Ingestion and egestion of microplastic by aquatic insects in Egypt wastewater

Microplastics (MPs) are frequently regarded as environmental and biota contaminants. Yet, research on the accumulation of MPs in living entities, particularly aquatic insects that serve as food resources in the aquatic food chain, is limited. This study to investigate the accumulation of MPs in aquatic insects from water and sediment in an Egyptian wastewater basin. Four typical freshwater insect groups were used. The highest MP load per gram wet weight was reported by collector-gatherers (Chironomus sp. and Hydrophilus sp.), followed by collector-filterers (Culex sp.) with the second highest MP load. However, Predators (Aeshna sp.) had the lowest values. Also, the present results showed a reduction in the number of MPs in all insect taxa tested after a 24 h depuration time, with differences in the observed egestion ability. The mean number of MPs per individual significantly reduced after 24 h in both Chironomus sp. and Culex sp. larvae, where 53% and 40% of MPs particles were ejected from them, respectively. However, the ability of MP egestion decreases in Aeshna sp. nymph (25%), and the lowest proportion of ejection was observed in Hydrophilus sp. adults (9%). Polyethylene terephthalate fibers were the most abundant type of MP in both sediment and water, followed by fragments (polyethylene and polypropylene). Yet, only polyester fibers were detected in the various insect species. The average length of fibers in the various insects was somewhat shorter than in the surrounding environment. The current study reveals that MP ingestion by aquatic insects is not always related to levels of pollution in the environment, since other factors such as feeding strategies may play a role in MP ingestion. Based on these observations, further studies should be carried out on studies on toxicological impacts of MPs on freshwater/aquatic biota.     

Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Co-development of an integrated assessment framework to evaluate the effectiveness and impact of selected nature-based water treatment technologies in Sri Lanka,The Philippines,and Vietnam

Water quality is a critical challenge in Asia in the context of growing industrialization, urbanization, and climate change. Nature-based solutions (NbS) could play an important role in reducing urban water pollution, while generating multiple co-benefits that could make cities more liveable and resilient. In this regard, a number of pilot and demonstration projects have been set up to explore their potential across cities in Asia. Their effectiveness and impacts, however, have not been adequately documented, thus how they can be sustained, replicated and up-scaled remain poorly understood. This study aims to contribute to addressing this challenge by co-developing an integrated assessment framework and employing it to understand how existing evaluations of NbS in the region can be improved. It focuses specifically on a set of nature-based solutions that have been employed for water treatment across six cities in Southeast Asia (two in each Sri Lanka, the Philippines, and Vietnam), namely, floating wetlands, constructed wetlands and maturation ponds. The study also suggests specific methodologies for capturing a set of core indicators considered relevant for assessing the effectiveness and capturing the multi-faceted impacts of the examined NbS.     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

Water,sanitation, hygiene and waste disposal practices as COVID-19 response strategy: insights from Bangladesh

Environment, Development and Sustainability - The COVID-19 pandemic has caused a global emergence, and the absence of a proven vaccine or medicine has led to the implementation of measures to...     

Estimating Potential Climate Change Effects on the Upper Neuse Watershed Water Balance Using the SWAT Model

Climate change poses water resource challenges for many already water stressed watersheds throughout the world. One such watershed is the Upper Neuse Watershed in North Carolina, which serves as a water source for the large and growing Research Triangle Park region. The aim of this study was to quantify possible changes in the watershed’s water balance due to climate change. To do this, we used the Soil and Water Assessment Tool (SWAT) model forced with different climate scenarios for baseline, mid‐century, and end‐century time periods using five different downscaled General Circulation Models. Before running these scenarios, the SWAT model was calibrated and validated using daily streamflow records within the watershed. The study results suggest that, even under a mitigation scenario, precipitation will increase by 7.7% from the baseline to mid‐century time period and by 9.8% between the baseline and end‐century time period. Over the same periods, evapotranspiration (ET) would decrease by 5.5 and 7.6%, water yield would increase by 25.1% and 33.2%, and soil water would increase by 1.4% and 1.9%. Perhaps most importantly, the model results show, under a high emission scenario, large seasonal differences with ET estimated to decrease by up to 42% and water yield to increase by up to 157% in late summer and fall. Planning for the wetter predicted future and corresponding seasonal changes will be critical for mitigating the impacts of climate change on water resources.     

A fuzzy goal programming with interval target model and its application to the decision problem of renewable energy planning

Environmental and Ecological Statistics - Optimizing sustainable renewable energy portfolios is one of the most complicated decision making problems in energy policy planning. This process involves...     

Assessment of coastal ecosystems vulnerability to pollution: Algiers coast,Algeria

Coastal areas are frequently influenced by direct and/or indirect multiple anthropogenic pressures, which impacts marine life. Those perturbations may act in a heterogeneous way with a different intensity and are related to the complexity of coastal ecosystems. To visualize all these interactions at a local scale, a methodology inspired from many researches has been implemented in order to search, identify, and classify coastal ecosystems according to their sensitivity to anthropic pressure exerted by coastal cities. Thus, producing vulnerability maps will be essential tools to local coastal managers. We have applied this methodology on five coastal municipalities in Algiers. Firstly, the environmental sensitivity of coastal ecosystems was assessed by analyzing these four sub-indices: biological sensitivity, geomorphological sensitivity, hydrodynamic characteristics, and pollution intensity. Secondly, an assessment of the anthropogenic pressures presented by each municipality was carried out. Five sub-indexes have been taken into consideration when conducting this assessment: human activities, infrastructures, vectors of pollution, urbanization, and regulatory protection. Then, vulnerability maps were produced by the overlapping of sensitivity and anthropic pressure maps. The results assessed for the environmental vulnerability indicated that most areas are moderately to highly vulnerable, especially in the municipalities of Bab El Oued, Rais Hamidou, and Ain Bénian. The analysis of the obtained results shows the potential applicability of this methodology because they accurately reflect the reality. Therefore, these results can be useful to decision-makers by providing them with a relatively rational decision-making tool to prioritize future management and planning efforts.

     

Application of spatial analysis to investigate contribution of VOCs to photochemical ozone creation

Environmental Science and Pollution Research - This study was concerned with the temporal analysis of benzene, toluene, ethylbenzene, xylenes (BTEXs), and ozone in Rochester, New York, between 2012...