Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Evaluating the efficiency of green vehicles and diesel vehicles

One of the major interests of governments in the area of environmental protection is to reduce greenhouse gas (GHG) emissions and air pollutants’ emissions (HC, CO, NO_x, PM, and SO_x) from vehicles. This paper aims at evaluating the efficiency of green and diesel vehicles. Two hundred fifty vehicles were selected for comparison study. The results show that the efficiency of each type of vehicle hardly differed in 2008 and 2009, but the gap between green and diesel vehicles became significant in 2010–2012. The results also indicate that larger automotive companies and smaller green vehicles show higher efficiency in recent years, whereas the type of green vehicles and the origin of automotive companies are not significantly related to the efficiency score of green vehicles. These findings provide more information for understanding differences in green vehicles.     

Effects of parabens on apoptosis induced by serum-free medium

Alkyl esters of p-hydroxybenzoic acids (parabens), an endocrine disrupter, are used as preservatives in cosmetics and foods. In this study, to understand the relationship between parabens and differentiation in infants, the effects of parabens on apoptosis induced by serum deprivation in PC12 cells were investigated. In addition, apoptosis-related factors were assayed. As results, a tendency toward enhancement of apoptosis was observed in the cells cultured in the serum-free medium with methylparaben, and this tendency was suggested to be related to the contents of BAD, a pro-apoptotic protein. Butylparaben did not show any tendency to enhance apoptosis.     

One-pot wet ball-milling for waste wire-harness recycling

Journal of Material Cycles and Waste Management - In this study, we developed a one-pot wet ball-milling method for the recovery of highly pure copper wire, poly(vinyl chloride) (PVC) coating, and...     

Probing system for measurement of micro-scale components

The need for quality control of the complex micro-structure has been growing due to increased production of parts with complex 3D micro-scale features. However, wide use of 3D metrology of miniature parts is difficult due to the lack of cost-effective and precise probing system at the micro-scale. This paper introduces a new probing system using a wire-based probe and acoustic emission (AE)-based sensing method. The design of the probing system allows the size of the probe to be varied relatively easily. Repeatability of less than 1 μm has been achieved with the proposed probing system.     

Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates

Polyvinyl chloride (PVC) was milled with hydrated or unhydrated calcium sulfates (CaSO₄·2H₂O or CaSO₄) in air by using a planetary mill to investigate mechanochemical dechlorination behavior. The milling process resulted in size reduction and in the breaking of bonds leading to mechanically induced solid state reaction, forming CaCl₂ and dechlorinated hydrocarbon with C=C double bonds in the product. Washing the milled mixtures with water at room temperature allowed removal of the chloride formed during milling, and more than 95% of the chlorine in PVC was removed from a mixture milled for 4 h. This process could offer a potential route for the handling and disposal of both PVC and gypsum wastes. H₂S gas was generated during milling; more H₂S was released from the unhydrated sample than from the hydrated sample.     

Molecular structure of extracellular poly(3-hydroxybutyrate) depolymerase fromAlcaligenes faecalis T1

The amino acid sequence of a peptide containing an active serine was examined with poly(3-hydroxybutyrate) (PHB) depolymerase ofAlcaligenes faecalis T1. The sequence Cys-Asn-Ala-Trp-Ala-Gly-Ser-Asn-Ala-Gly-Lys was obtained. This amino acid sequence around the active serine does not fit any reported sequence of other esterases and proteases. On the other hand, a segment of the amino acid sequence of PHB depolymerase ofA. faecalis was homologous to the type III sequence of fibronectin. Similar sequences have been reported in some type of bacterial chitinase and cellulases, and PHB depolymerase seems to have an overall similarity to these bacterial extracellular hydrolases.     

Ion chromatographic determination of anions in rainwater

High acidity rainwater has recently become an issue in environmental pollution because of its great influence on ecological systems with special reference to the human environment. To solve this problem, the chemical behaviors of various pollutants in the air, particularly in the wet atmosphere must be studied. Ion chromatography was used for rapid analysis of trace amounts of anions.As a result, it was found that a combination of 2mM Na₂CO₃ and 5mM NaOH as an eluent was suitable for the separation of various anions. The reproducibility of determination of anions in standard solutions was found to be satisfactory with a coefficient of variation (CV) of 2–4% for F^?, Br^?, NO^?₃, SO^2?₃, SO^2?₄, and PO^3?₄, but not for NO^?₂. The determination of NO^?₂ was accomplished by preparing an eluent having almost the same composition and cencentration as that of the standard and sample solutions. The precision of the method with rainwater samples was less than 10%, and was considered to be usable for data analysis.In addition, a considerable number of ions in rainwater samples could be determined by using 1–3 ml of the sample without pretreatment. It was found that ion chromatography was one of the best means to obtain information on the chemical behaviors of trace amounts of anions in rainwater.