粉末冶金方法在块状雄黄制备过程As2O3气体污染防治中的应用

针对现有块状雄黄火法制备工艺As2 O3气体污染严重的情况 ,提出了利用粉末冶金方法热压工艺制备块状雄黄的“浮选 化学除杂 热压制块”新工艺流程。并对热压制块工艺进行了试验研究。试验结果表明 ,在较佳工艺条件下可以制备出符合药用要求的较致密的块状雄黄 ,且该工艺不会造成As2 O3气体污染。     

污泥缺氧好氧消化的减量研究

实验主要进行缺氧好氧工艺在不同运行条件下消化效果的研究;在常温和中温下,与传统污泥好氧消化处理的效果对比,并进行pH等控制参数的统计规律分析,提出优化处理工艺条件,也为污泥缺氧好氧消化工艺的设计、运行管理和进一步研究提供可靠的理论依据。     

Impact of urban innovation on urban green development in China’s Yangtze River Economic Belt: perspectives of scale and network

Environmental Science and Pollution Research - Understanding whether and how urban innovation offers a sound solution to the dilemma of urban green development is a crucial response to mitigate the...     

Effectiveness of cascading time series models based on meteorological factors in improving health risk prediction

Environmental Science and Pollution Research - Meteorological factors, which are periodic and regular in a long run, have an unignorable impact on human health. Accurate health risk prediction...     

改进抽油机井“功率平衡”测试实现节能降耗

目前在抽油机井管理中普遍采用的平衡标准是"电流平衡",并认定电流平衡度在80%～120%之间时抽油机即为平衡。而真正判断抽油机平衡的标准是"功率平衡",即抽油机运行过程中,下冲程内电机平均功率与上冲程内电机平均功率相等。抽油机功率平衡既能实现节能目的,又能保证抽油机安全运行。从2008年7月开始率先在胜利油田进行抽油机功率平衡技术的试验及推广,2008年共调整抽油机功率平衡118井次,平均单日节电21.4kW.h,平均节电率9.90%,取得了良好的节能效果。     

Precise regulation of acid pretreatment for red mud SCR catalyst: Targeting on optimizing the acidity and reducibility

• The optimum SCR activity was realized by tuning the acid pretreatment. • Optimized catalysts showed NO_x conversion above 90%. • The NH₃ and NO adsorption capacity of Al-O₃-Fe is stronger than Fe-O₃-Fe. • The formation of almandine consumes Fe³⁺ and Al³⁺ and weakens their interaction. Red mud (RM), as an alkaline waste, was recently proved to be a promising substitute for the SCR catalyst. Dealkalization could improve the acidity and reducibility of red mud, which were critical for SCR reaction. However, the dealkalization effect depended on the reaction between acid solution and red mud. In this study, we realized the directional control of the chemical state of active sites through tuning the acid pretreatment (dealkalization) process. The pretreatment endpoint was controlled at pH values of 3–5 with diluted nitric acid. When the pH values of red mud were 3 and 5 (CRM-3 and CRM-5), activated catalysts showed NO_x conversion above 90% at 275°C–475°C. The high initial reaction rate, Ce³⁺/(Ce³⁺ + Ce⁴⁺) ratio, and surface acidity accounted for the excellent SCR performance of CRM-5 catalyst. Meanwhile, more Fe³⁺ on the CRM-3 surface improved the NH₃ adsorption. There was a strong interaction between Al and Fe in both CRM-5 and CRM-3 catalysts. DFT results showed that the adsorption capacity of the Al-O₃-Fe for NH₃ and NO is stronger than that of Fe-O₃-Fe, which enhanced the NO_x conversion of the catalyst. However, the almandine was formed in CRM-4, consumed part of Fe³⁺ and Al³⁺, and the interaction between Al and Fe was weakened. Also, deposited almandine on the catalyst surface covered the active sites, thus leading to lower NH₃-SCR activity.     

Source apportionment of bioavailable trace metals in soil based on chemical fractionation and its environmental implications

Environmental Science and Pollution Research - The bioavailable trace metals are closely related to environmental safety and human health, which might have different source characteristics from the...     

Preparation and characterization of modified dual network dust suppression gel based on sodium alginate and soluble starch

Aiming at the problems of complex environment and serious dust pollution in large open-pit coal yards, a dust suppression gel with a dual network structure was prepared by modifying the soluble starch and sodium alginate with iron ions. The changes of functional groups, thermal stability, and morphology structure before and after the reaction were analyzed by FTIR, TG-DSC, and SEM, and the formation mechanism of the dual network was revealed by XPS. Furthermore, the water absorption and water retention experiments proved that the dual network structure is more conducive to water retention than the single-layer network. According to molecular dynamics simulations and contact angle experiments, gel and adsorbed water molecules can approach coal dust molecules on their own to contact, wet, and combine with coal dust. The adhesion test proved that the dust suppression gel with iron ions had better adhesion to dust. The anti-freezing test shows that the dust suppression gel has good anti-freezing performance. The antifreeze test shows that the dust suppression gel still has excellent freeze–thaw resistance at the test temperature of??-20℃. The mechanical property test shows that the dust suppressant gel can prevent the product from being damaged by external force. The acid and alkali resistance experiments showed that the acid and alkali resistance of the gel was improved under the condition of iron ion modification, and the flying of coal powder was effectively prevented. This research provides a new theoretical idea for coal dust control in complex environment.