Preliminary estimations of energy and cost for CO2 recovery by a membrane flash process utilizing waste thermal energy

The membrane flash process utilizing waste thermal energy was developed to achieve an energy-saving technology and to substitute it for a conventional regenerator. The operating conditions of the membrane flash at high temperature were studied. The petroleum refining process and iron manufacturing process were proposed for candidate processes that actually had waste energy sources. The DEA concentration and the flashing pressure had optimum values to improve the performance and reduce the energy consumption for CO₂ recovery. Energy consumptions and costs for CO₂ recovery in the membrane flash and chemical absorption were estimated by a process simulator and discussed under the same conditions. The membrane flash can achieve lower energy capture than the chemical absorption for the above industrial processes. The membrane flash is suitable for the CO₂ emission sources that had high CO₂ concentration independently of the plant scale. The chemical absorption can be applied if the plant scale is large and also the CO₂ concentration is low.     

Separation and recovery of carbon dioxide by a membrane flash process

A novel process for carbon dioxide (CO₂) separation, which was named a membrane flash process, was developed to realize an energy-saving technology and to substitute it for a conventional regenerator. The electric energy for CO₂ recovery in a membrane flash process using aluminum oxide and diethanolamine was lower than the thermal energy of the conventional chemical absorption process. Flashing at elevated temperature by the low temperature energy significantly reduced the electric energy and required much less membrane area. This process has potentiality of low cost capture of CO₂ when the low temperature energy, which is not available for other purposes, can be utilized to elevate flashing temperature.     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

Exploring the potential for improvement of the energy performance of coal fired power plants with post-combustion capture of carbon dioxide

The application of post-combustion capture (PCC) processes in coal fired power stations can result in large reductions of the CO₂-emissions, but the consequential decrease in generation efficiency is an important draw-back. The leading PCC technology is based on chemical absorption processes as this technology is the one whose scale-up status is closest to full-scale capture in power plants. The energy performance of this process is analysed in this contribution. The analysis shows that the potential for improvement of the energy performance is quite large. It is demonstrated that further development of the capture technology and the power plant technology can lead to generation efficiencies for power plants with 90% CO₂ capture which are equivalent to the current generation efficiencies without CO₂ capture, i.e. 0.4 (HHV), leading to an additional resource consumption of 16%. These improvements are possible throughout a combined improvement for the capture process and power generation processes.     

Gas conditioning—The interface between CO2 capture and transport

Gas conditioning is commonly referred to as the required processing for a produced natural gas to achieve transport and sales specifications. In this paper, gas conditioning as the processing required in the interface between CO₂ capture and transport is studied for nine different natural gas fired power plant concepts and three different CO₂ transport processes. Conditioning processes for both pipeline and ship transport are described and an enhanced process for volatile removal is developed. The energy requirement for the conditioning processes is normally between 90 and 120 kWh/tonne CO₂; however, this depends on the pressure and composition of the captured CO₂-rich stream. The loss of CO₂ in the water purge is small for most capture processes. The waste streams from the gas conditioning processes can contain large amounts of CO₂ and should therefore be further processed or reintroduced at an appropriate point upstream in the capture or gas conditioning process if possible. The integration benefit may vary depending on the composition of the CO₂-rich stream. It could be particularly interesting for processes with “innovative reactors” (membranes, sorbents, chemical looping) to integrate CO₂ capture and gas conditioning.     

Techno-economic study of CO2 capture from natural gas based hydrogen plants

Canadian oil sands are considered to be the second largest oil reserves in the world. However, the upgrading of bitumen from oil sands to synthetic crude oil (SCO) requires nearly ten times more hydrogen (H₂) than conventional crude oils. The current H₂ demand for oil sands operations is met mostly by steam reforming of natural gas (SMR). The future expansion of oil sands operations is likely to quadruple the demand of H₂ for oil sand operations in the next decade.This paper presents modified process schemes that capture CO₂ at minimum energy penalty in modern SMR plants. The approach is to simulate a base case H₂ plant without CO₂ capture and then look for the best operating conditions that minimize the energy penalty associated with CO₂ capture while maximizing H₂ production. The two CO₂ capture schemes evaluated in this study include a membrane separation process and the monoethanolamine (MEA) absorption process. A low energy penalty is observed when there is lower CO₂ production and higher steam production. The process simulation results show that the H₂ plant with CO₂ capture has to be operated at lower steam to carbon ratio (S/C), higher inlet temperature of the SMR and lower inlet temperatures for the water gas-shift (WGS) converters to attain lowest energy penalty. Also it is observed that both CO₂ capture processes, the membrane process and the MEA absorption process, are comparable in terms of energy penalty and CO₂ avoided when both are operated at conditions where lowest energy penalty exists.     

Optimization of a membrane process for CO2 capture in the steelmaking industry

Three different types of membranes were experimentally evaluated for CO₂ recovery from blast furnace effluents: semi-commercial adsorption selective carbon membranes, in-house tailored carbon molecular sieving membranes, and fixed site carrier (FSC) membranes with amine groups in the polymer backbone for active transport of CO₂. In the single gas experiments the FSC membranes showed superior selectivity for CO₂ over the other relevant gases (CO, N₂ and H₂) and high CO₂ permeance (productivity). In addition, it is easy to process and handle, relatively inexpensive to produce and the water in the feed gas is an advantage rather than a problem, since the membrane must be humidified during operation. Based on these experiments a simulation study of a full scale process was performed. The technology showed notable low energy cost, even when converted to the thermal equivalent. Total costs for the CO₂ recovery unit (CO₂ prepared for pipeline transport) were estimated to be in the range 15.0–17.5 €/tonnes CO₂.     

SE-SMR process performance in CFB reactors: Simulation of the CO2 adsorption/desorption processes with CaO based sorbents

A 3D numerical model for gas–solid flow was developed and used to study the sorption enhanced steam methane reforming (SE-SMR) and the sorbent regeneration processes with CaO based sorbent in fluidized bed reactors. The SE-SMR process (i.e., SMR and adsorption of CO₂) was carried out in a bubbling fluidized bed. The effects of pressure and steam-to-carbon ratio on the reactions are studied. High pressure and low steam-to-carbon ratio will decrease the conversion of methane. But the high pressure makes the adsorption of CO₂ faster. The methane conversion and heat utility are enhanced by CO₂ adsorption. The produced CO₂ in SMR process is adsorbed almost totally in a relative long period of time in the bubbling fluidized bed. It means that the adsorption rate of CO₂ is fast enough compared with the SMR rate. The process of sorbent regeneration was carried out in a riser. An unfeasible residence time is required to complete the regeneration process. Higher temperature makes the release of CO₂ faster, but the rate is severely restrained by the increased CO₂ concentration in gas phase. The temperature distribution is uniform over the whole reactor. Regeneration rate and capacity of sorbents are important factors in selecting the type of reactors for SE-SMR process.     

Post-combustion CO2-capture from coal-fired power plants: Preliminary evaluation of an integrated chemical absorption process with piperazine-promoted potassium carbonate

The simulation tool ASPEN Plus^® is used to model the full CO₂-capture process for chemical absorption of CO₂ by piperazine-promoted potassium carbonate (K₂CO₃/PZ) and the subsequent CO₂-compression train. Sensitivity analysis of lean loading, desorber pressure and CO₂-capture rate are performed for various solvent compositions to evaluate the optimal process parameters. EbsilonProfessional^® is used to model a 600 MW_el (gross) hard coal-fired power plant. Numerical equations for power losses due to steam extraction for solvent regeneration are derived from simulation runs. The results of the simulation campaigns are used to find the process parameters that show the lowest specific power loss. Subsequently, absorber and desorber columns are dimensioned to evaluate investment costs for these main components of the CO₂-capture process. Regeneration heat duty, net efficiency losses and column investment costs are then compared to the reference case of CO₂-capture by monoethanolamine (MEA).CO₂-capture by piperazine-promoted potassium carbonate with subsequent CO₂-compression to 110 bar shows energetic advantages over the reference process which uses MEA. Additionally, investment costs for the main components in the CO₂-capture process (absorber and desorber columns) are lower due to the enhanced reaction kinetics of the investigated K₂CO₃/PZ solvent which leads to smaller component sizes.     

Techno-economic evaluation of biogas upgrading process using CO2 facilitated transport membrane

The biogas upgrading by membrane separation process using a highly efficient CO₂-selective polyvinylamine/polyvinylalcohol (PVAm/PVA) blend membrane was investigated by experimental study and simulation with respect to process design, operation optimization and economic evaluation. This blend membrane takes advantages of the unique CO₂ facilitated transport from PVAm and the robust mechanical properties from PVA, exhibits both high CO₂/CH₄ separation efficiency and very good stability. CO₂ transports through the water swollen membrane matrix in the form of bicarbonate. CO₂/CH₄ selectivity up to 40 and CO₂ permeance up to 0.55 m³(STP)/m² h bar at 2 bar were documented in lab with synthesized biogas (35% CO₂ and 65% CH₄). Membrane performances at varying feed pressures were recorded and used as the simulation basis in this work. The process simulation of an on-farm scale biogas upgrading plant (1000 Nm³/h) was conducted. Processes with four different membrane module configurations with or without recycle were evaluated technically and economically, and the 2-stage in cascade with recycle configuration was proven optimal among the four processes. The sensitivity of the process to various operation parameters was analyzed and the operation conditions were optimized.     

Chilled ammonia process for CO2 capture

The chilled ammonia process absorbs the CO₂ at low temperature (2–10 °C). The heat of absorption of carbon dioxide by ammonia is significantly lower than for amines. In addition, degradation problems can be avoided and a high carbon dioxide capacity is achieved. Hence, this process shows good perspectives for decreasing the heat requirement. However, a scientific understanding of the processes is required. The thermodynamic properties of the NH₃–CO₂–H₂O system were described using the extended UNIQUAC electrolyte model developed by Thomsen and Rasmussen in a temperature range from 0 to 110 °C and pressure up to 100 bars. The results show that solid phases consisting of ammonium carbonate and bicarbonate are formed in the absorber. The heat requirements in the absorber and in the desorber have been studied. The enthalpy calculations show that a heat requirement for the desorber lower than 2 GJ/ton CO₂ can be reached.     

CO2 capture by adsorption: Materials and process development

Vacuum swing adsorptive (VSA) capture of CO₂ from flue gas and related process streams is a promising technology for greenhouse gas mitigation. Although early reports suggested that VSA was problematic and expensive, through the application of more logical process configurations that are appropriately coupled to the composition of the feed and product gas streams, we can now refute this early assertion. Improved cycle designs coupled with tighter temperature control are also helping to optimise performance for CO₂ separation. Simultaneously, new adsorbent materials are being developed. These separate CO₂ by selective (acid-base) reaction with surface bound amine groups (chemisorption), rather than on the basis of non-bonding interactions (physisorption). This report describes some of these recent developments from our own laboratories and points to synergies that are anticipated as a result of combining these improvements in adsorbent properties and VSA process cycles.     

Numerical parametric study on CO2 capture by indirect thermal swing adsorption

Post-combustion CO₂ capture remains one of the most-challenging issue to lower CO₂ emissions of existing power plants or heavy industry installations because of strong economy and energy efficiency aspects. The major issue comes from CO₂ dilution (4% for NGCC and 14% for PC) and the high flow rates to be treated. Furthermore, CO₂ purity has to be higher than 95% with recovery at 90%, to match the transportation/injection requirements.The MEA absorption process remains the reference today but its energy consumption (about 3 MJ/kg_CO2) and the amine consumption are still challenging drawbacks.The interest of CO₂ capture by indirect TSA (Temperature Swing Adsorption) was demonstrated experimentally in a previous work. The aim of this paper is to present the results of a numerical parametric study. Two main parameters are explored: the desorption temperature (100–200 °C) and the purge flow rate (0.1–0.5 Ndm³ min⁻¹). Four performance indicators are evaluated: CO₂ purity, recovery, productivity and specific energy consumption.Results show that purity above 95% can be achieved. Keeping the 95% target, it is possible to achieve recovery at 81% with productivity at 57.7 g_CO2/kg_ads h and a specific energy consumption of 3.23 MJ/kg_CO2, which is less than for the reference MEA process.Comparison with other adsorption processes exhibits that this process has good potential especially since some improvements are still expected from further research.     

Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants

A common characteristic of carbon capture and storage systems is the important energy consumption associated with the CO₂ capture process. This important drawback can be solved with the analysis, synthesis and optimization of this type of energy systems. The second law of thermodynamics has proved to be an essential tool in power and chemical plant optimization. The exergy analysis method has demonstrated good results in the synthesis of complex systems and efficiency improvements in energy applications.In this paper, a synthesis of pinch analysis and second law analysis is used to show the optimum window design of the integration of a calcium looping cycle into an existing coal power plant for CO₂ capture. Results demonstrate that exergy analysis is an essential aid to reduce energy penalties in CO₂ capture energy systems. In particular, for the case of carbonation/calcination CO₂ systems integrated in existing coal power plants, almost 40% of the additional exergy consumption is available in the form of heat. Accordingly, the efficiency of the capture cycle depends strongly on the possibility of using this heat to produce extra steam (live, reheat and medium pressure) to generate extra power at steam turbine. The synthesis of pinch and second law analysis could reduce the additional coal consumption due to CO₂ capture 2.5 times, from 217 to 85 MW.     

Nexus between renewable energy consumption,economic growth,and CO2 emissions in Algeria: New evidence from the Fourier-Bootstrap ARDL approach

Governments often impose new energy strategies to support new CO₂ emission-reducing technologies without affecting economic growth. Hence, this study aims to re-investigate the relationship between economic growth, renewable energy use, and CO₂ emissions in Algeria from 1990 to 2018. Motivated by the mixed findings of the existing literature, which ignore the Fourier function and bootstrap test and apply the newly developed Fourier bootstrap autoregressive distributed lag model (FARDL). Our findings indicate that renewable energy use and growth have a long-run relationship with CO₂ emissions and do not accept the existence of the Environmental Kuznets Curve (EKC) hypothesis for CO₂ emissions in Algeria. In the long term, the results show that renewable energy use has a negative and significant impact, and growth has a positive and statistically significant effect on CO₂ emissions. In the short run, the findings indicate that renewable energy use reduces CO₂ emissions, while both the growth and squared growth had positive and statistically insignificant impacts on CO₂ emissions, confirming the lack of evidence supporting the EKC hypothesis. Moreover, the causality test indicates a one-way causation from growth to renewable energy use, confirming the conservation hypothesis for Algeria and from growth to CO₂ emissions. Interestingly, we found one-way causality from CO₂ emissions to renewable energy use, attributing this to the fact that renewable energy usage has yet to reach a point that it can significantly cause a CO₂ emissions reduction. Based on the results, we recommend that policymakers design appropriate policies to decarbonize energy consumption, e.g., increasing fossil fuel costs and implementing a carbon tax. In contrast, Algeria should promote new CO₂ emission-reducing technologies without affecting economic growth, e.g., tax exemptions and reductions for enterprise owners in the renewable energy industry.     

Thermodynamic analysis on post-combustion CO2 capture of natural-gas-fired power plant

A chemical absorption, post-combustion CO₂ capture unit is simulated and an exergy analysis has been conducted, including irreversibility calculations for all process units. By pinpointing major irreversibilities, new proposals for efficient energy integrated chemical absorption process are suggested. Further, a natural-gas combined-cycle power plant with a CO₂ capture unit has been analyzed on an exergetic basis. By defining exergy balances and black-box models for plant units, investigation has been made to determine effect of each unit on the overall exergy efficiency. Simulation of the chemical absorption plant was done using UniSim Design software with Amines Property Package. For natural-gas combined-cycle design, GT PRO software (Thermoflow, Inc.) has been used. For exergy calculations, spreadsheets are created with Microsoft Excel by importing data from UniSim and GT PRO. Results show the exergy efficiency of 21.2% for the chemical absorption CO₂ capture unit and 67% for the CO₂ compression unit. The total exergy efficiency of CO₂ capture and compression unit is 31.6%.     

A novel process integration,optimization and design approach for large-scale implementation of oxy-fired coal power plants with CO2 capture

The widespread use of fossil fuels within the current energy infrastructure is considered as the largest source of anthropogenic emissions of carbon dioxide, which is largely blamed for global warming and climate change. At the current state of development, the risks and costs of non-fossil energy alternatives, such as nuclear, biomass, solar, and wind energy, are so high that they cannot replace the entire share of fossil fuels in the near future timeframe. Additionally, any rapid change towards non-fossil energy sources, even if possible, would result in large disruptions to the existing energy supply infrastructure. As an alternative, the existing and new fossil fuel-based plants can be modified or designed to be either “capture” or “capture-ready” plants in order to reduce their emission intensity through the capture and permanent storage of carbon dioxide in geological formations. This would give the coal-fired power generation units the option to sustain their operations for longer time, while meeting the stringent environmental regulations on air pollutants and carbon emissions in years to come.Currently, there are three main approaches to capturing CO₂ from the combustion of fossil fuels, namely, pre-combustion capture, post-combustion capture, and oxy-fuel combustion. Among these technology options, oxy-fuel combustion provides an elegant approach to CO₂ capture. In this approach, by replacing air with oxygen in the combustion process, a CO₂-rich flue gas stream is produced that can be readily compressed for pipeline transport and storage. In this paper, we propose a new approach that allows air to be partially used in the oxy-fired coal power plants. In this novel approach, the air can be used to carry the coal from the mills to the boiler (similar to the conventional air-fired coal power plants), while O₂ is added to the secondary recycle flow as well as directly to the combustion zone (if needed). From a practical point of view, this approach eliminates problems with the primary recycle and also lessens concerns about the air leakage into the system. At the same time, it allows the boiler and its back-end piping to operate under slight suction; this avoids the potential danger to the plant operators and equipment due to possible exposure to hot combustion gases, CO₂ and particulates. As well, by integrating oxy-fuel system components and optimizing the overall process over a wide range of operating conditions, an optimum or near-optimum design can be achieved that is both cost-effective and practical for large-scale implementation of oxy-fired coal power plants.     

Design and off-design analyses of a pre-combustion CO2 capture process in a natural gas combined cycle power plant

In this study, a cycle designed for capturing the greenhouse gas CO₂ in a natural gas combined cycle power plant has been analyzed. The process is a pre-combustion CO₂ capture cycle utilizing reforming of natural gas and removal of the carbon in the fuel prior to combustion in the gas turbine. The power cycle consists of a H₂-fired gas turbine and a triple pressure steam cycle. Nitrogen is used as fuel diluent and steam is injected into the flame for additional NO_x control. The heat recovery steam generator includes pre-heating for the various process streams. The pre-combustion cycle consists of an air-blown auto-thermal reformer, water–gas shift reactors, an amine absorption system to separate out the CO₂, as well as a CO₂ compression block. Included in the thermodynamic analysis are design calculations, as well as steady-state off-design calculations. Even though the aim is to operate a plant, as the one in this study, at full load there is also a need to be able to operate at part load, meaning off-design analysis is important. A reference case which excludes the pre-combustion cycle and only consists of the power cycle without CO₂ capture was analyzed at both design and off-design conditions for comparison. A high degree of process integration is present in the cycle studied. This can be advantageous from an efficiency stand-point but the complexity of the plant increases. The part load calculations is one way of investigating how flexible the plant is to off-design conditions. In the analysis performed, part load behavior is rather good with efficiency reductions from base load operation comparable to the reference combined cycle plant.     

Derivation of correlations to evaluate the impact of retrofitted post-combustion CO2 capture processes on steam power plant performance

When integrating a post-combustion CO₂ capture process and CO₂ compression into a steam power plant, the three interface quantities heat, electricity and cooling duty must be satisfied by the power plant, leading to a loss in net efficiency. The heat duty shows to be the largest contributor to the overall net efficiency penalty of the power plant. Additional energy penalty results from the cooling and electric power duty of the capture and compression units.In this work, the dependency of the energy penalty on the quantity and quality of the heat duty is analyzed and quantified for a state-of-the-art hard coal fired power plant. Furthermore, the energy penalty attributed to the additional cooling and power duty is quantified. As a result correlations are provided which enable to predict the impact of the heat, cooling and electricity duty of post-combustion CO₂ capture processes on the net output of a steam power plant in a holistic approach.     

Corrosion and polarization behavior of carbon steel in MEA-based CO2 capture process

This work reveals levels of corrosion rate and polarization behavior of carbon steel immersed in aqueous solutions of monoethanolamine (MEA) used in the absorption-based carbon dioxide (CO₂) capture process for greenhouse gas reduction from industrial flue gas streams. Such information was obtained from electrochemical-based corrosion experiments under a wide range of the CO₂ capture process conditions. The corrosion of carbon steel was evaluated in respect to process parameters including partial pressure of oxygen (O₂), CO₂ loading in solution, solution velocity, solution temperature, MEA concentration and metal surface condition. Results show that the aqueous MEA solution containing CO₂ provides a favorable condition for the corrosion of carbon steel to proceed. Corrosion rate is increased by all tested process parameters. These parametric effects were explained by the electrochemical kinetic data obtained from polarization curves and by the thermodynamic data obtained from Pourbaix diagram.