The assessment of the malignant mesothelioma cases and environmental asbestos exposure in Sivas province, Turkey

One of the most significant diseases related to environmental asbestos exposure is malignant mesothelioma (MM). Sivas province is located in the Central Anatolia where asbestos exposure is common. We aimed to study clinical, demographical and epidemiologic features of the patients with MM in Sivas, along with the history of asbestos exposure. In total, 219 patients with MM who were diagnosed in our hospital between 1993 and 2010 were retrospectively analyzed in terms of demographical and clinical features. Rock, soil and house plaster samples were taken from the habitats of those patients and were evaluated with optical microscopy and X-ray diffraction methods. The age of the patients ranged between 18 and 85 years. The male-to-female ratio was 1.4:1. Most of the patients confirmed an asbestos exposure history. The most frequent symptoms of the patients were chest pain (60 %) and dyspnea (50 %). The gap between the start of first symptoms and the diagnosis date was approximately 4 months in average. The plaster materials used in most of the houses were made up of mainly carbonate and silicate minerals and some chrysotile. Ophiolitic units contained fibrous minerals such as serpentine (clino + orthochrysotile) chiefly and pectolite, brucite, hydrotalcite and tremolite/actinolite in smaller amounts. MM is not primarily related to occupational asbestos exposure in our region, and hence, environmental asbestos exposure may be indicted. Yet, single or combined roles and/or interactions of other fibrous and non-fibrous minerals in the etiology of MM are not yet fully understood and remain to be investigated.     

Synthesis of Ion-Imprinted Alginate Based Beads: Selective Adsorption Behavior of Nickel (II) Ions

Ni(II) imprinted and non-imprinted bioadsorbent alginate beads were prepared, and utilized in the selective adsorption of Ni(II) ions. The optimum adsorption capacity were 6.00 mmol g^?1 at 500 ppm initial metal ion concentration at pH 7 for Ni(II) imprinted alginate beads (IIP). The equilibrium data were applied to Langmuir and Freundlich adsorption isotherms, and it fitted both isotherm models. Thermodynamic parameters showed favorable and endothermic nature of adsorption. Ni(II) imprinted bead showed the strong ability to selective adsorption from Cu(II), Co(II) and Zn(II) ions. In conclusion, Ni(II) ion imprinted alginate beads could be used repeatedly without any significant reduce of adsorption capacity.     

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation

In this study, PM₁₀ concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM₁₀ concentration measured in the winter season was 86.4 and 27.3 μg/m³, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 μg/m³ in the summer season. According to the results, it was observed that the PM₁₀ levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.     

Extracting urban impervious surfaces from Sentinel-2 and Landsat-8 satellite data for urban planning and environmental management

Environmental Science and Pollution Research - Impervious surface is mainly defined as any surface which water cannot infiltrate the soil. Due to the impact of urban impervious surfaces (UIS) on...     

Spatial Distribution Patterns,Sources of Heavy Metals,and Relation to Ecological Risk of Surface Sediments of the Cyprus Northern Shelf (Eastern Mediterranean)

In this study, the spatial distribution of metals and the sources of metal pollution were investigated along the Northern Shelf of Cyprus (Mediterranean Sea). The concentrations of heavy metals and organic matter were measured in sediments collected from the Gemi Konagi, Girne, and Gazi Magusa areas. Measured metal values were compared with Mediterranean background concentrations. Cu and Zn concentrations at the Gemi Konagi area and all of the Cr values were higher than Mediterranean backgrounds. The metal levels were evaluated by the enrichment factor (EF), contamination factor (C_f) and degree of contamination (C_d). EF results indicated that heavy metal sources were probably originated from natural processes and mining activities. The C_f values of Hg indicated low contamination. The C_d (degree of contamination) values for all heavy metals also showed a low degree of contamination at the study area. Metal levels were also compared with the numerical Sediment Quality Guidelines (SQG) for an environmental risk assessment. Results showed that sediments were classified as heavily polluted by Cu and moderately polluted by Zn at Gemi Konagi and heavily polluted by Cr and Ni contamination at all sampling areas per the SQG.     

Evaluation of different wastewater treatment techniques in three WWTPs in Istanbul for the removal of selected EDCs in liquid phase

Endocrine-disrupting compounds (EDCs) are exogenous substances that cause adverse health effects in an intact organism, or its progeny, subsequent to the changes in endocrine function. Recent studies have shown that wastewater treatment plant effluents play an important role in the release of EDCs into aquatic environments. Therefore, in this study, influent and effluent samples from three different wastewater treatment plants (WWTPs) in Istanbul were analysed for the presence of the principal EDCs. These chemicals include steroids and synthetic organic chemicals. Thus, the occurrence and fate of EDCs of great health concern were monitored at three WWTPs in Istanbul. Furthermore, these WWTPs are employing different treatment processes. Therefore, the EDC removal performances of different treatment regimes were also evaluated. Phytosterol was the most abundant EDC in the influent samples. Second group of compounds at high influent levels were alkyl phenols. Pesticide levels of all three WWTP influent samples were low. Pasakoy Advanced WWTP is more effective at eliminating EDCs. Kadikoy Primary WWTP exhibits the lowest EDC elimination efficiencies. To the best of our knowledge, this work comprises the first detailed report on the occurrence and behaviour of both natural and synthetic EDCs in WWTPs of Istanbul and Turkey. The steroid estrogen levels of this study are higher than the previously documented values, except the levels given for Gaobeidian WWTP in Beijing, China. This is attributed to higher population densities of Beijing and Istanbul and as well as to lower individual water consumption rates in the two cities.     

Use of glazed ceramic waste as additive in mortar and the mathematical modelling of its strength

This study investigated the reusability of waste material from the tile manufacturing industry as an alternative material to natural pozzolan trass. Yield strength values of mortar made from Portland cement (CEM 142.5), were measured by adding glazed ceramic waste and trass at various weight ratios (5 to 40%). The test results proved that the strength values at 2, 7, and 28 days gave good results for concentrations of waste materials less than 5-10% in the cement. A decrease in strength was observed at higher concentrations. Mathematical modelling results showed a logarithmic correlation between the mortar strength and weight fraction of cement.     

A Study of the Photocatalytic Oxidation of Humic Acid on Anatase and Mixed-phase Anatase–Rutile TiO2 Nanoparticles

In this study, slurry photocatalytic oxidation process was investigated for natural organic matter removal from aqueous humic acid solutions by using different titanium dioxide (TiO₂) under UV-A irradiation. Bench scale experimental studies were conducted at different humic acid concentration at the range of 10–50 mg/L and different pH. Anatase and mixed-phase anatase–rutile TiO₂ nano particles used in the photocatalytic reactor. The results were evaluated in terms of the parameters that are specific to organic matter content such as dissolved organic carbon concentration, ultraviolet absorbance at 254 nm (UV₂₅₄), specific ultaviolet absorbance at 254 nm, and color (VIS₄₀₀). It was observed that increasing humic acid concentration decreases photocatalytic degradation efficiency. The reactivity of the mixed-phase anatase–rutile (Degussa P-25) TiO₂ was greater than individual anatase particles and the highest efficiency was observed at pH 3 for anatase TiO₂.