Toxic cyanobacteria and microcystin dynamics in a tropical reservoir: assessing the influence of environmental variables

Environmental Science and Pollution Research - Toxic cyanobacterial blooms (TCBs) have become a growing concern worldwide. The present study investigated the dynamic of toxic cyanobacteria and...     

Neighborhood influences on the diffusion of residential photovoltaic systems in Kyoto City,Japan

Environmental Economics and Policy Studies - This study investigates the factors influencing the diffusion of residential photovoltaic systems. Factors examined are related to social attributes,...     

Current state of yusho and prospects for therapeutic strategies

The mass food poisoning incident yusho occurred in Japan in 1968. It was caused by the ingestion of rice bran oil contaminated with polychlorinated biphenyls and various dioxins and dioxin-like compounds including polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDFs). Notably, PCDFs were found to contribute to approximately 65% of the total toxicity equivalent in the blood of yusho patients. Lipophilic dioxins are retained in the body for a longer period than previously estimated. Victims suffered from characteristic skin manifestations associated with non-specific systemic symptoms, neurological symptoms, and respiratory symptoms. The severe symptoms seen in the initial phase subsequently faded, but recently, improvements have scarcely been observed. The Yusho Group has been researching treatments for this condition. Several clinical trials with chelating agents or dietary fibers aimed at accelerating the excretion of compounds. While some treatments increased dioxin excretion, none provided satisfactory symptom relief. Concurrently, various phytochemicals and herbal extracts have been found to possess biological activities that suppress dioxin-induced toxicity via aryl hydrocarbon receptor or activate the antioxidant nuclear factor-erythroid 2-related factor-2 (NRF2) signal pathway, making them promising therapeutic candidates. Here, we summarize the current status of yusho and findings of clinical trials for yusho patients and discuss the treatment prospects.

     

Biodegradation of heptachlor and heptachlor epoxide-contaminated soils by white-rot fungal inocula

The ability of certain white-rot fungi (WRF) inocula to transform heptachlor and heptachlor epoxide and its application in artificially contaminated soil were investigated. Fungal inoculum of Pleurotus ostreatus eliminated approximately 89 % of heptachlor after 28 days of incubation, and chlordene was detected as the primary metabolite. The fungal inoculum of Pleurotus ostreatus had the highest ability to degrade heptachlor epoxide; approximately 32 % were degraded after 28 days of incubation, and heptachlor diol was detected as the metabolite product. Because Pleurotus ostreatus transformed heptachlor into a less toxic metabolite and could also effectively degrade heptachlor epoxide, it was then selected to be applied to artificially contaminated soil. The spent mushroom waste (SMW) of Pleurotus ostreatus degraded heptachlor and heptachlor epoxide by approximately 91 and 26 %, respectively, over 28 days. This finding indicated that Pleurotus ostreatus SMW could be used to bioremediate heptachlor- and heptachlor epoxide-contaminated environments.     

Liquefaction process for a hydrothermally treated waste mixture containing plastics

Most landfilled plastic waste is a mixture or is in the form of composites with incombustible wastes such as glass, metals, and ceramics. After hydrothermal treatment, including a steam-explosion process, the separation of mixed waste (MW) into organic and inorganic substances becomes easy. However, the effect of hydrothermal pretreatment on the subsequent liquefaction of organic substances from MW is not obvious. In this study, the effects on the liquefaction of polystyrene and high-density polyethylene are discussed. Moreover, optimum conditions for the liquefaction of organic substances from hydrothermally treated MW are identified. By means of this hydrothermal pretreatment, including the steam-explosion process, polystyrene and high-density polyethylene can be significantly converted to oil by liquefaction at 300°–400°C. In comparison with liquefaction of hydrothermally pretreated mixed waste (HMW) at 300°–400°C with a batch type reactor, the yield of oil increases significantly on liquefaction using a semi-batch type reactor. It is considered that the radical chain and termination reactions among the radicals from HMW were inhibited in the semi-batch type reactor. On liquefaction of HMW in a semi-batch reactor, the conversion of HMW to oil was enhanced on increasing the liquefaction temperature to 350°C and the holding time to 60 min. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Identification of the dimethylbenzyl mercapturic acid in urine of rats treated with 1,2,3-trimethylbenzene.

The structure was investigated of the mercapturic acid excreted in urine of rats after the i.p. administration of 1,2,3-trimethylbenzene. Of the two regioisomeric mercapturic acids, i.e. N-acetyl-S-(2,3-dimethylbenzyl)-L-cysteine and N-acetyl-S-(2,6-dimethyl-benzyl)-L-cysteine, only the former was isolated by preparative HPLC and identified, by comparison with an authentic specimen. The excretion rate of the mercapturate was estimated to be approximately 5% of dose, not a substantial metabolic route.     

Oyster Contamination with Human Noroviruses Impacted by Urban Drainage and Seasonal Flooding in Vietnam

This study investigated the level of norovirus contamination in oysters collected at a lagoon receiving urban drainage from Hue City for 17 months (August 2015–December 2016). We also investigated the genetic diversity of norovirus GI and GII in oyster and wastewater samples by using pyrosequencing to evaluate the effect of urban drainage on norovirus contamination of oysters. A total of 34 oyster samples were collected at two sampling sites (stations A and B) in a lagoon. Norovirus GI was more frequently detected than GII (positive rate 79 vs. 41%). Maximum concentrations of GI and GII were 2.4 × 10⁵ and 2.3 × 10⁴ copies/g, respectively. Co-contamination with GI and GII was observed in 35% of samples. Norovirus GII concentration was higher at station A in the flood season than in the dry season (P = 0.04, Wilcoxon signed-rank test). Six genotypes (GI.2, GI.3, GI.5, GII.2, GII.3, and GII.4) were identified in both wastewater and oyster samples, and genetically similar or identical sequences were obtained from the two types of samples. These observations suggest that urban drainage and seasonal flooding contribute to norovirus contamination of oysters in the study area.     

Microcystin accumulation and biochemical responses in the edible clam Corbiculaleana P. exposed to cyanobacterial crude extract

We investigated the accumulation and effects of cyanobacterial crude extract(CCE)containing microcystins(MCs) on the edible clam Corbicula leana P. Toxic effects were evaluated through the activity of antioxidant and detoxification enzymes: catalase(CAT),superoxide dismutase(SOD), and glutathione-S-transferases(GSTs) from gills, foot, mantle and remaining soft tissues. Clams were exposed to CCE containing 400 μg MC-LReq/L for10 days and were then kept in toxin-free water for 5 days. Clam accumulated MCs(up to 3.41 ± 0.63 μg/g dry weight(DW) of unbound MC and 0.31 ± 0.013 μg/g DW of covalently bound MC). Detoxification and antioxidant enzymes in different organs responded differently to CCE during the experiment. The activity of SOD, CAT, and GST in the gills and mantle increased in MC-treated clams. In contrast, CAT and GST activity was significantly inhibited in the foot and mostly only slightly changed in the remaining tissues. The responses of biotransformation, antioxidant enzyme activity to CCE and the fast elimination of MCs during depuration help to explain how the clam can survive for long periods(over a week) during the decay of toxic cyanobacterial blooms in nature.     

Chemical and mineralogical evaluation of slag products derived from the pyrolysis/melting treatment of MSW

This paper provides the results of studies on the characteristics of novel material derived from pyrolysis/melting treatment of municipal solid waste in Japan. Slag products from pyrolysis/melting plants were sampled for the purpose of detailed phase analysis and characterization of heavy metal-containing phases using optical microscopy, electron probe microanalysis (EPMA), XRF and XRD. The study revealed that the slag material contains glass (over 95%), oxide and silicate minerals (spinel, melilite, pseudowollastonite), as well as individual metallic inclusions as the major constituents. A distinct chemical diversity was discovered in the interstitial glass in terms of silica content defined as low and high silica glass end members. Elevated concentrations of Zn, Cr, Cu, Pb and Ba were recorded in the bulk composition. Cu, Pb and Ba behave as incompatible elements since they have been markedly characterized as part of polymetallic alloys and insignificantly sulfides in the form of spherical metallic inclusions associated with tracer amounts of other elements such as Sb, Sn, Ni, Zn, Al, P and Si. In contrast, an appreciable amount of Zn is retained by zinc-rich end members of spinel and partially by melilite and silica glass. Chromium exhibits similar behavior, and is considerably held by Cr-rich spinel. The intense incorporation of Zn and Cr into spinel indicates the very effective enrichment of these two elements into phases more environmentally resistant than glass. There was no evidence, however, that Cu and Pb enter into the structure of the crystalline silicates or oxides that may lead to their easier leachability upon exposure to the environment.     

Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.