建设项目环境影响后评价的主要内容及存在的问题研究

根据《中华人民共和国环境影响评价法》的有关条款,探讨了建设项目环境影响后评价的定义、适用对象、工作内容、工作程序。同时,结合多年的环境管理经验,分析了典型行业环境影响后评价的重点,并指出了目前中国建设项目环境影响后评价存在的问题,提出了改进和完善的建议。实践表明,开展环境影响后评价有助于提高环境管理决策水平。     

旋流分离器油水分离效率的模拟研究

采用计算流体力学的方法,探讨了操作条件和物料特性对旋流分离器分离油水效率的影响。旋流器为单锥双入口,其主直径为50 mm,锥角为5.5°。模拟过程中,采用商业用软件‘Fluent 6.3’中的雷诺应力模型和欧拉多相流模型来模拟不同条件下油水旋流分离器的分离性能。模拟结果表明,对于本研究的油水旋流分离器,最佳的分流比是10%,最佳的油滴浓度是0.5%(V/V)。在最佳的分流比和油滴浓度下,当进口流速为10.46 m/s时,油水旋流分离器可将15μm的油滴去除80%以上,油滴的分离界限粒径d50(50%的分离效率)为9.2μm。在模拟的基础上,用统计软件STATISTICA6.0对分离效率与操作条件和物料特性之间的关系进行拟合。通过拟合式预测的分离效率与实测值相吻合,误差小于15%。     

改进型波形潜流人工湿地处理猪场废水

提出了一种改进型波形潜流人工湿地(improved wavy subsurface flow constructed wetland,IW-SFCW)并研究了该湿地系统在5个水力停留时间(hydraulic retention time,HRT)(2、3、4、6和8 d)下对猪场废水的处理效果。结果表明,该湿地系统对猪场废水中各污染物有较好的去除效果。在水力停留时间为4 d,进水COD、TN、NH4+-N和TP浓度分别为511、120、110和10 mg/L左右时,该湿地系统对COD、TN、NH4+-N和TP的去除率分别为86.0%、54.4%、70.1%和91.6%。此外,该湿地系统对废水中COD、TP的去除效率随水力停留时间的延长逐渐提高,在HRT=8 d时去除效果最好,去除率分别达到92.7%和96.8%;但对TN、NH4+-N的去除率却随水力停留时间的延长出现先上升后下降的趋势,在HRT=4 d时去除率最高,分别为54.4%和70.1%。     

IC反应器处理MTO废水的中试研究

中试研究了内循环(IC)反应器处理甲醇制烯烃(MTO)废水的启动和运行过程,同时考察了颗粒污泥的性状及沼气产量的变化情况。试验过程运行稳定,系统抗冲击性强。以絮状污泥为接种污泥,经过131 d的启动和运行,IC反应器的COD去除负荷可达10 kg/(m~3·d)以上,COD去除率可达90%以上。IC反应器中的成熟颗粒污泥形状规则、密实、粒径大、沉降速率快。IC反应器的沼气产量符合理论预期。     

长三角经济能源约束下的大气污染问题及对区域协作的启示

长三角地区大气污染治理取得一定成效,然而空气质量改善逐渐进入瓶颈期和攻坚期,大气污染治理战略需要从宏观层面系统谋划。本文系统分析了近10年来长三角区域经济、能源、产业、交通的发展状况和趋势,结合区域大气污染物浓度水平的演变,分析了大气污染与经济社会发展的耦合关系。结合当前区域空气污染的空间分布差异以及经济能源交通结构的内在差别,识别了大气污染的区内差异特征及关键制约因素。在此基础上,从能源结构和产业结构调整、交通结构优化、分区施策、深化治理等角度,为深化区域大气污染联防联控,持续改善大气污染问题提出了政策建议。     

马拉硫磷及其水解产物对圆瘤浮萍的生长抑制及氧化损伤作用

为了探讨马拉硫磷和主要水解产物对圆瘤浮萍的生长抑制作用及可能的氧化损伤机制,采用静态培养法,研究不同浓度的马拉硫磷及其水解产物二甲基二硫代磷酸酯(DMDTP)、二甲基硫代磷酸酯(DMTP)、二甲基磷酸酯(DMP)对圆瘤浮萍生长、叶绿素含量、叶绿体活性、超氧化物歧化酶(SOD)、过氧化物酶(POD)和过氧化氢酶(CAT)活性及丙二醛(MDA)含量的影响。结果表明,暴露7 d后,浓度为100 mg a.i.·L-1处理下的浮萍叶状体生长量与空白对照组无显著性差异;DMDTP、DMTP和DMP对圆瘤浮萍叶状体生长量的半数抑制浓度(7 d-IC50)分别为52.9、45.5和98.0 mg a.i.·L-1。随着试验液中DMDTP、DMTP和DMP浓度的升高,圆瘤浮萍叶绿素含量均明显降低,叶绿体活性则分别表现为诱导-抑制、抑制和抑制效应。在DMDTP、DMTP和DMP胁迫下,脂质过氧化产物丙二醛(MDA)含量明显增加;圆瘤浮萍体内的抗氧化酶系统均受到影响。总体表现为随着DMDTP浓度的增加,SOD活性先降低后升高;DMTP和DMP胁迫下,SOD活性呈现先降后升再降的趋势;POD和CAT活性则随3种水解产物浓度的增加呈现先升后降趋势;这表明抗氧化酶系统对外部胁迫的应答很复杂。马拉硫磷对圆瘤浮萍的毒性较小,其水解产物DMDTP、DMTP和DMP均对圆瘤浮萍的生长产生一定的毒性作用。在实际生产中,应多加关注马拉硫磷水解产物对环境生物的风险评估。     

Facile, effective, and environment-friendly degradation of sulfamonomethoxine in aqueous solution with the aid of a UV/Oxone oxidative process

The degradation of sulfamonomethoxine (SMM) in the aqueous environment by the combination of UV illumination and Oxone has been studied. Experimental results indicated that the UV illumination can effectively activate Oxone to produce sulfate-free radicals (SO₄ ^??). When 10 mmol L^?1 Oxone was added, 96.78 % removal of SMM (5 mg L^?1) was achieved within 90 min. Mineralization of SMM was investigated by measuring the total organic carbon, which decreased by 89.01 % after 90 min reaction. Six intermediate compounds generated during the SMM degradation were identified with the aid of liquid chromatography and mass spectroscopy, combined with proton nuclear magnetic resonance spectroscopy. A general reaction pathway for the degradation of SMM was proposed, where the presence of SO₄ ^?? remained crucial during the degradation process.     

质子化壳聚糖的除磷性能

壳聚糖是一类无毒无害的天然高分子絮凝剂,为了提高壳聚糖在污水处理中的除磷性能,采用硫酸溶液对壳聚糖进行质子化改性;考察了质子化度(硫酸溶液pH值)、吸附时间以及原水pH值对除磷效率的影响。研究结果表明,质子化度越大,总磷去除效率越高;在吸附时间为40～50 min的范围内,总磷去除率最大;原水pH值对质子化壳聚糖的总磷去除效率有明显影响,在质子化度较低时(硫酸溶液pH值≥3),随着原水pH值的增加,总磷去除率降低,在质子化度较高时(硫酸溶液pH值=2),在原水pH=6时,总磷去除率最大;质子化壳聚糖的吸附过程较好地遵循Lagergren准二级动力学模型和Langmuir吸附等温方程,吸附热力学参数ΔH<0,ΔG<0,ΔS<0,吸附过程表现为放热、自发的单分子层化学吸附过程。     

水位波动带氮素迁移转化规律

为考察水位波动对非饱和-饱和土层中氮素迁移转化的影响，设计土柱实验装置Ⅰ和Ⅱ分别模拟水位稳定与波动两种情景，测定一个水位波动周期内地下水中NO₃^--N、NO₂^--N和NH₄⁺-N浓度变化情况。结果表明，柱Ⅱ水位第1次下降柱内1^#，2^#，3^#，4^#采样点NO₃^--N浓度均增大，增幅分别为6.5%、14.9%、15.33%和19.8%。水位上升时结果相反，分别降低17.3%、26.15%、50.29%和44.61%。第2次水位下降至初始位置4个采样点NO₃^--N浓度再次增大，幅度分别为7.1%、10.6%、13.89%和7.76%。铵态氮呈相反趋势不同程度的变化。水位波动柱Ⅱ连通水槽内总氮量增加显著高于柱I水槽，即水位波动有利于波动带地下水中氮素垂向迁移，加重波动带以下地下水硝酸盐污染。因此，水位波动对氮素迁移转化的影响不容忽视。     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.