Potential energy production from organic waste and its environmental and economic impacts at a tertiary institution in Palestine

Municipal solid waste (MSW) is one of the most well-known biomass resources that can be utilized to produce renewable energy. Numerous countries are plagued by the proliferation of waste, particularly organic waste that can be utilized for energy recovery. Palestine suffers from inefficient solid waste management, and only recently have a few projects focused on bioenergy production been implemented. Throughout the years, the city of Tulkarm experiences power outages which cause a challenge to the Palestine Technical University-Kadoorie campus in Tulkarm. Thus, the possibility of energy recovery from the organic portion in Palestine Technical University-Kadoorie was evaluated. The analysis of an economic impact included discussions of a number of economic aspects, including Levelized cost of energy, internal rate of return, present worth, annual worth, and payback period. On the other hand, a carbon dioxide savings analysis and gas emission were evaluated. The outcomes of the energy optimization demonstrated that the suggested system could supply the institution with an average of roughly 7 MWh of electrical energy. According to the economic study, this project offers 0.25 million dollars in present value, 0.144 million dollars in annual value, a 13 percent internal rate of return, a payback period of 6 years, and a levelized cost of energy of 0.11 dollars for each kWh generated. Additionally, the environmental assessment revealed that this system might reduce CO₂ emissions by around 8,343,778 tons. For effective waste management, energy recovery, and emission reduction, it is advised to implement anaerobic digestion technology.     

Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

A fuzzy goal programming with interval target model and its application to the decision problem of renewable energy planning

Environmental and Ecological Statistics - Optimizing sustainable renewable energy portfolios is one of the most complicated decision making problems in energy policy planning. This process involves...     

Biosynthesized silver nanoparticles regulate the iron status in the spleen of Plasmodium chabaudi–infected mice

Environmental Science and Pollution Research - Malaria is a dangerous disease affecting millions around the globe. Biosynthesized nanoparticles are used against a variety of diseases including...     

Protective effects of thymoquinone against acrylamide-induced liver,kidney and brain oxidative damage in rats

Environmental Science and Pollution Research - Acrylamide (AA), an industrial monomer, may cause multi-organ toxicity through induction of oxidative stress and inflammation. The antioxidant...     

Co-development of an integrated assessment framework to evaluate the effectiveness and impact of selected nature-based water treatment technologies in Sri Lanka,The Philippines,and Vietnam

Water quality is a critical challenge in Asia in the context of growing industrialization, urbanization, and climate change. Nature-based solutions (NbS) could play an important role in reducing urban water pollution, while generating multiple co-benefits that could make cities more liveable and resilient. In this regard, a number of pilot and demonstration projects have been set up to explore their potential across cities in Asia. Their effectiveness and impacts, however, have not been adequately documented, thus how they can be sustained, replicated and up-scaled remain poorly understood. This study aims to contribute to addressing this challenge by co-developing an integrated assessment framework and employing it to understand how existing evaluations of NbS in the region can be improved. It focuses specifically on a set of nature-based solutions that have been employed for water treatment across six cities in Southeast Asia (two in each Sri Lanka, the Philippines, and Vietnam), namely, floating wetlands, constructed wetlands and maturation ponds. The study also suggests specific methodologies for capturing a set of core indicators considered relevant for assessing the effectiveness and capturing the multi-faceted impacts of the examined NbS.     

Water,sanitation, hygiene and waste disposal practices as COVID-19 response strategy: insights from Bangladesh

Environment, Development and Sustainability - The COVID-19 pandemic has caused a global emergence, and the absence of a proven vaccine or medicine has led to the implementation of measures to...     

Toward a green economy: The nexus between economic and environmental factors in MENA countries,ARDL bounds approach

With the transition of the global economy toward a green economy, it is important to analyze the elements that can either support or impede this transformation. Therefore, in this study, we aimed to evaluate the potential of the green economy in the Middle East and North Africa (MENA) countries by analyzing the correlation between economic and environmental factors. The objective of this study is to explore the potential of the green economy in MENA countries by analyzing key factors such as access to clean fuel, GDP, and CO₂ emissions. The study aims to distinguish between long- and short-term effects, assess the presence of a long-run relationship or co-integration between the parameter estimates, and evaluate the progress of MENA countries toward a green economy based on the impact of economic, and environmental factors. Using quarterly and seasonally adjusted data from 2000 to 2018, the auto-regressive distributed lag (ARDL) technique was employed to examine the co-integration of the factors in the long and short terms. Multiple cointegration techniques were also used to determine the feasibility of a green economy by analyzing the relationship between access to clean fuel for technology and cooking, GDP, and CO₂ emissions. The study's findings indicate a clear long- and short-term relationship between the analyzed factors, as confirmed by the error correction model (ECM) which suggests that the variables are cointegrated and potentially relevant. Additionally, the result of the autoregressive distributed lag bound test shows that the green economy variables, GDP, CO₂ emissions, and access to clean fuel, are cointegrated in the long-term.     

Prevalence of Rotaviruses Groups A and C in Egyptian Children and Aquatic Environment

The objective of this study is to compare the prevalence of rotaviruses groups A and C in Egyptian children and aquatic environment. From 110 stool specimens of children with acute diarrhea and using RT-PCR, 35 samples (31.8 %) were positive for human rotavirus group A and 15 samples (13.6 %) were positive for human rotavirus group C. From 96 samples collected from Zenin wastewater treatment plant over a 2-year period (November 2009–October 2011) and using RT-PCR, rotavirus group A was detected in (4/24) 16.7 %, (5/24) 20.8 %, (4/24) 16.7 %, and (4/24) 16.7 %, while rotavirus group C was detected in (2/24) 8.3 %, (3/24) 12.5 %, (3/24) 12.5 %, and (0/24) 0 % in raw sewage, after primary sedimentation, after secondary sedimentation, and after final chlorination, respectively. Moreover, from 96 samples collected from El-Giza water treatment plant over a 2-year period (November 2009–October 2011), rotavirus group A was detected in (7/24) 29.2 %, (6/24) 25 %, (5/24) 20.8 %, and (3/24) 12.5 %, while rotavirus group C was detected in (3/24) 12.5 %, (1/24) 4.2 %, (1/24) 4.2 %, and (0/24) 0 % in raw Nile water, after sedimentation, after sand filtration, and after final chlorination, respectively. Using SYBR Green real-time RT-PCR, the number of human rotavirus group A genome or infectious units was higher than rotavirus group C. VP6 sequence analysis of the RT-PCR positive rotavirus group C samples revealed that four clinical specimens and three environmental samples showed similar sequences clustered with Moduganari/Human Nigerian strain AF 325806 with 98 % homology, and two clinical specimens and one environmental sample showed similar sequences clustered with Dhaka CB/Human Bangladesh strain AY 754826 with 97 % homology.     

Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1(V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy(FT-IR), thermogravimetry and differential thermal analysis(TG/DTA)and scanning electron microscopy(SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis(DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks.CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both Li P and Mn P activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16 S r DNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.