climate, and type of channel bed and banks.     

ADJUSTMENT OF STREAM CHANNEL CAPACITY FOLLOWING DAM CLOSURE,YEGUA CREEK,TEXAS1

ABSTRACT: In Yegua Creek, a principal tributary of the Brazos River in Texas, surveys of a 19 km channel reach downstream of Somerville Dam show that channel capacity decreased by an average of 65 percent in a 34 year period following dam closure. The decrease corresponds with an approximately 85 percent reduction in annual flood peaks. Channel depth has changed the most, decreasing by an average of 61 percent. Channel width remained stable with an average decrease of only 9 percent, reflecting cohesive bank materials along with the growth of riparian vegetation resulting from increased low flows during dry summer months. Although large changes in stream channel geometry are not uncommon downstream of dams, such pronounced reductions in channel capacity could have long‐term implications for sediment delivery through the system.     

Evaluating regulatory issues and emission control equipment for air toxics applications

This article describes regulatory issues and emission control equipment for air toxics applications. A brief history of air quality legislation is provided, illustrating the difficulty government has had in implementing air quality statutes; this has contributed to the complexity of air quality regulations. Evaluation methodologies are described for three different emission control technologies: thermal oxidation, catalytic oxidation, and adsorption. Brief case histories are provided that describe the pitfalls and benefits associated with each technology. The benefits of integrating health risk assessment into an air quality program are also discussed.     

SPATIAL DISTRIBUTION OF POINT SOIL MOISTURE ESTIMATES USING LANDSAT TM DATA AND FUZZY-C CLASSIFICATION1

ABSTRACT: Many hydrologic models have input data requirements that are difficult to satisfy for all but a few well-instrumented, experimental watersheds. In this study, point soil moisture in a mountain watershed with various types of vegetative cover was modeled using a generalized regression model. Information on sur-ficial characteristics of the watershed was obtained by applying fuzzy set theory to a database consisting of only satellite and a digital elevation model (DEM). The fuzzy-c algorithm separated the watershed into distinguishable classes and provided regression coefficients for each ground pixel. The regression model used the coefficients to estimate distributed soil moisture over the entire watershed. A soil moisture accounting model was used to resolve temporal differences between measurements at prototypical measurement sites and validation sites. The results were reasonably accurate for all classes in the watershed. The spatial distribution of soil moisture estimates corresponded accurately with soil moisture measurements at validation sites on the watershed. It was concluded that use of the regression model to distribute soil moisture from a specified number of points can be combined with satellite and DEM information to provide a reasonable estimation of the spatial distribution of soil moisture for a watershed.     

Environmental planning,ecosystem science,and ecosystem approaches for integrating environment and development

Currently popular concepts such as sustainable development and sustainability seek the integration of environment and development planning. However, there is little evidence that this integration is occurring in either mainstream development planning or environmental planning. This is a function of the history, philosophies, and evolved roles of both. A brief review of the experience and results of mainstream planning, environmental planning, and ecosystem science suggests there is much in past scientific and professional practice that is relevant to the goal of integrated planning for environment and development, but still such commonly recommended reforms as systems and multidisciplinary approaches, institutional integration, and participatory, goal-oriented processes are rarely achieved. “Ecosystem approaches,” as developed and applied in ecology, human ecology, environmental planning, anthropology, psychology, and other disciplines, may provide a more transdisciplinary route to successful integration of environment and development. Experience with ecosystem approaches is reviewed, their advantages and disadvantages are discussed, and they are compared to traditional urban and regional planning, environmental planning, and ecosystem science approaches. Ultimately a synthesis of desirable characteristics for a framework to integrate environment and development planning is presented as a guide for future work and a criterion for evaluating existing programs.     

The team solution for effective project management

In their new book The TeamNet Factor: Bringing the Power of Boundary Crossing into the Heart of Your Business, authors Jessica Lipnack and Jeffrey Stamps claim that businesses that form teamnets—networks of teams that cross conventional boundaries—will be winners in the twenty-first century global economy. From the smallest to the largest companies, businesses are climbing over their own walls. Customers, competitors, and even people in different industries traverse their traditional limits to work together. When business teams cross boundaries, benefits accrue. Whether three-person shops or multinationals, these companies can achieve something that by themselves would be impossible. By definition, teamnets are on a mission for mutual benefit. Large firms in many industries are using internal teamnets to bridge barriers inside their companies and external teamnets to bridge boundaries with suppliers, customers, and competitors. The following excerpt presents insightful ideas and techniques for quality professionals on how to implement more effective project management through teams.