Understanding productivity declines of resource accumulation in the prefectures of Japan

Environmental Economics and Policy Studies - This study employs a data envelopment analysis (DEA) framework using long-term panel data of the physical stocks of buildings and infrastructure...     

Recovery of benzene-rich oil from the degradation of metal- and metal oxide-containing poly(ethylene terephthalate) composites

Pure poly(ethylene terephthalate) (PET) resin and metal-/metal oxide-containing PET composites were thermally decomposed in the presence of Ca(OH)₂ using a tube reactor. The effects of batch and continuous processing, the presence of Ca(OH)₂, and PET size on benzene production were investigated. A maximum benzene yield and purity of 82.9 % and 78.8 wt%, respectively, were obtained at 700 °C in the presence of Ca(OH)₂ when using small PET particles; further, a continuous feed reactor was favored over a batch reactor. Effective contact between PET and Ca(OH)₂ was important in the PET degradation, which promoted hydrolysis of PET and decarboxylation of terephthalic acid, whereas pyrolysis was suppressed. Furthermore, the results of thermal decomposition of PET-based waste—PET-based X-ray films, magnetic tape, and prepaid cards—indicated that the metal and metal oxides contained in the waste had no significant catalytic effect on PET degradation or on the recovery of benzene-rich oil in the presence of Ca(OH)₂.     

Crystallization Behavior and Dynamic Mechanical Properties of Poly(l-Lactic Acid) with Poly(Ethylene Glycol) Terminated by Benzoate

Effect of the addition of poly(ethylene glycol) terminated by benzoate (PEG-BA) on the crystallization behavior and dynamic mechanical properties of poly(l-lactic acid) PLLA is studied as compared with poly(ethylene glycol) (PEG-OH). It is found that PEG-BA is miscible with PLLA and shows good plasticizing effect. Because PEG-OH having the same degree of polymerization is immiscible with PLLA, the end group in PEG-BA, i.e., benzoate, plays an important role in the miscibility. Furthermore, PEG-BA does not induce the PLLA degradation at melt-processing, whereas PEG-OH leads to the hydrolysis degradation. Finally, the addition of PEG-BA pronounces the crystallization rate of PLLA at low crystallization temperatures and thus enhances the degree of crystallinity at conventional processing. Consequently, the temperature dependence of dynamic mechanical properties are similar to that for isotactic polypropylene.     

Liquefaction process for a hydrothermally treated waste mixture containing plastics

Most landfilled plastic waste is a mixture or is in the form of composites with incombustible wastes such as glass, metals, and ceramics. After hydrothermal treatment, including a steam-explosion process, the separation of mixed waste (MW) into organic and inorganic substances becomes easy. However, the effect of hydrothermal pretreatment on the subsequent liquefaction of organic substances from MW is not obvious. In this study, the effects on the liquefaction of polystyrene and high-density polyethylene are discussed. Moreover, optimum conditions for the liquefaction of organic substances from hydrothermally treated MW are identified. By means of this hydrothermal pretreatment, including the steam-explosion process, polystyrene and high-density polyethylene can be significantly converted to oil by liquefaction at 300°–400°C. In comparison with liquefaction of hydrothermally pretreated mixed waste (HMW) at 300°–400°C with a batch type reactor, the yield of oil increases significantly on liquefaction using a semi-batch type reactor. It is considered that the radical chain and termination reactions among the radicals from HMW were inhibited in the semi-batch type reactor. On liquefaction of HMW in a semi-batch reactor, the conversion of HMW to oil was enhanced on increasing the liquefaction temperature to 350°C and the holding time to 60 min. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Divergence of the sustaining and marginalizing communities in the process of rural aging: a case study of Yurihonjo-shi, Akita, Japan

This study examines the marginalization process of rural communities, which is caused by the decline of community-based autonomy and various activities in relation to the decline and aging of their populations, based on the frameworks that describe the process in three stages. A field survey was conducted in five rural communities in Yurihonjo-shi in Akita Prefecture, Japan. These communities were selected based on their locations, population decline and aging rates, and population sizes and were categorized into two groups, the remote and the central communities. This survey was composed of two sections: (1) a questionnaire-based survey to households and (2) an interview survey with the chairperson of each community. In order to capture the multidimensionality of residents’ daily lives, sustainable development indicators, which are originally designed to capture the well-being of nations, were utilized to develop the questionnaire. The results demonstrated significant differences between the two groups of communities mainly on four aspects: (1) farming type, (2) visits and roles of out-migrated family, (3) self-evaluation of living conditions, and (4) residents’ future concerns. These findings suggest the current state of the remote community can be seen as that of the “marginalizing” community, for which a welfare-based approach is recommended to secure the living conditions of the residents. On the other hand, the current state of the central community is considered as that of the “sustaining” community for which a revitalization approach is recommended in order to rejuvenate the diminishing community functions.     

Air pollution and young children's inhalation exposure to organophosphorus pesticide in an agricultural community in Japan

Assessment of airborne organophosphorus pesticides in houses of young children (1-6 years old) and childcare facilities was conducted following pesticide applications in an agricultural community in Japan. Trichlorfon and fenitrothion, applied in two separate periods, were frequently detected from outdoor and indoor air. Dichlorvos, the primary degradation product of trichlorfon, was also detected after the application of trichlorfon. Both the outdoors and indoor concentration of applied pesticide were shown to increase with decreasing distance from the pesticide-applied farm. Indoor concentration of these pesticides significantly correlated with outdoor concentration (p=0.001 for trichlorfon and p=0.001 for fenitrothion), indicating infiltration of applied pesticide inside. Ratio of indoor to outdoor concentration (I/O ratio) of fenitrothion was higher for houses with windows open during the application than those with closed windows (median value: 0.74 vs. 0.16, p=0.003). However, a similar trend was not observed for trichlorfon as well as dichlorvos in the first period. Dichlorvos was found to have a higher I/O ratio than trichlorfon during the period, and clear correlation between indoor concentrations of dichlorvos and those of trichlorfon suggested increased decomposition of trichlorfon in the indoor environment. Daily inhalation exposure estimated by using the fixed measurement data and time-activity questionnaire ranged from 0 to 35 ng/kg/day for trichlorfon, from 0 to 26 ng/kg/day for dichlorvos, and from 0 to 44 ng/kg/day for fenitrothion. Median inhalation exposure from indoor air accounted for 74%, 86.3%, and 45% of the daily inhalation exposure, respectively. For kindergarteners or nursery school children, inhalation exposure at childcare facilities was comparable with or more than that at home, indicating that pollution level at childcare facilities had potential of high impact on children's exposure. Estimated daily inhalation exposures were inversely correlated to the proximity of their activity location to the pesticide-applied farm.     

Formation of mutagens by photolysis of amino acids in neutral aqueous solution containing nitrite or nitrate ion

Nine amino acids, i.e., alanine, threonine, cysteine, glutamic acid, arginine, proline, tryptophan, phenylalanine and tyrosine, were irradiated with UV light in water containing nitrite or nitrate ion under neutral conditions. The mutagenicities of the ether extracts and the residual water layers of the reaction mixtures were assayed with and without S-9 mix using $\text{Salmonella typhimurium}$ TA98 and TA100. Three aromatic amino acids, tryptophan, phenylalanine and tyrosine, were found to give direct-acting and frameshift mutagens by irradiation in aqueous nitrite solution. Among them, the ether extract of tryptophan exhibited the strongest mutagenicity toward TA98. In the case of irradiation in aqueous nitrate solution, only the ether extract of tryptophan exhibited weak mutagenicity toward TA98 without S-9 mix. The effects of nitrite concentration, irradiation time and pH on mutagen formation from tryptophan and some characteristics of the produced mutagens were examined.     

A study on emission of phthalate esters from plastic materials using a passive flux sampler

Phthalate esters are used as plasticizer in many plastics, and several studies have shown their toxicity. Phthalate esters are gradually emitted over time, and so it is conceivable that they pose a significant health risk. This study aims to investigate the temperature dependence of the emissions of various phthalate esters and to estimate the health risks of these emissions at various temperatures. A passive-type sampler was developed to measure the flux of phthalate esters from the surface of plastic materials. With this sampler, we examined three widely used plastic materials: synthetic leather, wallpaper and vinyl flooring. The observed maximum emissions of diethyl phthalate, dibutyl phthalate, and diethylhexyl phthalate (DEHP) from these materials at 20°C were 0.89, 0.77, and 14 μg m⁻² h⁻¹, respectively. Emissions at 80°C were 2.8, 4.5×10², and 1.5×10³ μg m⁻² h⁻¹, respectively. The results showed this temperature dependence is determined primarily by the type of phthalate ester and less so by the type of material. The estimation from the results of temperature dependence indicated the concentration of DEHP in a vehicle left out in the sunshine during the day can exceed the recommended levels of Japan Ministry of Health, Labour and Welfare.