Analysis of the effects diclofenac has on Japanese medaka (Oryzias latipes) using real-time PCR

The expression levels of cytochrome P450 1A, p53 and vitellogenin were investigated in three different tissues of male medaka fish after exposure to diclofenac that is one of the main concerns among pharmaceuticals frequently found in sewage treatment plant (STP) effluents. The results showed that cytochrome P450 1A, p53 and vitellogenin were highly expressed in tissue-specific gene expression patterns after exposure to 8 mg/l and 1 μg/l of diclofenac. These elevated expression levels of three biomarkers suggested that diclofenac has potential to cause cellular toxicity, p53-related genotoxicity and estrogenic effects. It is also noteworthy that diclofenac has the potential to cause these effects even at an environmentally relevant concentration of diclofenac, 1 μg/l.     

Kinetic development and evaluation of membrane sequencing batch reactor (MSBR) with mixed cultures photosynthetic bacteria for dairy wastewater treatment

This experimental study was conducted to evaluate a membrane sequencing batch reactor (MSBR) with mixed culture photosynthetic bacteria for dairy wastewater treatment. The study was undertaken in two steps: laboratory and pilot scale experiments. In the first step, kinetics analysis of the MSBR was carried out in a laboratory scale experiment with influent COD concentration of 2500 mg/L. The pilot scale experiment was conducted to investigate the performance of the MSBR and checked the suitability of the kinetics for an engineering design. The kinetic coefficients K_s, k, k_d, Y and μ_m were found to be 174-mg-COD/L, 7.42/d, 0.1383/d, 0.2281/d and 1.69/d, respectively. There were some deviations of COD removal efficiency between the design value and the actual value. From the kinetics estimation, COD effluent from the design was 27 mg/L while the average actual COD effluent from the experiment was 149 mg/L. Due to the different light source condition, the factors relating to light energy (i.e. L_f and IR_%) must be incorporated into engineering design and performance prediction with these kinetic coefficients of the photosynthetic MSBR.     

Use of sodium transfer tissue biosensor (STTB) for monitoring of marine toxic organism

A highly sensitive sodium (Na+) transfer tissue biosensor (STTB) was designed using a frog bladder membrane to measure paralytic shellfish poisons (PSP). The STTB consists, of a Na+ electrode covered by the membrane, which was then integrated into a flow-through system for continuous measurements. In the absence of Na+ channel blocker, active transfer of Na+ occurred from inside to outside across the frog membrane. When the STTB was used to measure the Na+ -dependent dissociation of PSP, it was able to detect PSB at a level contained in a single cell. However, 5 fg or higher (100 cells or more) is needed for accurate and reproducible measurements. The toxicity obtained by the STTB was significantly correlated (r = 0.9449) to that determined by the HPLC. Therefore, the simple method of the STTB can be used not only to detect a low level PSP in toxic plankton populations, but also to monitor poisons in shellfish.     

Development of an empirical equation for the transverse dispersion coefficient in natural streams

In this study, a new empirical equation for the transverse dispersion coefficient has been developed based on the hydraulic and geometric parameters in natural streams using a regression technique. First, a total of 32 data sets in 16 streams were collected. Among those sets, 16 sets were used for deriving the new equation, and the other 16 sets were used for verifying the equation. Then, through dimensional analysis, it was found that the normalized transverse dispersion coefficient is associated with several parameters such as sinuosity, aspect ratio, and a friction term. The robust least square method was applied to estimate regression coefficients. The newly proposed equation was proven to be superior in explaining the dispersion characteristics of natural streams more precisely compared to the existing equations.     

Practices in dioxin emission reduction by special regulatory enforcement and utilizing advanced control technologies for incinerators in Korea

This study strives to estimate the emission of dioxin and furthermore attempts to find the best technological control methods available for waste incinerators by investigating the emission status thereof. In order to incorporate the Stockholm Convention, a particular stringent law was promulgated in Korea and in recent years incinerators were forced to utilize better technological control. After the enforcement of special dioxin emission regulation in 2003, the average concentration of dioxin emitted from municipal and industrial waste incinerators decreased from 15.25 and 12.86 ng TEQ Nm(-3) to 5.53 and 4.96 ng TEQ Nm(-3) in 2001 and 2004, respectively. Based on test results at commercial plants, several best arranged sets of air pollution control devices (APCDs) were suggested in order to provide guidelines to help operators. These sets included combinations of spray dry absorbers, bag type filters, wet scrubbers, selective catalytic reductions and electrostatic precipitators. Different suggestions and real installations of APCD arrangement were investigated during the years around the regulation in effective. The results were presented depending on the capacity of the incinerators and different waste streams to observe the efforts to reduce dioxin emission by operators of incineration plants. The annual amount of dioxin emission from the incinerators is expected to be 212.5 g-TEQ in 2011 and 234.3g-TEQ in 2015, respectively, compared to 891.6g-TEQ recorded in 2001. The enforcement of new regulation and the installation of better APCDs showed the significant effect on such reduction. This reduction in dioxin emission from incinerators confirmed the nation's commitment to the regulatory requirement set by the Stockholm Convention.     

Phenanthrene degradation in Arthrobacter sp. P1-1: initial 1,2-, 3,4- and 9,10-dioxygenation, and meta- and ortho-cleavages of naphthalene-1,2-diol after its formation from naphthalene-1,2-dicarboxylic acid and hydroxyl naphthoic acids

Arthrobacter sp. P1-1, isolated from a polycyclic aromatic hydrocarbon (PAH)-contaminated site in Hilo, HI, USA, can decompose phenanthrene (40 mg l⁻¹) completely within 7 days. A detailed phenanthrene metabolism map was constructed based on metabolite analysis and replacement cultures. Initial dioxygenation occurs on 1,2-, 3,4-, and 9,10-C of phenanthrene, dominantly on 3,4-C positions. Rapid accumulation of 5,6- and 7,8-benzocoumarin suggests that phenanthrene-1,2- and -3,4-diols mainly undergo meta-cleavage. However, a trace amount of o-carboxyvinylnaphthoates and diphenic acid indicates a limited extent of ortho-cleavage of the diols. Naphthalene-1,2-diol, as a common and converged metabolite, was formed from 1-[(E)-2-carboxyvinyl]-2-naphthoic acid, naphthalene-1,2-dicarboxylic acid, and 1-hydroxy-2-naphthoic acid in separate culture tests. Naphthalene-1,2-diol is then degraded in a dominant phthalic acid pathway and a minor salicylic acid pathway. Several metabolites of phthalic acid were found, while no salicylic acid metabolites were detected. The strain P1-1 likely has a very diverse set of PAH-degrading enzymes or the enzymes having relaxed substrate-specificity.     

Characteristics of ashes from different locations at the MSW incinerator equipped with various air pollution control devices

The characteristics of ashes from different locations at a municipal solid waste incinerator (MSWI) equipped with a water spray tower (WST) as a cooling system, and a spray dryer adsorber (SDA), a bag filter (BF) and a selective catalytic reactor (SCR) as air pollution control devices (APCD) was investigated to provide the basic data for further treatment of ashes. A commercial MSWI with a capacity of 100 tons per day was selected. Ash was sampled from different locations during the normal operation of the MSWI and was analyzed to obtain chemical composition, basicity, metal contents and leaching behavior of heavy metals. Basicity and pH of ash showed a broad range between 0.08-9.07 and 3.5-12.3, respectively. Some major inorganics in ash were identified and could affect the basicity. This could be one of the factors to determine further treatment means. Partitioning of hazardous heavy metals such as Pb, Cu, Cr, Hg and Cd was investigated. Large portions of Hg and Cd were emitted from the furnace while over 90% of Pb, Cu and Cr remained in bottom ash. However 54% of Hg was captured by WST and 41% by SDA/BF and 3.6% was emitted through the stack, while 81.5% of Cd was captured by SDA/BF. From the analysis data of various metal contents in ash and leach analysis, such capturing of metal was confirmed and some heavy metals found to be easily released from ash. Based on the overall characteristics of ash in different locations at the MSWI during the investigation, some considerations and suggestions for determining the appropriate treatment methods of ash were made as conclusions.     

Approaches to Evaluate Water Quality Model Parameter Uncertainty for Adaptive TMDL Implementation1

Abstract: The National Research Council recommended Adaptive Total Maximum Daily Load implementation with the recognition that the predictive uncertainty of water quality models can be high. Quantifying predictive uncertainty provides important information for model selection and decision‐making. We review five methods that have been used with water quality models to evaluate model parameter and predictive uncertainty. These methods (1) Regionalized Sensitivity Analysis, (2) Generalized Likelihood Uncertainty Estimation, (3) Bayesian Monte Carlo, (4) Importance Sampling, and (5) Markov Chain Monte Carlo (MCMC) are based on similar concepts; their development over time was facilitated by the increasing availability of fast, cheap computers. Using a Streeter‐Phelps model as an example we show that, applied consistently, these methods give compatible results. Thus, all of these methods can, in principle, provide useful sets of parameter values that can be used to evaluate model predictive uncertainty, though, in practice, some are quickly limited by the “curse of dimensionality” or may have difficulty evaluating irregularly shaped parameter spaces. Adaptive implementation invites model updating, as new data become available reflecting water‐body responses to pollutant load reductions, and a Bayesian approach using MCMC is particularly handy for that task.     

Inhibition of Murine Norovirus and Feline Calicivirus by Edible Herbal Extracts

Human noroviruses (HuNoVs) cause foodborne and waterborne viral gastroenteritis worldwide. Because HuNoV culture systems have not been developed thus far, no available medicines or vaccines preventing infection with HuNoVs exist. Some herbal extracts were considered as phytomedicines because of their bioactive components. In this study, the inhibitory effects of 29 edible herbal extracts against the norovirus surrogates murine norovirus (MNV) and feline calicivirus (FCV) were examined. FCV was significantly inhibited to 86.89 ± 2.01 and 48.71 ± 7.38% by 100 μg/mL of Camellia sinensis and Ficus carica, respectively. Similarly, ribavirin at a concentration of 100 μM significantly reduced the titer of FCV by 77.69 ± 10.40%. Pleuropterus multiflorus (20 μg/mL) showed antiviral activity of 53.33 ± 5.77, and 50.00 ± 16.67% inhibition was observed after treatment with 20 μg/mL of Alnus japonica. MNV was inhibited with ribavirin by 59.22 ± 16.28% at a concentration of 100 μM. Interestingly, MNV was significantly inhibited with 150 µg/mL Inonotus obliquus and 50 μg/mL Crataegus pinnatifida by 91.67 ± 5.05 and 57.66 ± 3.36%, respectively. Treatment with 20 µg/mL Coriandrum sativum slightly reduced MNV by 45.24 ± 4.12%. The seven herbal extracts of C. sinensis, F. carica, P. multiflorus, A. japonica, I. obliquus, C. pinnatifida, and C. sativum may have the potential to control noroviruses without cytotoxicity.     

Application of titania from Ti-Salt flocculated sludge for UHPC

Journal of Material Cycles and Waste Management - In this paper, Ultra High Performance Concrete (UHPC) specimens using Titania extracted from Ti-Salt agglomerated sludge analyzed both the...