A Sorptive Slurry Bioscrubber for the Control of Acetone

ABSTRACT

A sorptive slurry bioscrubber adds powdered activated carbon (PAC) to a conventional suspended-growth bioscrubber. The activated carbon increases pollutant removal from the gas phase due to adsorption on carbon. The carbon is bioregenerated in the oxidation reactor and recycled to the scrubbing column. A three-stage, conventional bioscrubber was tested with and without carbon. The experiments showed that the PAC improved the removal efficiency of the system and that bioregeneration occurred. At an inlet gas-phase acetone concentration of 50 ppmv, the steady-state removal increased from 88 to 95% when activated carbon was added to the biological slurry.     

Evaluation of a sustainable remediation option: Beneficial reuse of petroleum-contaminated sediment as an energy source

The characteristics of petroleum-contaminated sediment (PCS) have been evaluated to assess whether the practice of its beneficial reuse as a sole or supplemental energy source is sustainable relative to other sediment remediation options such as monitored natural recovery (MNR), capping, or off-site disposal. Some of these remediation options for PCS are energy-intensive and/or require land utilization. The energy and compositional analysis results indicate a low carbon content (15–17%(wt)) and corresponding low energy values of 5,200 kJ/kg (2,200 Btu/lb) to 5,600 kJ/kg (2,400 Btu/lb). However, given other decision-making criteria, the sediment may contain enough value to be added as a supplemental fuel given that it is normally considered a waste product and is readily available.

The thermogravimetric profiles obtained under both combustion and pyrolytic conditions showed that the sulfur contents were comparable to typical low sulfur bituminous or lignite coals found in the United States, and most of the volatiles could be vaporized below 750°C. The heavy metal concentrations determined before and after combustion of the PCS indicated that further engineering controls may be required for mercury, arsenic, and lead. Due to the potential for reduction of public health and environmental threats, potential economic savings, and conservation of natural resources (petroleum and land), removal of PCS by dredging and beneficial reuse as a supplemental fuel clearly has merit to be considered as a sustainable remediation option.

Implications: This study will provide a logical evaluation process to determine whether petroleum-contaminated sediment can be reused as an energy source. The energy and emissions values were determined and evaluated whether the sediment could be combusted for viable and sustainable use, considering several factors pertinent to evaluate in the remediation decision process. Various analysis methods were employed to determine elemental compositions, heating values, thermal and emission characteristics. This evaluation process may be used as a general methodology for the determination of petroleum-contaminated sediment as a supplemental fuel that may have merit to be considered as a sustainable remediation option.     

Model selection and evaluation for risk assessment of dioxin-contaminated sites

The general European population has a total intake of dioxins and dioxin-like chemicals near the limit recommended by the European Union, making additional exposure above background levels undesirable. For populations living near dioxin-contaminated sites, additional exposure may occur by intake of locally produced food, inhalation of particles, dermal contact with soils, or other exposure pathways. Risk assessment tools are required to estimate risks associated with contaminated sites and to set priorities for site remediation. Here, we review several multimedia models that can be applied as tools to support risk assessment. We then present a strategy to select, apply, evaluate, and adapt a model to address a specific situation. The case study we consider is a risk assessment of generic background dioxin exposure in Sweden, and we compare the predictions with environmental observations and exposure data from Sweden. Arguments are presented for selecting the CalTOX model for this case study. We demonstrate the application, evaluation, and adaptation of the model and discuss the requirements for extending the analysis to conduct risk assessment for subpopulations living near dioxin-contaminated sites.     

Speciation of five arsenic species (arsenite, arsenate, MMAAV, DMAAV and AsBet) in different kind of water by HPLC-ICP-MS

A method using Ion Chromatography hyphenated to an Inductively Coupled Plasma-Mass Spectrometer has been developed to accurately determine arsenite (As(III)), arsenate (As(V)), mono-methylarsonic acid (MMAA(V)), dimethylarsinic acid (DMAA(V)) and arsenobetaine (AsBet) in different water matrices. The developed method showed a high sensitivity with detection limits for each arsenic species close to 0.4pg injected. Arsenite and arsenate were the major species found in surface and well waters, but AsBet and DMAA(V) were found in some surface waters, which has never been reported before, while in some natural mineral waters located in volcanic region, the arsenic content exceeded the maximal admissible arsenic content by European legislation standards and the predominant form was As(V).     

Evaluation of in situ steam‐injection processes for reduction of petroleum compounds within an abandoned canal

A conceptual approach of a novel application of in‐situ thermal processes that would either use a steam injection process or a steam/surfactant injection process was considered to remediate petroleum contaminated sediment residing in an abandoned canal. Laboratory tests were conducted in an attempt to volatilize or mobilize contaminants of concern (selected polycyclic aromatic hydrocarbons [PAHs]) from the contaminated sediment into a phase that could be physically removed. The processes were operated above ambient temperature and pressure in an attempt to increase the removal of the contaminants of concern from the sediment. The ability of both the steam injection process and the steam/surfactant process to remove PAHs from the sediment was considered ineffective; as only two of the seventeen selected PAHs (naphthalene and C1 naphthalene) were associated with a percentage mass reduction greater than 34% for both treatments (four trials). The steam/surfactant injection process generally resulted in higher reductions than the steam injection process, but had larger variances within the two trials using the treatment type. This preliminary evaluation suggests that steam‐based injection processes for removing petroleum contamination from this canal sediment, using the surfactants selected, equipment set‐up, and operating conditions studied, would be considered ineffective. © 2010 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Evaluation of non-enteric sources of non-methane volatile organic compound (NMVOC) emissions from dairies

Dairies are believed to be a major source of volatile organic compounds (VOC) in Central California, but few studies have characterized VOC emissions from these facilities. In this work, samples were collected from six sources of VOCs (Silage, Total Mixed Rations, Lagoons, Flushing Lanes, Open Lots and Bedding) at six dairies in Central California during 2006–2007 using emission isolation flux chambers and polished stainless steel canisters. Samples were analyzed by gas chromatography/mass spectrometry and gas chromatography/flame ionization detection. Forty-eight VOCs were identified and quantified in the samples, including alcohols, carbonyls, alkanes and aromatics. Silage and Total Mixed Rations are the dominant sources of VOCs tested, with ethanol as the major VOC present. Emissions from the remaining sources are two to three orders of magnitude smaller, with carbonyls and aromatics as the main components. The data suggest that animal feed rather than animal waste are the main source of non-enteric VOC emissions from dairies.     

Flood vulnerability,risk, and social disadvantage: current and future patterns in the UK

Regional Environmental Change - Present day and future social vulnerability, flood risk, and disadvantage across the UK are explored using the UK Future Flood Explorer. In doing so, new indices of...     

Deconstructing compassionate conservation

Compassionate conservation focuses on 4 tenets: first, do no harm; individuals matter; inclusivity of individual animals; and peaceful coexistence between humans and animals. Recently, compassionate conservation has been promoted as an alternative to conventional conservation philosophy. We believe examples presented by compassionate conservationists are deliberately or arbitrarily chosen to focus on mammals; inherently not compassionate; and offer ineffective conservation solutions. Compassionate conservation arbitrarily focuses on charismatic species, notably large predators and megaherbivores. The philosophy is not compassionate when it leaves invasive predators in the environment to cause harm to vastly more individuals of native species or uses the fear of harm by apex predators to terrorize mesopredators. Hindering the control of exotic species (megafauna, predators) in situ will not improve the conservation condition of the majority of biodiversity. The positions taken by so-called compassionate conservationists on particular species and on conservation actions could be extended to hinder other forms of conservation, including translocations, conservation fencing, and fertility control. Animal welfare is incredibly important to conservation, but ironically compassionate conservation does not offer the best welfare outcomes to animals and is often ineffective in achieving conservation goals. Consequently, compassionate conservation may threaten public and governmental support for conservation because of the limited understanding of conservation problems by the general public.     

A call to action for climate change research on Caribbean dry forests

Regional Environmental Change - Tropical dry forest (TDF) is globally one of the most threatened forest types. In the insular Caribbean, limited land area and high population pressure have resulted...