Recovery of benzene-rich oil from the degradation of metal- and metal oxide-containing poly(ethylene terephthalate) composites

Pure poly(ethylene terephthalate) (PET) resin and metal-/metal oxide-containing PET composites were thermally decomposed in the presence of Ca(OH)₂ using a tube reactor. The effects of batch and continuous processing, the presence of Ca(OH)₂, and PET size on benzene production were investigated. A maximum benzene yield and purity of 82.9 % and 78.8 wt%, respectively, were obtained at 700 °C in the presence of Ca(OH)₂ when using small PET particles; further, a continuous feed reactor was favored over a batch reactor. Effective contact between PET and Ca(OH)₂ was important in the PET degradation, which promoted hydrolysis of PET and decarboxylation of terephthalic acid, whereas pyrolysis was suppressed. Furthermore, the results of thermal decomposition of PET-based waste—PET-based X-ray films, magnetic tape, and prepaid cards—indicated that the metal and metal oxides contained in the waste had no significant catalytic effect on PET degradation or on the recovery of benzene-rich oil in the presence of Ca(OH)₂.     

Dechlorination of polyvinyl chloride in NaOH/ethylene glycol solution by microwave heating

This study investigated the dehydrochlorination of flexible polyvinyl chloride (PVC) containing 59.2% PVC, 29.7% dioctyl phthalate (DOP), and approximately 12% stabilizers. Flexible PVC was treated with NaOH/ethylene glycol (NaOH/EG) solutions at NaOH concentrations in the range 0.5–4 mol/l and was heated in a microwave heater at a temperature between 100° and 160°C for 0–30 min. All chlorides were completely eliminated by internal heating at 160°C using microwaves for 10 min in a 1 mol/l NaOH/EG solution, and the residue was made up of hydrocarbons. The weight loss rate reached a maximum of 74.7% at a temperature of 160°C. It was discovered that the use of microwaves significantly shortened the reaction time compared to using conventional electric heaters or other external heating systems and also allowed the use of lower concentrations of NaOH. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Solubility parameters for determining optimal solvents for separating PVC from PVC-coated PET fibers

Poly(vinyl chloride) (PVC) in PVC-coated poly(ethylene terephthalate) (PET) fabrics can be separated through dissolution in a suitable solvent, leaving only the PET fibers. We investigated the solubility of PVC in 30 solvents using swelling tests. The results were compared with those obtained using the Hansen, Gutmann, Swain, E _T(30), and Kamlet–Taft parameters. For this purpose, Gaussian plots of the PVC swellability versus solubility parameter were used to decide the applicability of the solubility parameter system. Only Gutmann’s electron acceptor–donor parameter (AN + DN) and the Kamlet–Taft parameters β and π* could describe the PVC-solvent system satisfactorily. Tetrahydrofuran (THF), methyl ethyl ketone (MEK), N,N-dimethylformamide (DMF), cyclohexanone, and cyclopentanone were tested for separating PVC from PET at different temperatures. THF dissolved PVC at 20 °C, while cyclohexanone and cyclopentanone did so at 40 °C. Traces of PVC remained on the PET fibers when DMF was used. Complete dissolution of PVC was not achieved at any temperature with MEK. The present work shows that solubility parameters are a helpful tool for the search for suitable solvents. It shows also that solubility parameters have to be selected carefully, since their usefulness depends strongly on the polymer properties.     

Upgrading of poly(vinyl chloride) by chemical modifications using sodium sulfide

The recycling of poly(vinyl chloride) (PVC) is one of the most important issues in the treatment of waste plastics. To improve PVC recycling, it is necessary to develop new recycling techniques, including new techniques for the dechlorination of chlorine-containing polymers. It has been established that wet dechlorination of PVC in NaOH/ethylene glycol solution is more effective than dry dechlorination. In this study, the wet process was used, and the chemical modification of PVC by nucleophilic substitution was considered for upgrading waste PVC. Chlorine was substituted in solution by several nucleophilic reagents, thus changing the properties of PVC. The reaction of PVC in Na2S/ethylene glycol solution at 170°C resulted in the formation of a mixture comprising 32% elimination and 26% substitution products. The scanning electron microscopy/energy dispersive X-ray spectroscopy mappings and elementary analysis of PVC indicated that this chlorine-substitution process led to cross-linking by sulfur.     

Efficient dehalogenation of automobile shredder residue in NaOH/ethylene glycol using a ball mill

We investigated the effectiveness of sodium hydroxide/ethylene glycol (NaOH/EG) for dehalogenation of automobile shredder residue (ASR) using a ball mill. Efficient dehalogenation was achieved at atmospheric pressure by combining the use of EG (196 degrees C b.p.) as a replacement solvent for NaOH with ball milling, which improved contact between ASR and OH(-) in solution. Moderate NaOH concentrations and increased ball mill rotation speeds produced high dechlorination that was not significantly affected by the weight ratio of ASR to EG. NaOH/EG dechlorination increased with temperature with an apparent activation energy of 50 kJ mol(-1) confirming that the reaction proceeded under chemical reaction control. The modified shrinking-core model was appropriate to explain the dechlorination process. Low chloro levels in our NaOH/EG-treated ASR suggested that this material could be used for feedstock recycling and the wet process may be applicable for dehalogenation of other important waste streams.     

Mobilization of arsenic in groundwater of Bangladesh: evidence from an incubation study

The extensive extraction of arsenic (As)-contaminated groundwaters for drinking, household and agricultural purposes represents a serious health concern in many districts of Bangladesh. This laboratory-based incubation study investigated the sources and mechanisms of As mobilization in these groundwaters. Several incubation studies were carried out using sediments collected from the Bangladesh aquifer that were supplemented, or not, with different nutrients, followed by an analysis of the sediment suspensions for pH, ORP (oxidation-reduction potential), EC (electrical conductivity) and As and Fe(ΙΙ) concentrations. In the substrate-amended sediment suspensions incubated under anaerobic environment, there was a mobilization of As (maximum: 50–67 μg/l) and Fe(ΙΙ) (maximum: 182 μg/l), while the ORP value decreased immediately and drastically (as much as −468 mV to −560 mV) within 5–6 days. In the sediment suspensions incubated under control and aerobic conditions, no significant As mobilization occurred. The simultaneous mobilization of As and Fe(ΙΙ) from sediments is a strong indication that their mobilization resulted from the reduction of Fe oxyhydroxide by the enhanced activity of indigenous bacteria present in the sediments; this phenomenon also provides insights on the mobilization mechanism of As in groundwater. The concentrations of As in the sediments used in the incubation studies were strongly linked to the gradients of redox potential development that was stimulated by the quantity of organic nutrient (glucose) used. The penetration of surface-derived organic matter into the shallow aquifer may stimulate the activity of microbial communities, thereby leading to a reduction of iron oxyhydroxide and As release.     

Spawning periodicities coinciding with semidiurnal tidal rhythms in the chiton Acanthopleura japonica

Spawning of the chiton Acanthopleura japonica was examined in 1983 and 1984, by means of consecutive sampling of newly spawned eggs from Tanabe Bay, Japan. Abundant collection of the eggs was recorded just before the high tide peaks on the days around spring tide, predominantly in the morning, for 7 to 9d, and subordinately in the afternnon for 3 to 4d. Water temperature has no effect on spawning time.     

Feedstock recycling of waste polymeric material

The first International Symposium on Feedstock Recycling of Polymeric Materials (ISFR) was hosted in 1999 in Sendai, Japan. Since then, the ISFR has been held five times in different places in Asia and Europe. Each of these conferences focused on special issues covered by the Journal of Material Cycles and Waste Management. The topics included thermal processes with and without catalysts, wet processes in various solvents, the dehydrochlorination of PVC, mechanical recycling and separation techniques, as well as the treatment of biomaterials. This review is a compilation of the most interesting and important developments discussed at the ISFR during the last decade.