Effect of TiC Nanoparticles Reinforcement in Coir Fiber Based Bio/Synthetic Epoxy Hybrid Composites: Mechanical and Thermal Characteristics

Journal of Polymers and the Environment - The present investigation was performed to study the effect of titanium carbide (TiC) nanoparticles and coir fiber as hybrid reinforcements on the...     

Evaluation of membrane bioreactor for hypersaline oily wastewater treatment

Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m³ day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m³ day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS.     

Urbanization reduces resource use efficiency of phytoplankton community by altering the environment and decreasing biodiversity

Urbanization often exerts multiple effects on aquatic and terrestrial organisms, including changes in biodiversity, species composition and ecosystem functions. However, the impacts of urbanization on river phytoplankton in subtropical urbanizing watersheds remain largely unknown. Here, we explored the effects of urbanization on phytoplankton community structure（i.e., biomass, community composition and diversity） and function（i.e., resource use efficiency） in a subtropical river at watershed sca...     

Spatial systems approach to sustainable development: A conceptual framework

Even though “sustainable development” seems to have emerged as the development paradigm of the 1990s, a great deal of vagueness still surrounds the meaning, definition, and theoretical underpinnings of the concept. There is also a general lack of emphasis on the spatial dimension of sustainable development when developing relevant conceptual or environmental accounting frameworks. In clarifying the concept, this article proposes a definition that explicitly incorporates the temporal as well as the spatial dimension of sustainability. It also develops a logically consistent conceptual framework for the analysis and evaluation of sustainable development, following a spatial systems approach. Five interconnected aspatial subsystems or subsets of a spatial system are identified and their respective operational dimensions discussed. A proposed composite index calleddegree of stainable development (DSD) and its five component indicators are also outlined. The difficulties involved in operationalizing the DSD measure and the conceptual framework are noted, and the various tasks that need to be undertaken in this regard are specified. It is concluded that future research utilizing the proposed conceptual framework should not only foster the development of appropriate methodologies for the comparative evaluation of sustainable development at global, national, or regional scales, but also offer insights to appropriate decision makers at various levels regarding available options and alternative actions for the healthy development of their respective societies.     

Engineered silica nanoparticles alleviate the detrimental effects of Na+ stress on germination and growth of common bean (Phaseolus vulgaris)

Environmental Science and Pollution Research - During the past 10 years, exploiting engineered nanoparticles in agricultural sector has been rapidly increased. Nanoparticles are used to...     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Characteristics of granular sludge developed in an upflow anaerobic sludge fixed-film bioreactor treating palm oil mill effluent.

In the present study, characteristics of the granular sludge (including physical characteristics under stable conditions and process shocks arising from suspended solid overload, soluble organic overload, and high temperature; biological activity; and sludge kinetic evaluation in a batch experiment) developed in an upflow anaerobic sludge blanket fixed-film reactor for palm oil mill effluent (POME) treatment was investigated. The main aim of this work was to provide suitable understanding of POME anaerobic digestion using such a granular sludge reactor, particularly with respect to granule structure at various operating conditions. The morphological changes in granular sludge resulting from various operational conditions was studied using scanning electron microscopy and transmission electron microscopy images. It was shown that the developed granules consisted of densely packed rod- (Methanosaeta-like microorganism; predominant) and cocci- (Methanosarsina) shaped microorganisms. Methanosaeta aggregates functioned as nucleation centers that initiated granule development of POME-degrading granules. Under the suspended solid overload condition, most of the granules were covered with a thin layer of fiberlike suspended solids, so that the granule color changed to brown and the sludge volume index also increased to 24.5 from 12 to 15 mL/g, which caused a large amount of sludge washout. Some of the granules were disintegrated because of an acidified environment, which originated from acidogenesis of high influent organic load (29 g chemical oxygen demand [COD]/L d). At 60 degrees C, the rate of biomass washout increased, as a result of disintegration of the outer layer of the granules. In the biological activity test, approximately 95% COD removal was achieved within 72 hours, with an initial COD removal rate of 3.5 g COD/L d. During POME digestion, 275 mg calcium carbonate/L bicarbonate alkalinity was produced per 1000 mg COD(removed)/ L. A consecutive reaction kinetic model was used to simulate the data obtained from the sludge activity in the batch experiment. The mathematical model gave a good fit with the experimental results (R2 > 0.93). The slowest step was modeled to be the acidification step, with a rate constant between 0.015 and 0.083 hours(-1), while the rate constant for the methanogenic step was obtained to be between 0.218 and 0.361 hours(-1).     

A comparison of concentrations of polycyclic aromatic compounds detected in dust samples from various regions of the world

Settled house dust can be a source of human exposure to toxic polycyclic aromatic hydrocarbons (PAHs) through non-dietary ingestion and dermal contact. Information regarding the concentrations of various contaminants in house dust would be useful in estimating the risk associated with exposure to these compounds. This study reports on the surface loading, variability and distribution of PAHs in settled house dust collected from homes in three locations: Sumgayit, Azerbaijan; Shanxi Province, China; and southern Texas, United States. The highest PAH floor surface loadings were observed in China, followed by Azerbaijan and Texas. Median concentrations of high molecular weight (four ring and larger) PAHs ranged from a low of 0.11 microg/m(2) in Texas, to 2.9 microg/m(2) in Azerbaijan and 162 microg/m(2) in China. These trends in total surface loading and relative carcinogenicity indicate that the risk of health effects from exposure to PAHs in house dust is highest in the Chinese population and lowest in the Texas population. As anticipated, variability among dust samples from different houses within the same region was high, with coefficients of variation greater than 100%. Alkylated PAHs comprised 30-50% of the total mass of PAHs. Based on a comparison of the composition of specific components, PAHs in China and Azerbaijan were determined to be derived mainly from combustion sources rather than from unburned fossil fuels such as petroleum. These results, coupled with ongoing investigation of appropriate PAH exposure biomarkers in humans, will guide future efforts to identify ways to reduce exposures in the study areas.     

Distribution and baseline values of trace elements in the sediment of Var River catchment,southeast France

This study reports on the determination of trace element (TE)—Li, As, Co, Cs, Cu, Pb, U, and Zn—and major element (ME)—Si, Al, Fe, Mg, Ca, Mn, Na, and K—concentrations in 18 riverbed sediments and a sediment core from the Var River catchment using inductively coupled plasma mass spectrometry (ICP-MS). The results were compared with those of a reference sediment core, and the contribution of clay and organic carbon contents in the distribution of TE and ME in the sediment samples was investigated. The mean concentrations of the ME were comparable in both core and riverbed samples and were within the natural averages. In the case of TE, the concentrations were lower in riverbed sediment samples than those found in the sediment core. High mean concentration of As was observed (7.6 μg g^?1) in both core and riverbed sediments, relatively higher than the worldwide reported values. The obtained data indicated that the natural high level of arsenic might be originated from the parent rocks, especially metamorphic rocks surrounding granites and from Permian sediments. Statistical approach, viz., Pearson correlation matrix, was applied to better understand the correlation among TE in both riverbed and sediment core samples. No significant metallic contamination was detected in the low Var valley despite of the localization of several industrial facilities. Therefore, results confirm that the concentrations of the TE obtained in the riverbed sediments could be considered as a baseline guide for future pollution monitoring program.     

Arsenic in the food chain and assessment of population health risks in Bangladesh

The most consumed food samples of cereals (rice, maize and wheat), vegetables (lentil, brinjal, carrot, bean, potato, tomato, onion and chili), fruits (banana, mango and jackfruit), fish (taki, rui, pangas and tilapia), egg (chicken and duck), milk (cow) and meat (chicken, duck, beef and mutton) were collected from some markets of Bogra district northern part of Bangladesh to evaluate the levels of arsenic (As) and associated health risk to the adult’s and child inhabitants. Arsenic is a highly toxic element, and its presence in food composites is a matter of concern to the world scientists. Target hazard quotients (THQs) and target carcinogenic risk were calculated to evaluate the non-carcinogenic and carcinogenic health risk from ingested arsenic. The highest and the lowest mean concentrations of arsenic were noted in the Tilapia fish [(0.94 mg/kg, wet weight (ww)] and beef (0.012 mg/kg, ww). The daily intakes of arsenic via foodstuffs were 1.92 and 3.30 µg/kg-bw/day for rural adults and children and 1.69 and 3.04 µg/kg-bw/day for urban adults and children, respectively. The result shows the highest THQs of arsenic in cereals and vegetables for both the rural and urban inhabitants which exceed the safe limit (>1) indicating that cereals and vegetables are the main food items contributing to the potential health risk. The estimated target cancer risks from ingesting dietary arsenic all exceeded 10^?6, indicating increased risk of cancer for adults and children in the study area.