The value of virtual conferencing for ecology and conservation

The objectives of conservation science and dissemination of its research create a paradox: Conservation is about preserving the environment, yet scientists spread this message at conferences with heavy carbon footprints. Ecology and conservation science depend on global knowledge exchange—getting the best science to the places it is most needed. However, conference attendance from developed countries typically outweighs that from developing countries that are biodiversity and conservation hotspots. If any branch of science should be trying to maximize participation while minimizing carbon emissions, it is conservation. Virtual conferencing is common in other disciplines, such as education and humanities, but it is surprisingly underused in ecology and conservation. Adopting virtual conferencing entails a number of challenges, including logistics and unified acceptance, which we argue can be overcome through planning and technology. We examined 4 conference models: a pure‐virtual model and 3 hybrid hub‐and‐node models, where hubs stream content to local nodes. These models collectively aim to mitigate the logistical and administrative challenges of global knowledge transfer. Embracing virtual conferencing addresses 2 essential prerequisites of modern conferences: lowering carbon emissions and increasing accessibility for remote, time‐ and resource‐poor researchers, particularly those from developing countries.     

Human impact on wild firewood species in the Rural Andes community of Apillapampa, Bolivia

Firewood is the basic fuel source in rural Bolivia. A study was conducted in an Andean village of subsistence farmers to investigate human impact on wild firewood species. A total of 114 different fuel species was inventoried during fieldtrips and transect sampling. Specific data on abundance and growth height of wild firewood species were collected in thirty-six transects of 50 ×2 m². Information on fuel uses of plants was obtained from 13 local Quechua key participants. To appraise the impact of fuel harvest, the extraction impact value (EIV) index was developed. This index takes into account local participants?? appreciation of (1) decreasing plant abundance; (2) regeneration capacity of plants; (3) impact of root harvesting; and (4) quality of firewood. Results suggest that several (sub-)woody plant species are negatively affected by firewood harvesting. We found that anthropogenic pressure, expressed as EIV, covaried with density of firewood species, which could entail higher human pressure on more abundant and/or more accessible species. The apparent negative impact of anthropogenic pressure on populations of wild fuel species is corroborated by our finding that, in addition to altitude, several anthropogenic variables (i.e. site accessibility, cultivation of exotics and burning practices) explain part of the variation in height of firewood species in the surroundings of Apillapampa.     

International Environmental Agreements: Design of Optimal Transfers Under Heterogeneity

International environmental agreements (IEAs) can coordinate abatement of transboundary pollutants. This paper investigates how heterogeneous countries facing a stock pollutant might structure such an agreement. In particular, we examine how an IEA might be implemented with a set of monetary transfers. The focus is on transfers that are time invariant, linear in emissions, and consistent with budget balance. There is a range of such schemes that would induce efficient emissions. We provide a simple and intuitive characterization of these penalties and describe how specific proposals might be chosen in order to facilitate compliance and implementation. Our proposals are illustrated with a simple example. We show that heterogeneity reduces the scope for penalty schemes to jointly satisfy desirable properties.     

Quantitative evaluation of the chilled-ammonia process for CO2 capture using thermodynamic analysis and process simulation

There is strong world-wide interest in developing new and improved processes for post-combustion capture of CO₂, often using chemical absorption. Developers of new processes make positive claims for their proposals in terms of low energy consumption, but these are usually difficult to validate. This paper demonstrates that rigorous application of thermodynamic analysis and process simulation provides a powerful way to quantitatively estimate the energy requirements of CO₂-capture processes by applying the methodology to the analysis and evaluation of the chilled-ammonia process.     

Performance of newly implemented Environmental Management Systems in primary schools in South Africa

Quantitative results from Environmental Management Systems (EMS) at primary schools have rarely been examined in literature. This paper presents the monitoring results of environmental care in 39 primary schools in Northern South Africa. During 2 years, after the EMS was implemented in the curriculum and in the school's management, the progress of environmental performances of the participating schools has been measured, by means of detailed questionnaires, related to four environmental aspects: water, waste, energy and greening. At the beginning of the project, 50% of the schools performed well on water-related environmental actions. Two years later it was 76%. For waste-related activities the improvement was even stronger: from 50% to 100%. The environmental performances of the schools improved also for greening-related actions, from 50% at the start of the project to 64% two years later. Only energy-related activities did not improve significantly with only 24% of all schools performing well at the end of the survey period.In general, the introduction of an EMS succeeded in an improvement of the overall environmental performances of the schools, but cost-intensive activities were less successful than others.     

Carbon Monoxide Exposures Inside an Automobile Traveling on an Urban Arterial Highway

Carbon monoxide (CO) exposures were measured inside a motor vehicle during 88 standardized drives on a major urban arterial highway, El Camino Real (traffic volume of 30,500-45,000 vehicles per day), over a 13-1/2 month period. On each trip (lasting between 31 and 61 minutes), the test vehicle drove the same 5.9-mile segment of roadway in both directions, for a total of 11.8 miles, passing through 20 intersections with traffic lights (10 in each direction) in three California cities (Menlo Park, Palo Alto, and Los Altos). Earlier tests showed that the test vehicle was free of CO intrusion. For the 88 trips, the mean CO concentration was 9.8 ppm, with a standard deviation of 5.8 ppm. Of nine covariates that were examined to explain the variability in the mean CO exposures observed on the 88 trips (ambient CO at two fixed stations, atmospheric stability, seasonal trend function, time of day, average surrounding vehicle count, trip duration, proportion of time stopped at lights, and instrument type), a fairly strong seasonal trend was found. A model consisting of only a single measure of traffic volume and a seasonal trend component had substantial predictive power (R² = 0.68); by contrast, the ambient CO levels, although partially correlated with average exposures, contributed comparatively little predictive power to the model. The CO exposures experienced while drivers waited at the red lights at an intersection ranged from 6.8 to 14.9 ppm and differed considerably from intersection to intersection. A model also was developed to relate the short-term variability of exposures to averaging time for trip times ranging from 1 to 20 minutes using a variogram approach to deal with the serial autocorrelation. This study shows: (1) the mass balance equation can relate exterior CO concentrations as a function of time to interior CO concentrations; (2) CO exposures on urban arterial highways vary seasonally; (3) momentary CO exposures experienced behind red lights vary with the intersection; and (4) an averaging time model can simulate exposures during short trips (20 minutes or less) on urban arterial highways.     

Aerosol speciation and mass prediction from toluene oxidation under high NOx conditions

A kinetically based gas-particle partitioning box model is used to highlight the importance of parameter representation in the prediction of secondary organic aerosol (SOA) formation following the photo-oxidation of toluene. The model is initialized using experimental data from York University's indoor smog chamber and provides a prediction of the total aerosol yield and speciation. A series of model sensitivity experiments were performed to study the aerosol speciation and mass prediction under high NO_x conditions (VOC/NO_x = 0.2). Sensitivity experiments indicate vapour pressure estimation to be a large area of weakness in predicting aerosol mass, creating an average total error range of 70 μg m^?3 (range of 5–145 μg m^?3), using two different estimation methods. Aerosol speciation proved relatively insensitive to changes in vapour pressure. One species, 3-methyl-6-nitro-catechol, dominated the aerosol phase regardless of the vapour pressure parameterization used and comprised 73–88% of the aerosol by mass. The dominance is associated with the large concentration of 3-methyl-6-nitro-catechol in the gas-phase. The high NO_x initial conditions of this study suggests that the predominance of 3-methyl-6-nitro-catechol likely results from the cresol-forming branch in the Master Chemical Mechanism taking a significant role in secondary organic aerosol formation under high NO_x conditions. Further research into the yields and speciation leading to this reaction product is recommended.     

Adjusted blank correction method for UV–vis spectroscopic analysis of PTIO-coated filters used in nitrogen oxide passive samplers

Passive sampling devices are popular in applications which do not require the monitoring of hourly concentrations. Nitrogen oxides are often collected using filters coated with 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide (PTIO). The filter extract can then be analyzed using flow injection analysis ion chromatography fitted with a copper/cadmium reduction column or UV–vis spectroscopy. When the latter is used to measure low concentrations of nitrogen oxides, absorbance by PTIO at the analytical wavelength of 545 nm contributes significantly. PTIO concentration on the filter also shows variation with filter storage and exposure time not accounted for in a single point blank subtraction at the analytical wavelength. A method is presented that uses a scaling factor to account for variations in concentration of PTIO on the field blank and provides a more accurate method for determining and correcting for the PTIO contribution to absorption when measuring ambient nitrogen oxide concentrations.     

Particulate,Carbon Monoxide,and Acid Emission Factors for Residential Wood Burning Stoves

Emissions from residential wood burning stoves are of Increasing concern in many areas. This concern is due to the magnitude of the emissions and the toxic and chemical characteristics of the pollutants. Recent testing of standard and new technology woodstoves has provided data for developing a family of particulate and carbon monoxide emission factor curves. This testing has also provided data illustrating the acidity of woodstove emissions. The particulate and carbon monoxide curves relate the actual stove emissions to the stove size and operating parameters of burn rate, fuel loading, and fuel moisture. Curves relating stove types to the acidity of emissions have also been constructed.

Test data show actual emissions vary from 3 to 50 grams per kilogram for particles and from 50 to 300 grams per kilogram for carbon monoxide. Since woodstove emissions are the largest single category of particulate emissions in many areas, it Is essential that these emissions be quantified specifically for geographic regions, allowing meaningful impact analysis modeling to be accomplished. Emission factors for particles and carbon monoxide are presented from several stove sizes and burn rates.

The acidic nature of woodstove emissions has been clearly demonstrated. Tests indicate woodstove flue gas condensate solutions to be predominantly in the 2.8 to 4.2 pH range. Condensate solutions from conventional woodstoves exhibited the characteristic buffering capacity of carboxylic acids when titrations were performed with a strong base. The environmental impact of buffered acidic woodstove emissions is not currently well understood; however, it is possible with the data presented here to make semi-quantitative estimates of acid emissions from particulate and carbon monoxide emission factors and wood use inventories.