Chromium (VI) biosorption by immobilized Aspergillus niger in continuous flow system with special reference to FTIR analysis

Aspergillus niger was treated with acid and immobilized in calcium alginate matrix. The dynamic removal of Cr (VI) ion was studied using continuously fed column packed with immobilized biosorbent beads. Column experiments were carried out to study the effect of various bed heights (20, 30, 40 cm) under different flow rates (5, 7.5, 10 ml min(-1)) on efficiency of biosorption. The maximum time (1020 minutes; 17 hr) before breakthrough point was observed in case of 40 cm bed height with flow rate of 5ml min(-1). FTIR analysis of acid treated immobilized A. niger was used fora qualitative and preliminary analysis of chemical functional groups present on its cell wall which provided the information on nature of cell wall and Cr (VI) interaction during the process of biosorption. The IR spectra of biosorbent recorded before and after chromium biosorption had shown some changes in the band patterns, which were finally analyzed and was found that chemical interaction such as ion-exchange between carboxyl (-COOH), hydroxyl (-OH) and amine (-NH2) group of biosorbent and Chromium ion were mainlyinvolved in biosorption of Cr (VI) onto A. niger cell wall surface. The biosorbed metal was eluted from biosorbent by using 0.1 M H2SO4 as eluant. Immobilized biosorbent could be reused for five consecutive biosorption and desorption cycles without apparent loss of efficiency after its reconditioning. Considering all above factors together this paper discusses the efficient chromium biosorption process carried out by immobilized A. niger biosorbent.     

Diesel reformulation using bio-derived propanol to control toxic emissions from a light-duty agricultural diesel engine

In the Indian agricultural sector, millions of diesel-driven pump-sets were used for irrigation purposes. These engines produce carcinogenic diesel particulates, toxic nitrogen oxides (NOx), and carbon monoxide (CO) emissions which threaten the livelihood of large population of farmers in India. The present study investigates the use of n-propanol, a less-explored high carbon bio-alcohol that can be produced by sustainable pathways from industrial and crop wastes that has an attractive opportunity for powering stationary diesel engines meant for irrigation and rural electrification. This study evaluates the use of n-propanol addition in fossil diesel by up to 30% by vol. and concurrently reports the effects of exhaust gas recirculation (EGR) on emissions of an agricultural DI diesel engine. Three blends PR10, PR20, and PR30 were prepared by mixing 10, 20, and 30% by vol. of n-propanol with fossil diesel. Results when compared to baseline diesel case indicated that smoke density reduced with increasing n-propanol fraction in the blends. PR10, PR20, and PR30 reduced smoke density by 13.33, 33.33, and 60%, respectively. NOx emissions increased with increasing n-propanol fraction in the blends. Later, three EGR rates (10, 20, and 30%) were employed. At any particular EGR rate, smoke density remained lower with increasing n-propanol content in the blends under increasing EGR rates. NOx reduced gradually with EGR. At 30% EGR, the blends PR10, PR20, and PR30 reduced NOx emissions by 43.04, 37.98, and 34.86%, respectively when compared to baseline diesel. CO emissions remained low but hydrocarbon (HC) emissions were high for n-propanol/diesel blends under EGR. Study confirmed that n-propanol could be used by up to 30% by vol. with diesel and the blends delivered lower soot density, NOx, and CO emissions under EGR.     

Trends in atmospheric particulate matter in Dhaka,Bangladesh, and the vicinity

Environmental Science and Pollution Research - Dhaka and its neighboring areas suffer from severe air pollution, especially during dry season (November–April). We investigated temporal and...     

Community attitudes toward forest conservation programs through collaborative protected area management in Bangladesh

The formulation of conservation policies with options for creating protected areas is significantly influenced by the social factors of the surrounding communities. Therefore, indigenous knowledge, attitudes and perceptions of the local communities need to be explored during the planning and implementation stages of conservation projects. A government-initiated experiment in co-management was conducted in the Rema-Kalenga Wildlife Sanctuary, Bangladesh. This paper analyzes the attitudes toward conservation by members of local communities living in and around the wildlife sanctuary. Training incentives on alternative income-generating (AIG) activities and allotment of agricultural lands were distributed among the Forest User Groups. It is of interest to policy makers and resource managers whether this technique leads to improved attitudes on the part of local people. Although there were different attitudes toward protected areas and conservation, overall, a favorable attitude of the respondents was observed. The opinions of respondents also varied based on factors such as village position, village dependency level on forest resources, ethnicity and gender. Increase in annual income resulting from the augmented skills by trainings on AIG activities and getting agricultural lands leased from the Forest Department contributed significantly to the variation in respondents’ conservation attitudes. It is suggested that eliminating inequity and inequality in incentive distribution, discovering and launching training on more need-based livelihood activities, and liberalizing the restriction of resource extraction from the protected area by fixing the harvesting limit would encourage the community to be more cordially and actively involved in the conservation efforts of the sanctuary.     

Photocatalytic demulsification of oil/water emulsions containing nonionic surfactant

Environmental Science and Pollution Research - Separation of oil-water (OW) emulsions is investigated using a photocatalytic demulsification approach. Experiments were conducted using two types of...     

Microwave synthesis,characterization, and bio-efficacy of novel halogenated Schiff bases

A new series of halogenated Schiff bases was synthesized by the condensation of 5-fluoro-2-hydroxy acetophenone and 3,5-dichloro-2-hydroxy acetophenone with different alkyl amines, namely propyl, pentyl, hexyl, heptyl, octyl, nonyl, dodecyl, tetradecyl, hexadecyl, and octadecyl amines, under microwave irradiation. Newly formed molecules were characterized by Infrared and nuclear magnetic resonance (¹H NMR and ¹³C NMR) spectroscopic techniques. Further, the Schiff bases were screened for antifungal bioassay, and the results showed potential fungicidal activity against two very important plant infecting fungi, viz. Rhizoctonia solani and Sclerotium rolfsii. Among the screened compounds, 2,4-dichloro-2-[1-(propylimino)ethyl]phenol was found to be the most active compound against both R. solani (ED₅₀ 8.02 mg L^?1) and S. rolfsii (ED₅₀ 21.51 mg L^?1) followed by 2,4-dichloro-2-[1-(pentylimino) ethyl]phenol (ED₅₀ 13.02 and 29.57 mg L^?1, respectively). The synthesized compounds were also screened for antioxidant activity by 2,2-diphenyl-1-picrylhydrazyl (DPPH)-free radical scavenging technique. All the compounds showed very low to moderate activity as compared with Gallic acid.     

Exposure assessment of endocrine disruptors in bottled drinking water of Lebanon

Bisphenol A (BPA) is a commonly used monomer in various products including bottled water. Numerous studies have reported endocrine adverse effects and neoplasia associated with BPA exposure in animals. However, considerable discrepancies exist among these studies with respect to both the nature of the toxic effects and the threshold dose. In Lebanon, 19-L polycarbonate (PC) bottles of drinking water are widely used in urban areas. The present study aims at assessing BPA human exposure and associated health risks from drinking water in Lebanese. A total of 22 bottled water sources, packaged in PC, were identified from licensed and non-licensed sources. Water samples were analyzed following exposure to sunlight for 72 h. BPA in water was quantified by HPLC, and other potential organic pollutants were screened by GC/MS. Fifty-nine percent of samples showed BPA levels above detection limits (>0.05 ng/mL). The median BPA level was 0.1 ng/mL (range 0.05 to 1.37 ng/mL). The mean BPA level for the total number of samples was 0.169 ng/mL (±0.280). A higher mean BPA level was found in water from licensed companies compared to non-licensed sources, however, not statistically significant. Screening showed the presence of dibutyl-phthalate and dioctyl-phthalate in only two samples. Endocrine disruptors (EDR) are ubiquitous contaminants in bottled water in Lebanon with potential health risk implications. Although estimated exposure levels are below the reference dose (RfD), further studies are needed to quantitate exposure from various sources and to investigate EDR contribution to existing epidemics in the country.     

Exogenous melatonin reduces water deficit-induced oxidative stress and improves growth performance of Althaea rosea grown on coal mine spoils

Environmental Science and Pollution Research - Coal mining activities are responsible for significant land degradation and often long-term irreversible effects on ecosystem functioning. To better...     

Measuring, modelling and testing ozone exposure, flux and effects on vegetation in southern European conditions--what does not work? A review from Italy

Ozone (O3) exposure at Italian background sites exceeds UN/ECE concentration-based critical levels (CLe(c)), if expressed in terms of AOT40. Yet the occurrence of adverse effects of O3 on forests and crops is controversial. Possible reasons include (i) ability of response indicators to provide an unbiased estimate of O3 effects, (ii) setting of current CLe(c) in terms of cut-off value and accumulation level, (iii) response functions adopted to infer a critical level, (iv) environmental limitation to O3 uptake and (v) inherent characteristics of Mediterranean vegetation. In particular, the two latter points suggest that critical levels based on accumulated stomatal flux (CLe(f)) can be a better predictor of O3 risk than CLe(c). While this concept is largely acknowledged, a number of factors may limit its applicability for routine monitoring. This paper reviews levels, uptake and vegetation response to O3 in Italy over recent years to discuss value, uncertainty and feasibility of different approaches to risk assessment.     

Nano CuO/g-C3N4 sheets-based ultrafiltration membrane with enhanced interfacial affinity, antifouling and protein separation performances for water treatment application

To improve the interfacial affinity and antifouling properties of polyphenylsulfone(PPSU)membrane, nano CuO/g-C3 N4(g-CN) sheets were synthesized via facile calcination route as one pot synthesis method. The uniformly assembled nanohybrid fillers, CuO on g-CN sheets were confirmed by using XRD, TEM, EDX and FTIR analysis. The non-solvent induced phase inversion technique was used to fabricate the nanohybrid ultrafiltration(UF)membranes by doping different concentration(0.5–1 wt.%) of nano CuO/g-C_3 N_4(g-CN)sheets within the PPSU matrix. The results of contact angle, atomic force microscopy,energy-dispersive X-ray spectroscopy reveal that surface structure and physico-chemical properties of nanohybrid membrane plays lead role in solute interaction and rejection compared to bare membrane, M0. Furthermore, the interfacial affinity of membrane was explored in detail via surface free energy, spreading coefficient, wetting tension and reversible work of adhesion analysis. Nanohybrid UF membrane, with 0.5% of the filler(M1)displayed remarkable permeation flux of 202, 131 L/m2/hr for pure water and protein solution, respectively while maintaining a high protein rejection(96%). Moreover, the exceptional dispersion of the nanosheets in the polymer matrix enhanced FRR(79%) and decreased the overall resistance of M1 compared to the pristine membrane(M0). Overall results suggest that the incorporation of nano sheets is a facile modification technique which improves the comprehensive membrane performance and holds a great potential to be further explored for water treatment.