超高压工程电缆绝缘油对海洋生物的生态毒性效应

随着超高压联网工程建设项目不断增多,取得巨大经济效益的同时,其电缆安全性日益受到关注。采用标准实验方法,研究电缆绝缘油对8种占据不同生态位的海洋生物(费氏弧菌(Vibrio fischeri)、牟氏角毛藻(Chaetoceros mueleri)、卤虫(Artemia sp.)、蒙古裸腹溞(Moina mongolica)、凡纳滨对虾(Litopenaeus vannamei)、裸项栉鰕虎鱼(Ctenogobius gymnauchen)、双齿围沙蚕(Perinereis aibuhitensis)、菲律宾蛤仔(Ruditapes philippinarum))的急性毒性,同时进行了电缆绝缘油对裸项栉鰕虎鱼14 d延长毒性实验和电缆绝缘油对蒙古裸腹溞的慢性毒性。结果表明,电缆绝缘油在50%饱和溶解浓度下未对费氏弧菌产生明显的发光抑制作用;对牟氏角毛藻、凡纳滨对虾、裸项栉鰕虎鱼、双齿围沙蚕和菲律宾蛤仔等5种生物未表现出急性毒性影响,其LC50均大于饱和浓度;对卤虫的96 h-LC50为17.07%,LOEC为12.5%,NOEC为6.25%;对蒙古裸腹溞96 h-LC50为29.75%,LOEC为25.0%,NOEC为12.5%;电缆绝缘油对卤虫和蒙古裸腹溞有剧毒。对裸项栉鰕虎鱼成鱼14 d延长毒性LC50大于500 000 mg·L~(-1);对蒙古裸腹溞母溞存活数的NOEC为625μg·L~(-1),LOEC为1 250μg·L~(-1);对母溞存活期的NOEC为312μg·L~(-1),LOEC为625μg·L~(-1);对产胎数的NOEC为625μg·L~(-1),LOEC为1 250μg·L~(-1);对产幼溞数的NOEC为625μg·L~(-1),LOEC为1 250μg·L~(-1)。     

表观遗传学机制与空气污染的健康效应

空气污染是一个全球性的问题,并且具有深远的环境影响。暴露于空气污染会对人体健康产生许多不同的影响,理解空气污染的健康效应又是一个复杂命题,既要考虑不同类型的污染物同时也要考虑相关疾病的复杂性。然而越来越多的研究表明,表观遗传学在空气污染相关疾病的发生、发展中发挥着重要的作用。空气污染物可引起DNA甲基化、组蛋白修饰和miRNA表达等表观遗传学改变,这种改变往往发生在疾病产生的早期,因此相关研究不仅可以了解疾病的发病机制,而且还为疾病早期诊断和预防筛选可能的标志物。本文综述了表观遗传学的几种修饰方式和空气污染物造成不良健康损伤机制的一些研究进展。     

应用概率物种敏感度分布法研究太湖重金属水生生物水质基准

目前广泛使用的水质基准推导方法—物种敏感度分布法存在曲线拟合模型不确定、曲线拟合效果不佳、种内差异欠考虑、基准值不准确等诸多问题,概率物种敏感度分布法可有效解决上述问题。应用概率物种敏感度分布法构建了太湖水体中5种重金属Ag、Pb、Cd、Hg和Zn的概率物种敏感度分布曲线,在此基础上得到了保护水生生物的急性水质基准分别为1.079μg·L~(-1)、637.973μg·L~(-1)、19.465μg·L~(-1)、8.729μg·L~(-1)和105.506μg·L~(-1),慢性水质基准分别为0.108μg·L~(-1)、63.797μg·L~(-1)、1.947μg·L~(-1)、2.340μg·L~(-1)和52.753μg·L~(-1);不同类群间生物对重金属的敏感度存在差异,不同重金属对同一类群生物的毒性也存在差异;通过与国内外已有的重金属水质基准值比较,发现水质基准具有明显的区域性,目前基于国外水质基准或我国整体水域特点来制定的太湖水质标准,往往造成对太湖水生生物欠保护或过保护的状况。     

电子垃圾重金属污染及防治对策研究

随着信息产业的飞速发展,电子产品更新换代加速,电子垃圾飞速增长,电子垃圾中的重金属对环境造成了越来越严重的污染.本文回顾了广东贵屿与浙江台州两大电子垃圾回收拆解区重金属污染的现状,分析了电子产品原材料、加工工艺和电子垃圾不当回收导致重金属污染的原因,提出了依靠政策法规引导、借鉴国外先进经验、进行电子垃圾回收处理产业化发展的相应防治对策,以期能改善电子垃圾导致的重金属污染.     

滁州地区覆盖层厚度对场地地震动参数的影响

以滁州地区近百个钻孔资料为原型建立土层模型,采用一维频域等效线性化波动方法进行了土层地震反应分析,重点分析了覆盖层厚度对场地地震动参数的影响。研究结果表明,随着覆盖层厚度的增加,地表峰值加速度及土层放大系数逐渐增大,当覆盖层厚度超过一定值时,地表峰值加速度及土层放大系数呈逐渐缓慢减小的趋势;而反应谱特征周期总体上随着覆盖层厚度的增加而逐渐增大。     

吉林油田稠油热采污水处理絮凝剂实验研究＊

在含油污水水质分析的基础上,采用烧杯实验和分光光度法研究絮凝剂的絮凝效果。筛选出以无机絮凝剂硫酸铝与两性高分子聚合物CE-3090的复配体系,同时研究了影响絮凝效果的因素并探究了其影响机理。结果表明:在温度为40℃,pH为7.72,170 r/min时高速搅拌1 min,然后50 r/min低速搅拌5 min,硫酸铝的加量为90 mg/L、CE-3090的加量为0.5 mg/L,絮凝沉降30 min后其絮凝效果较好。实验证明:该复配处理剂处理含油污水后,含油量和杂质含量都达到了SY/T 5329-94《碎屑岩油藏注水水质推荐指标及分析方法》油田污水回注的要求。     

Distribution and transport characteristics of fine particulate matter in beijing with mobile lidar measurements from 2015 to 2018

Accurately quantifying the concentration and transport flux of atmospheric fine particulate matter (PM_2.5) is vital when attempting to thoroughly identify the pollution formation mechanism. In this study, the mobile lidar measurements in Beijing on heavily polluted days in December from 2015 to 2018 are presented. The lidar was mounted on a vehicle, which could perform measurements along designated routes. On the basis of mobile lidar measurements along closed circuits of the 6th Ring Road around Beijing, the spatial distribution and transport flux of PM_2.5 in Beijing were determined with information of wind field. In the spatial distribution, both the concentration and transport of PM_2.5 were revealed to be more significant in the southern section of Beijing. The regional transport layer at heights < 1.3 km plays an important role in pollution formation. The maximum transport flux reached 1600 μg/(m²*sec) on 11 December 2016. With the aerosol boundary layer height determined from the image edge detection (IED) method, the inter-annual variations of the aerosol boundary layer height (ABLH) were also analysed. The ABLH decreased from 0.73 to 0.46 km during the same heavy pollution period from 2015 to 2018. Increasingly adverse aerosol boundary layer (ABL) meteorological factors, including lower ABLH, light winds, temperature inversions, and accumulated moisture, have become necessary for pollution formation in Beijing.     

Chemical characterization and source identification of PM2.5 in Luoyang after the clean air actions

Luoyang is a typical heavy industrial city in China, with a coal-dominated energy structure and serious air pollution. Following the implementation of the clean air actions, the physicochemical characteristics and sources of PM_2.5 have changed. A comprehensive study of PM_2.5 was conducted from October 16, 2019 to January 23, 2020 to evaluate the effectiveness of previous control measures and further to provide theory basis for more effective policies in the future. Results showed that the aerosol pollution in Luoyang in autumn and winter is still serious with the average concentration of 91.1 μg/m³, although a large reduction (46.9%) since 2014. With the contribution of nitrate increased from 12.5% to 25.1% and sulfate decreased from 16.7% to 11.2%, aerosol pollution has changed from sulfate-dominate to nitrate-dominate. High NO₃⁻/SO₄²⁻ ratio and the increasing of NO₃⁻/SO₄²⁻ ratio with the aggravation of pollution indicating vehicle exhaust playing an increasingly important role in PM_2.5 pollution in Luoyang, especially in the haze processes. Secondary inorganic ions contributed significantly to the enhancement of PM_2.5 during the pollution period. The high value of Cl⁻/Na⁺ and EC concentration indicate coal combustion in Luoyang is still serious. The top three contributor sources were secondary inorganic aerosols (33.3%), coal combustion (13.6%), and industrial emissions (13.4%). Close-range transport from the western and northeastern directions were more important factors in air pollution in Luoyang during the sampling period. It is necessary to strengthen the control of coal combustion and reduce vehicle emissions in future policies.     

企业料场喷淋抑尘系统

针对某球团厂料场在堆、取料时产生的扬尘,采用先进的喷雾重力降尘技术和PLC控制技术,对料场进行定点、定时、定量喷淋,抑尘效果显著.     

Effects of particle size on the adsorption behavior and antifouling performance of magnetic resins

Environmental Science and Pollution Research - Adequately choosing the physicochemical characteristics of adsorbent is crucial in improving its adsorption performance. This work investigated the...