Leaching and degradation of 21 pesticides in a full-scale model biobed

Filling and cleaning of pesticide sprayers presents a potential risk of pollution of soil and water. Three different solutions for handling sprayers have been suggested: Filling and cleaning in the field, filling and cleaning on hard surfaces with collection of the waste water, and filling and cleaning on a biobed, which is an excavation lined with clay and filled with a mixture of chopped straw, sphagnum and soil with turf on top, and with increased sorption capacity and microbial activity for degradation of the pesticides. In the present study the degradation and leaching of 21 pesticides (5 g of each) was followed in an established full-scale model biobed. Percolate was collected and analysed for pesticide residues, and the biobed material was sampled at three different depths and analysed by liquid chromatography double mass spectrometry (LC-MSMS). During the total study period of 563 days, no traces of 10 out of 21 applied pesticides were detected in the percolate (detection limits between 0.02 and 0.9 μg l⁻¹) and three pesticides were only detected once and at concentrations below 2 μg l⁻¹. During the first 198 days before second application, 14% of the applied herbicide bentazone was detected in the leachate with maximum and mean concentrations of 445 and 172 μg l⁻¹, respectively. About 2% of the initial mecoprop and fluazifop dose was detected in the percolate, with mean concentrations of 23 μg l⁻¹, while MCPA and dimethoate had mean concentrations of 3.5 and 4.7 μg l⁻¹, respectively. Leachate concentrations for the remaining pesticides were generally below the detection limit (0.02–0.9 μg l⁻¹, below 1% of applied). Sorption studies of five pesticides showed that compounds with a low K_d value appeared in the leachate. After 169 days, all pesticides in the biobed profile were degraded to a level below 50% of the calculated initial dose. Pesticides with K_oc values above 100 were primarily found in the uppermost 10 cm and degraded slowest due to the low bioavailability. The 11 most degradable pesticides were all degraded such that less than 3% remained in the biobed after 169 days.

Following second pesticide application of the biobed, leachate was sampled 215 and 365 days after the treatment. This showed the same pesticides to be leached out and at concentrations comparable to those of the first treatment. The same pesticides as after the first treatment were retained in the biobed.     

Field evaluation of digital optical method to quantify the visual opacity of plumes

Visual Determination of the Opacity of Emissions from Stationary Sources (Method 9) is a reference method established by U.S. Environmental Protection Agency (EPA) to quantify plume opacity. However, Method 9 relies on observations from humans, which introduces subjectivity. In addition, it is expensive to teach and certify personnel to evaluate plume opacity on a semiannual basis. In this study, field tests were completed during a "smoke school" and a 4-month monitoring program of plumes emitted from stationary sources with a Method 9 qualified observer to evaluate the use of digital photography and two computer algorithms as an alternative to Method 9. This Digital Optical Method (DOM) improves objectivity, costs less to implement than Method 9, and provides archival photographic records of the plumes. Results from "smoke school" tests indicate that DOM passed six of eight tests when the sun was located in the 140 degrees sector behind one of the three cameras, with the individual opacity errors of 15% or less and average opacity errors of 7.5% or less. DOM also passed seven of the eight tests when the sun was located in the 216 degrees sector behind another camera. However, DOM passed only one of the eight tests when the sun was located in the 116 degrees sector in front of the third camera. Certification to read plume opacity by a "smoke reader" for 6 months requires that the "smoke reader" pass one of the smoke school tests during smoke school. The average opacity errors and percentage of observations with individual opacity errors above 15% for the results obtained with DOM were lower than those obtained by the smoke school trainees with the sun was located behind the camera, whereas they were higher than the smoke school trainee results with the sun located in front of the camera. In addition, the difference between plume opacity values obtained by DOM and a Method 9 qualified observer, as measured in the field for two industrial sources, were 2.2%. These encouraging results demonstrate that DOM is able to meet Method 9 requirements under a wide variety of field conditions and, therefore, has potential to be used as an alternative to Method 9.     

Teil IV: Nachwachsende Rohstoffe als Alternative zu Kunststoffen

This paper presents a Life Cycle Assessment of a hemp fibre reinforced component for automotive parts. Its aim is to identify the optimisation strategies within the product system and also provide decision support for automotive engineers for or against the employment of renewable raw materials within the production process. The investigated life cycle contains the agricultural cultivation of the fibre plant, the method of harvesting and the processing of the crop. The analysis includes the further processing of the fibre, i.e. the manufacturing of the fibre composite matrix, on which the production of form press components for the automotive industry is based. Manufacturing the required preproducts is also taken into account. The differences of energy demand (CED) and emission amount during the use phase of a passenger car and different disposal options for the end of the life cycle (deposition or incineration) are assessed as well. It is shown that the natural fibre composite is ecologically preferable to the injection moulded reference as the results of the Eco-indicator 95 method show. Optimisation is necessary for the epoxy-resin-hardener system, although the cultivation of fibre plants is ecologically an insignificant process regarding the system boundaries. The weight difference and resulting energy savings during the use phase of a car reveal further advantages of a fibre panel.     

Comparative Uptake of Enteric Viruses into Spinach and Green Onions

Root uptake of enteric pathogens and subsequent internalization has been a produce safety concern and is being investigated as a potential route of pre-harvest contamination. The objective of this study was to determine the ability of hepatitis A virus (HAV) and the human norovirus surrogate, murine norovirus (MNV), to internalize in spinach and green onions through root uptake in both soil and hydroponic systems. HAV or MNV was inoculated into soil matrices or into two hydroponic systems, floating and nutrient film technique systems. Viruses present within spinach and green onions were detected by RT-qPCR or infectivity assays after inactivating externally present viruses with Virkon^®. HAV and MNV were not detected in green onion plants grown up to 20 days and HAV was detected in only 1 of 64 spinach plants grown in contaminated soil substrate systems up to 20 days. Compared to soil systems, a drastic difference in virus internalization was observed in hydroponic systems; HAV or pressure-treated HAV and MNV were internalized up to 4 log RT-qPCR units and internalized MNV was shown to remain infectious. Understanding the interactions of human enteric viruses on produce can aid in the elucidation of the mechanisms of attachment and internalization, and aid in understanding risks associated with contamination events.     

Occurrence and rates of terminal electron-accepting processes and recharge processes in petroleum hydrocarbon-contaminated subsurface

The occurrence and rates of terminal electron acceptor processes, and recharge processes in the unsaturated zone of a boreal site contaminated with petroleum hydrocarbons in the range C(10) to C(40) were examined. Soil microcosms were used to determine the rates of denitrification, iron (Fe) reduction, sulfate (SO(4)) reduction, and methanogenesis in two vertical soil profiles contaminated with oil, and in a noncontaminated reference sample. Furthermore, the abundances of the 16S rRNA genes belonging to Geobacteracaea in the samples were determined by real-time quantitative polymerase chain reaction (PCR). Analyses of ground water chemistry and soil gas composition were also performed together with continuous in situ monitoring of soil water and ground water chemistry. Several lines of evidence were obtained to demonstrate that both Fe reduction and methanogenesis played significant roles in the vertical profiles: Fe reduction rates up to 3.7 nmol h(-1) g(-1) were recorded and they correlated with the abundances of the Geobacteracaea 16S rRNA genes (range: 2.3 x 10(5) to 4.9 x 10(7) copies g(-1)). In the ground water, ferrous iron (Fe(2+)) concentration up to 55 mg L(-1) was measured. Methane production rates up to 2.5 nmol h(-1) g(-1) were obtained together with methane content up to 15% (vol/vol) in the soil gas. The continuous monitoring of soil water and ground water chemistry, microcosm experiments, and soil gas monitoring together demonstrated that the high microbial activity in the unsaturated zone resulted in rapid removal of oxygen from the infiltrating recharge thus leaving the anaerobic microbial processes dominant below 1.5 m depth both in the unsaturated and the saturated zones of the subsurface.     

Frog occupancy of polluted wetlands in urban landscapes

Urban sprawl and the rising popularity of water-sensitive urban design of urban landscapes has led to a global surge in the number of wetlands constructed to collect and treat stormwater runoff in cities. However, contaminants, such as heavy metals and pesticides, in stormwater adversely affect the survival, growth, and reproduction of animals inhabiting these wetlands. A key question is whether wildlife can identify and avoid highly polluted wetlands. We investigated whether pond-breeding frogs are attempting to breed in wetlands that affect the fitness of their offspring across 67 urban wetlands in Melbourne, Australia. Frog species richness and the concentration of contaminants (heavy metals and pesticides) were not significantly related, even in the most polluted wetlands. The proportion of fringing vegetation at a wetland had the greatest positive influence on the number of frog species present and the probability of occurrence of individual species, indicating that frogs inhabited wetlands with abundant vegetation, regardless of their pollution status. These wetlands contained contaminant levels similar to urban wetlands around the world at levels that reduce larval amphibian survival. These results are, thus, likely generalizable to other areas, suggesting that urban managers could inadvertently be creating ecological traps in countless cities. Wetlands are important tools for the management of urban stormwater runoff, but their construction should not facilitate declines in wetland-dependent urban wildlife.     

Walrus history around the North Water: Human–animal relations in a long-term perspective

This article highlights the relationship between walruses and humans in and around the North Water polynya in a long-term perspective. The present study draws on a combination of biological, archaeological, archaeo-zoological, historical, and ethnographic sources covering the period from the 8th century ad to the late 20th century. The study demonstrates that the walrus was an important resource of meat, blubber, and other products throughout all the studied periods, if always supplemented by other kinds of game. It is suggested that walrus distribution and behaviour, as well as hunting strategies and technologies historically constituted a powerful component not only in forming human action and social life in the region but also in serving as an imaginative resource. It is further argued that the walrus and the walrus hunt still play a significant role in the present community living on the edge of the North Water, even if the hunt is increasingly circumscribed due to changing ice conditions.     

The influence of cosolvent and heat on the solubility and reactivity of organophosphorous pesticide DNAPL alkaline hydrolysis

The presented research concerned the compatibility of cosolvents with in situ alkaline hydrolysis (ISAH) for treatment of organophosphorous (OPP) pesticide contaminated sites. In addition, the influence of moderate temperature heat increments was studied as a possible enhancement method. A complex dense non-aqueous phase liquid (DNAPL) of primarily parathion (~50 %) and methyl parathion (~15 %) obtained from the Danish Groyne 42 site was used as a contaminant source, and ethanol and propan-2-ol (0, 25, and 50 v/v%) was used as cosolvents in tap water and 0.34 M NaOH. Both cosolvents showed OPP solubility enhancement at 50 v/v% cosolvent content, with slightly higher OPP concentrations reached with propan-2-ol. Data on hydrolysis products did not show a clear trend with respect to alkaline hydrolysis reactivity in the presence of cosolvents. Results indicated that the hydrolysis rate of methyl-parathion (MP3) decreased with addition of cosolvent, whereas the hydrolysis rate of ethyl-parathion (EP3) remained constant, and overall indications were that the hydrolysis reactions were limited by the rate of hydrolysis rather than NAPL dissolution. In addition to cosolvents, the influence of low-temperature heating on ISAH was studied. Increasing reaction temperature from 10 to 30 °C provided an average rate of hydrolysis enhancement by a factor of 1.4–4.8 dependent on the base of calculation. When combining 50 v/v% cosolvent addition and heating to 30 °C, EP3 solubility was significantly enhanced and results for O,O-diethyl-thiophosphoric acid (EP2 acid) showed a significant enhancement of hydrolysis as well. However, this could not be supported by para-nitrophenol (PNP) data indicating the instability of this product in the presence of cosolvent.

     

A comparison of three empirically based, spatially explicit predictive models of residential soil Pb concentrations in Baltimore, Maryland, USA: understanding the variability within cities

In many older US cities, lead (Pb) contamination of residential soil is widespread; however, contamination is not uniform. Empirically based, spatially explicit models can assist city agencies in addressing this important public health concern by identifying areas predicted to exceed public health targets for soil Pb contamination. Sampling of 61 residential properties in Baltimore City using field portable X-ray fluorescence revealed that 53 % had soil Pb that exceeded the USEPA reportable limit of 400 ppm. These data were used as the input to three different spatially explicit models: a traditional general linear model (GLM), and two machine learning techniques: classification and regression trees (CART) and Random Forests (RF). The GLM revealed that housing age, distance to road, distance to building, and the interactions between variables explained 38 % of the variation in the data. The CART model confirmed the importance of these variables, with housing age, distance to building, and distance to major road networks determining the terminal nodes of the CART model. Using the same three predictor variables, the RF model explained 42 % of the variation in the data. The overall accuracy, which is a measure of agreement between the model and an independent dataset, was 90 % for the GLM, 83 % for the CART model, and 72 % for the RF model. A range of spatially explicit models that can be adapted to changing soil Pb guidelines allows managers to select the most appropriate model based on public health targets.