Associations between ambient high temperatures and suicide mortality: a multi-city time-series study in China

Environmental Science and Pollution Research - Suicide prevention has become a public health issue of great concern. Previous studies proved that ambient temperature had an impact on suicide death,...     

16S rDNA克隆文库解析AO-MBR系统中细菌种群多样性

采用分子生物学手段16S rDNA克隆文库方法对缺氧/好氧膜生物反应器(AO-MBR)的好氧池与缺氧池中细菌进行了多样性研究.实验结果表明,好氧池污泥样品的克隆文库包括9个类群,其中变形菌(Proteobacteria)和拟杆菌(Bacteroidetes)在文库中所占比例最大,分别为37.04％和14.81％;其次是酸杆菌(Acidobacteria)、未培养菌(uncultured bacterium)、绿菌(Chlorobi)和未培养的绿弯菌(uncultured Chloroflexi bacterium)、浮霉状菌(Planctomycetes),分别为11.11％、11.11％、7.41％、7.41％和5.56％;硝化螺旋菌(Nitrospirae)和裸藻门(Euglenozoa)所占比例相对较小,均为1.85％.缺氧池样品克隆文库包括10个类群,其中变形菌(Proteobacteria)、拟杆菌(Bacteroidetes)和未培养菌(uncultured bacterium)在文库中所占比例最大,分别为27.91％、13.95％和12.79％;其次是浮霉状菌(Planctomycetes)、酸杆菌(Acidobacteria)和绿弯菌(Chloroflexi),在文库中所占比例分别为9.3％、9.3％和9.3％;硝化螺旋菌(Nitrospirae)、裸藻门(Euglenozoa)、芽单胞菌(Gemmatimonadetes)和放线菌(Actinobacteria)所占比例相对较少,分别为6.98％、8.14％、1.16％和1.16％.两池细菌的主要类群相似,但菌属及比例有所差异,变形菌是系统中的主要脱氮菌属.     

家居室内设计及新进展的思考

在对传统室内设计基本观点阐述与理解的基础上分析其整体性、可持续发展,并着重探讨在物质文明和精神文明高度发展的今天,现代室内设计在个性化、自然性、现代性、艺术性等方面发展的新趋势.通过对现代室内设计特点和发展趋势的分析,创造出一个适合人们现代生活的理想空间.     

Identifying the land use and land cover change drivers: methods and case studies of two forest reserves in Northern Benin

Environment, Development and Sustainability - Land use and land cover change (LULCC) is one of the problems that the world has been facing for the last few decades despite political attention....     

BiOBr分子印迹材料的制备及其降解诺氟沙星性能

为了有效处理低浓度抗生素残留废水,以水热法制备的BiOBr为载体,诺氟沙星（NOR）为模板,通过表面分子印迹法制备了BiOBr分子印迹材料（MIP）.同时,采用SEM与XRD对制备的材料进行相分析及显微结构分析,并利用XPS、FTIR、BET和UV-Vis DRS对所合成材料的微观结构进行观察.最后,以诺氟沙星（NOR）为目标污染物,对MIP在暗反应下的吸附性能及300 W Xe灯照射下的光催化性能进行测定,并探讨pH、投加量、初始浓度、是否印迹处理对NOR去除的影响.实验结果表明,在pH为中性,MIP投加量为2.5 g·L^-1的条件下,MIP对5 mg·L^-1 NOR溶液的去除率达到96.2%,且对低浓度（1 mg·L^-1）NOR溶液的去除率达到99%.综合表明,本文所制备的MIP适用于低浓度诺氟沙星废水的处理.     

Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure. As an important treatment method for emulsions, chemical demulsification is faced with challenges such as low flocs–water separation rates and high sludge production. Hence, in this study, Fe₃O₄ magnetic nanoparticles (MNPs) were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field. The addition of MNPs significantly decreased the time required to attain sludge–water separation and sludge compression equilibrium, from 210 to 20 min. In addition, the volume percentage of sludge produced at the equilibrium state was reduced from 45% to 10%. This excellent flocculation–separation performance was stable over a pH range of 3–11. The magnetization of the flocculants and oil droplets to form a flocculant–MNP–oil droplet composite, and the magnetic transfer of the composite were two key processes that enhanced the separation of cutting emulsions. Specifically, the interactions among MNPs, flocculants, and oil droplets were important in the magnetization process, which was controlled by the structures and properties of the three components. Under the magnetic field, the magnetized flocculant–MNP–oil droplet composites were considerably accelerated and separated from water, and the sludge was simultaneously compressed. Thus, this study expands the applicability of magnetic separation techniques in the treatment of complex waste cutting emulsions.     

Regulated emission characteristics of in-use LNG and diesel semi-trailer towing vehicles under real driving conditions using PEMS

On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH_4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH_4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.     

基于地形位置指数的赤水河流域植被时空变化研究

地形因子和植被覆盖是区域灾害评价的关键指标,也是山区型村镇建设生态安全评估的重要内容.为探析山区型村镇建设的生态约束条件,以赤水河流域为研究对象,基于1998—2018年SPOT_VGT NDVI数据,利用地形位置指数（Topographic Position Index,TPI）和坡度位置指数方法,研究了赤水河流域植被生长季NDVI时空变化及地形分异特征.结果表明:①赤水河流域内,1998—2018年植被生长季平均NDVI呈缓慢上升趋势,斜率为0.004 7;NDVI>0.60的集中连片区域主要分布在古蔺县北部、赤水市大部和习水县西北部,占赤水河流域总面积的8.42%;Sen's slope在0.009~0.015区间时,赤水河流域植被生长增强趋势最明显,主要集中分布在赤水河中上游、二道河以及下游的大同河干流地区.②TPI在-39.4~34.3区间的面积最多,为6 221.63 km2,占赤水河流域总面积的34.05%;将赤水河流域坡度类型划分为山脊、上坡、中坡、平坡、下坡、山谷6个坡度位置类型,其中,中坡面积（7 792.02 km2）最大,占流域总面积的42.64%,表明TPI数值较小且坡度大于5°的区域是赤水河流域地形主体.③赤水河流域植被在山脊的平均NDVI最高,为0.747,且山脊平均Sen's slope最高,为0.007 2;山谷平均NDVI最低,为0.709.研究显示,赤水河流域植被分布在118.5~486.9的TPI区间或分布在山脊处时整体生长较好,且生长增强趋势最明显.      

兰州市区大气中TSP及其成分含量的测定与变化规律的研究

报导了兰州市一年内大气中TSP及其成分含量的监测结果、污染程度和变化规律,为兰州市进一步治理大气污染,加强环境管理,提高环境质量提供了科学依据。     

多介质环境目标值的应用

本文概述了多介质目标德的SAM/Ⅰ的方法。多介质目标值包括环境目标值和排放目标值。点源分析包括SAM/ⅠA,SAM/ⅠB,SAM/Ⅰ,SAM/Ⅱ。在缺少环境质量标准的情况下,使用多介质环境目标值有较强的适用性,且具有省时、省力、经济等特点。本文将多介质目标值的SAM/ⅠA点源分析方法引入聚氯乙烯生产废水的环境评价中,取得较为满意的结果。