Bacteriophage Therapy for Critical and High-Priority Antibiotic-Resistant Bacteria and Phage Cocktail-Antibiotic Formulation Perspective

Food and Environmental Virology - Phage therapy is revolving to address the issues mainly dealing with antibiotic resistance in the pathogenic bacteria. Among the drug-resistant microbial...     

Comparative study on the effect of chemicals on Alternaria blight in Indian mustard--a multi-location study in India

High severity of Altemaria blight disease is a major constraint in production of rapeseed-mustard in India. The aim of this study was to investigate the suppressive potential of chemicals viz., zinc sulphate, borax, sulphur, potash and calcium sulphate, aqueous extracts viz., Eucalyptus globosus (50 g l-1) leaf extract and garlic (Allium sativum) bulb (20 g l-1) extract, cow urine and bio-agents Trichoderma harzianum, Pseudomonas fluorescence in comparison with the recommended chemical fungicide (mancozeb), against foliar disease Alternaria blight of Indian mustard [Brassica juncea (L.) Czern. and Coss] under five different geographical locations of India. Mancozeb recorded the lowest mean severity (leaf: 33.1%; pod: 26.3%) of Alternaria blight with efficacy of garlic bulb extract alone (leaf = 34.4%; pod = 27.3%) or in combination with cow urine (leaf = 34.2%; pod = 28.6%) being statistically at par with the recommended chemical fungicide. Chemicals also proved effective in reducing Alternaria blight severity on leaves and pods of Indian mustard (leaf = 36.3-37.9%; pod = 27.5-30.1%). The effective treatments besides providing significant reduction in disease severity also enabled increase in dry seed yield of the crop (mancozeb = 2052 kg ha-1; garlic = 2006 kg ha-1; control = 1561 kg ha-1).     

A review on applicability of naturally available adsorbents for the removal of hazardous dyes from aqueous waste

The effluent water of many industries, such as textiles, leather, paper, printing, cosmetics, etc., contains large amount of hazardous dyes. There is huge number of treatment processes as well as adsorbent which are available for the processing of this effluent water-containing dye content. The applicability of naturally available low cast and eco-friendly adsorbents, for the removal of hazardous dyes from aqueous waste by adsorption treatment, has been reviewed. In this review paper, we have provided a compiled list of low-cost, easily available, safe to handle, and easy-to-dispose-off adsorbents. These adsorbents have been classified into five different categories on the basis of their state of availability: (1) waste materials from agriculture and industry, (2) fruit waste, (3) plant waste, (4) natural inorganic materials, and (5) bioadsorbents. Some of the treated adsorbents have shown good adsorption capacities for methylene blue, congo red, crystal violet, rhodamine B, basic red, etc., but this adsorption process is highly pH dependent, and the pH of the medium plays an important role in the treatment process. Thus, in this review paper, we have made some efforts to discuss the role of pH in the treatment of wastewater.     

A perspective review on medicinal plant resources for their antimutagenic potentials

Environmental Science and Pollution Research - Mutagens present in the environment manifest toxic effects and are considered as serious threat for human health and healthcare. Recent reports reveal...     

Effect of integrating industrial and agricultural wastes on concrete performance with and without microbial activity

Environmental Science and Pollution Research - Cement is an essential material used in constructional activities. An emerging concern in the industry however is the CO2 emissions, which are...     

Targeting NLRP3 inflammasome as a chief instigator of obesity,contributing to local adipose tissue inflammation and insulin resistance

Environmental Science and Pollution Research - Inflammasome activity plays a vital role in various non-microbial disease states correlated with prolonged inflammation. NLRP3 inflammasome function...     

Geo-spatial analysis of land–water resource degradation in two economically contrasting agricultural regions adjoining national capital territory (Delhi)

The present study was aimed at characterizing the soil-water resource degradation in the rural areas of Gurgaon and Mewat districts, the two economically contrasting areas in policy zones-II and III of the National Capital Region (NCR), and assessing the impact of the study area's local conditions on the type and extent of resource degradation. This involved generation of detailed spatial information on the land use, cropping pattern, farming practices, soils and surface/ground waters of Gurgaon and Mewat districts through actual resource surveys, standard laboratory methods and GIS/remote sensing techniques. The study showed that in contrast to just 2.54% (in rabi season) to 4.87% (in kharif season) of agricultural lands in Gurgaon district, about 11.77% (in rabi season) to 24.23% (in kharif season) of agricultural lands in Mewat district were irrigated with saline to marginally saline canal water. Further, about 10.69% of agricultural lands in the Gurgaon district and 42.15% of agricultural lands in the Mewat district were drain water irrigated. A large part of this surface water irrigated area, particularly in Nuh (48.7%), Nagina (33.5%), and Punhana (24.1%) blocks of Mewat district, was either waterlogged (7.4% area with 0.05 ppm). In fact, sub-surface drinking waters of some areas around battery and automobile manufacturing units in Gurgaon and Pataudi blocks were associated with exceptionally high (>0.1 ppm) Ni concentrations. In general, the ground waters of waterlogged or potentially waterlogged areas in the rural areas of Mewat were more contaminated than the ground waters in the rural areas of Gurgaon district with deeper (>5 m) water depths.Though Cr concentrations in the surface and sub-surface irrigation waters of both Gurgaon and Mewat districts were far above the maximum permissible limit of 1 ppm, their bio-available soil-Cr concentrations were well within permissible limit. Even bio-available Ni concentrations in agricultural lands of Gurgaon district associated with Ni contaminated sub-surface irrigations were well within desirable limit of 0.20 ppm. This was primarily attributed to the calcareous nature of the soils of the study area. About 35% of Gurgaon district and 59% of Mewat district irrigated with poor quality waters were salt-affected. These waterlogged/potentially waterlogged calcareous-salt affected soils of Mewat district were having acute zinc (Zn) deficiency (<0.6 ppm). Some areas with extremely high iron (Fe: 20-25 ppm) and Mn (10-25 ppm) concentrations were also noticed in the Gurgaon, Nuh and Punhana blocks. Generation of reduced conditions owing to paddy cultivation in areas with 3-3.5 m water depths appeared to be the main cause of such point contaminations. Extensive cadmium (Cd) contamination was also noticed in the waterlogged sodic agricultural lands of Nagina village in Mewat district associated with a large scale scrap automobile and battery business. The study could document the processes and provide spatially accurate information to the managers (e.g., National Capital Region Planning Board) and the concerned citizen groups. It could, in fact, clearly point out that dumping of industrial and domestic wastewaters especially from NCT-Delhi into river Yamuna and, to some extent, from NCT-Delhi re-located hazardous industrial units into Najafgarh drain tributaries at Delhi-Gurgaon boundary, and poor "off-farm" water management practices were the main reasons for extensive (point/non-point source) land-water degradation in Gurgaon and Mewat districts of NCR.     

Use of recycled plastic in concrete: a review

Numerous waste materials are generated from manufacturing processes, service industries and municipal solid wastes. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. Solid waste management is one of the major environmental concerns in the world. With the scarcity of space for landfilling and due to its ever increasing cost, waste utilization has become an attractive alternative to disposal. Research is being carried out on the utilization of waste products in concrete. Such waste products include discarded tires, plastic, glass, steel, burnt foundry sand, and coal combustion by-products (CCBs). Each of these waste products has provided a specific effect on the properties of fresh and hardened concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing disposal problems. Reuse of bulky wastes is considered the best environmental alternative for solving the problem of disposal. One such waste is plastic, which could be used in various applications. However, efforts have also been made to explore its use in concrete/asphalt concrete. The development of new construction materials using recycled plastics is important to both the construction and the plastic recycling industries. This paper presents a detailed review about waste and recycled plastics, waste management options, and research published on the effect of recycled plastic on the fresh and hardened properties of concrete. The effect of recycled and waste plastic on bulk density, air content, workability, compressive strength, splitting tensile strength, modulus of elasticity, impact resistance, permeability, and abrasion resistance is discussed in this paper.     

Evaluation of air pollution tolerance index and anticipated performance index of plants and their application in development of green space along the urban areas

Air pollution due to vehicular emissions has become one of the most serious problems in the whole world and has resulted in huge threat to both the environment and the health of living organisms (plants, humans, animals, microorganisms). Plants growing along the roadsides get affected at the maximum as they are the primary recipients to different air pollutants and show varied levels of tolerance and sensitivity. Taking this into account, the present work was based on assessment of seasonal variation in air pollution tolerance index (APTI) and anticipated performance index (API) of four roadside plants, namely, Alstonia scholaris, Nerium oleander, Tabernaemontana coronaria, and Thevetia peruviana belonging to family Apocynaceae. APTI was calculated by the determination of four important biochemical parameters, viz., pH, relative water content (RWC), total chlorophyll (TChl), and ascorbic acid (AsA) content of leaves. The leaf samples were collected from plants growing at seven different sites of Amritsar (Punjab), India, for pre-monsoon and post-monsoon seasons. Highest APTI (82.14) was reported in N. oleander during the pre-monsoon season while the lowest was recorded in T. coronaria (18.59) in the post-monsoon season. On the basis of API score, A. scholaris was anticipated to be an excellent performer during the pre-monsoon and post-monsoon seasons followed by N. oleander, T. coronaria, and T. peruviana. Linear regression analysis and Pearson’s correlation coefficient depicted significant positive correlation between APTI and ascorbic acid content during the pre-monsoon and post-monsoon seasons.