Electrical and electronic waste management in China: progress and the barriers to overcome.

Serious adverse impacts on the environment and human health from e-waste recycling have occurred in the past and continue to occur in China today, due to a lack of national management strategies. China has made great efforts to face the challenges of the approaching peak increase in the domestic generation of e-waste and the illegal shipment of e-waste from other countries. This study examined recent progress and analysed the main problems associated with this issue in China. It was found that the material and the financial flows of e-waste in China had their own specific characteristics. Nearly 60% of the generated e-wastes were sold to private individual collectors and passed into informal recycling processes. More than 90% of Chinese citizens are reluctant to pay for the recycling of their e-waste. This is due to their traditional understanding that there remained value in these end-of-life products. Regulations concerning e-waste in China have been drafted but their deficiencies are obvious. The extended producer responsibilities (EPR) have been introduced but are not well defined. Eight formal facilities have been planned and are under construction or are in operation along the eastern coast of China but it will be difficult for them to compete with the informal processes for the reasons identified during the study.     

Report on hazardous household waste generation in Japan.

Surveys of over 2000 households in Japan were conducted to investigate the characteristics of hazardous household waste (HHW) generation. In Japan, about 2.5 to 4.3 kg of HHW are produced per tonne of the residential waste stream. The percentage of used batteries in HHW was over 50%. Every household using spray (aerosol) cans had more than seven cans on average. The generation of HHW, in terms of both quantities and type of waste produced, appeared to vary with dwelling type. Detached dwelling residents tended to store HHW such as used batteries, whereas apartment residents tended not to store waste. The amounts of discarded HHW were larger at the end of the year in comparison with other months. The data accumulated were used to estimate the quantities of HHW disposed off annually, and the quantities and type of waste that might be received by a typical depot collection programme in Japan.     

Geographical genetic structure and phylogeography of the <Emphasis Type="Italic">Sargassum horneri</Emphasis>/<Emphasis Type="Italic">filicinum</Emphasis> complex in Japan,based on the mitochondrial <Emphasis Type="Italic">cox3</Emphasis> haplotype

The genetic structure and phylogeography of the brown seaweed Sargassum horneri/filicinum complex in Japan were studied based on the mitochondrial cox3 haplotype. The cox3 haplotypes found were divided into three clades in a statistical parsimony network, among which there were large numbers of steps. Contrary to the reported large amount of drifting S. horneri along the Japanese coast, the three clades were dividedly distributed on the Japanese coast: the northern Pacific, the central Pacific, and western Japan. The western Japan S. horneri had haplotypes that were phylogenetically closer to those of S. filicinum than to the northern and central Pacific S. horneri populations. The S. filicinum populations were included within the western Japan clade and grouped together with the S. horneri samples from western Japan. Taken together with the unstable morphological diagnosis, this result suggests that S. filicinum should be reduced into a synonymy of S. horneri. The TMRCA analysis suggested that the divergence time of each clade may go back to the last interglacial period and a skyline plot suggested that the last glacial maximum had only a small effect on the population size of S. horneri. The geographic subdivision of the three groups, in spite of a large amount of drifting mats, suggests a limited contribution of drifting mats to gene flow on a large geographic scale. On a small geographic scale, a small number of haplotypes were shared between S. horneri-type and S. filicinum-type populations. This result suggests that populations of these two types are partially, though not completely, isolated from each other, possibly by selfing in S. filicinum-type populations or by a difference in peak reproduction.     

Characterization of i(18p) in prenatal diagnosis by fluorescence in situ hybridization

A case is presented in which chorionic villus direct preparation and cultured chorionic villus cells revealed a 47,XX, + mar karyotype. The marker was a small metacentric chromosome and appeared to be i(18p)—isochromosome 18p. Follow-up studies in both amniotic fluid and fetal fibroblasts confirmed the karyotype. In order to characterize the marker, a panel of biotinylated DNA probes was used, including a whole chromosome 18 probe, chromosome 18-specific alpha satellite DNA, Yac clones, and a pan-telomeric probe. These studies show that the marker is a monocentric i(18p) in which about 80 per cent of chromosome 18 alpha satellite DNA has been lost.     

Chemical stabilization of medical waste fly ash using chelating agent and phosphates: Heavy metals and ecotoxicity evaluation

Chemical stabilization of heavy metals in medical waste fly ash has been carried out using the following compounds: a chelating agent (Ashnite S803), a commercial acidic phosphoric acid solution (Ashnite R303) as well as basic one (Ashnite R201). In order to predict the leachability of heavy metals, Japanese Leaching Test (JLT-13) procedure was applied to the stabilized fly ash products. An ecotoxicity assessment of the stabilized fly ash products leachate and the unstabilized fly ash leachate was conducted using a battery of bioassays based on lettuce root elongation inhibition, Daphnia magna mortality and Vibrio fischeri photoinhibition. The results showed that the three stabilizing agents were able to significantly decrease (ANOVA, P < 0.05) the concentration of heavy metals in the leachates. Although the leachate from both stabilized and unstabilized fly ash were very toxic to lettuce and daphnids, the incorporation of these stabilizing agents diminished significantly (ANOVA, P < 0.05) the toxicity of the leachates towards the three tested organisms. Pearson correlation analysis was used to analyze the strength of the relationship between chemical elements concentration in the leachate and bioassays results. Most of the heavy metals in the leachate were significantly correlated (ANOVA, P < 0.05) with the toxicity values of the bioassays. However, the correlation was not found between the concentration of dissolved organic carbon (DOC) and the toxicity effect of the leachate to the tested organisms.     

Environmental assessment and accounting for the waste disposal stream in Bangkok,Thailand

It is very important that waste should be controlled and appropriately handled in a waste disposal stream, considering its impact on the environment. In this research, the LCA-EA model was applied to the current waste disposal stream of the BMR as well as other waste disposal stream scenarios, so that treatment cost, environmental load and environmental cost were assessed quantatively. The results of this study showed that in the current waste diposal stream in Bangkok, there were large contributions from carbon dioxide and methane to the greenhouse gas emissions from the stream. The study was able to quantify the reductions in environmental load associated with various waste disposal stream scenarios, using the baseline scenario as a standard.     

Public coordination for escaping from technological lock-in: its possibilities and limits in replacing diesel vehicles with compressed natural gas vehicles in Tokyo

This paper analyzes a recent attempt by the Tokyo Metropolitan Government to replace diesel vehicles with low-emission vehicles, particularly, compressed natural gas vehicles. As commonly observed in the transportation sector, when strong complementarities among the components of a complex technological system exist, a failure in coordination results to a state of technological lock-in. In this respect, the public sector can serve a focal role in coordination to promote new technologies. The Tokyo experience illustrates the potentials and limitations in overcoming a state of technological lock-in by effective management of the behaviors and expectations of the relevant actors involved in using, producing, and supporting alternative clean vehicles.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Material properties of water-swelling material used as a water cutoff treatment material at waste landfill sites

Water-swelling material (WSM) is a fluid sealant obtained by blending high-absorbency polymer, a filler, and a solvent by using a synthetic resin elastomer as the base material. In this research, we studied experimentally the composition of WSM, the extent of swelling, the strength of the WSM and the long-term performance of the swelling material used as a jointed water cutoff treatment material at waste landfill sites. One of the results was that adjusting the degree of etherification of the high-absorbency polymer, which is a component of the WSM, and the resin content of the synthetic elastomer contributed to improvement of the swelling of the sealant and the strength of the swelling material. Further, in long-term tests, the strength of the WSM tended to become stabilized and it was confirmed that it had sufficient pressure resistance for use in coastal landfill sites, where its application as a water cutoff treatment material is being considered.     

Resolving complexities in healthcare waste management: a goal programming approach.

The wide variety of activities at healthcare facilities generates different types of waste. There is always a danger of spreading infection due to mishandling of infectious waste or sharps. Hence, a variety of policies and actions have been taken to improve healthcare waste management systems. A large body of literature is available which suggests methods for tackling different problematic situations but management is confronted with a variety of complex problems, such as the choice of technological options to control infection, legal and budget restrictions and the timely removal of waste, which can, at times, conflict with each other. Hence, a planning model is presented that is based on a trans-shipment goal programming approach wherein the waste flow is optimized for multiple objectives under different priority structures or with different relative importance (weights). The use of the model is demonstrated as a decision-making tool that would help the management to understand the effects of their policies on the system performance. The model is validated for a case application representing a real-life situation. It can be easily seen that, in the case in which the management is biased toward a higher level of safety protection towards infection control, they have to compromise on cost control and to some extent on environmental pollution control.