Flow injection spectrophotometric determination of methamidophos using online hydrolysis

A new protocol for the online spectrophotometric determination of methamidophos has been developed. The method is based on online hydrolysis of methamidophos, and the resulting hydrolyzed product is reacted with sodium nitroproside to form a colored complex. The calibration curve is linear over the concentration range of 0.5–20 μgml^?–?1, with a molar absorptivity of 2.5×10⁴ L mol^?1 cm^?1. The method is fast and reproducible with a sample throughput of 90 samples/h. The method is successfully applied to formulations and real samples.     

Determination of ametryn in sugarcane and ametryn–atrazine herbicide formulations using spectrophotometric method

A sensitive spectrophotometric method has been developed for determination of ametryn in agricultural samples. The proposed method was based on reaction with pyridine and further coupling with sulfanilic acid to form a colored product. The absorbance was measured at 400 nm with a molar absorptivity of 2.1 × 10⁵ L mol⁻¹ cm⁻¹. The method shows a linear range from 0.2–20 μg mL⁻¹ with limit of detection and limit of quantification 0.16 and 0.54 μg mL⁻¹, respectively. The method has been successfully applied to the determination of ametryn in sugarcane juice and commercial formulations after separation of ametryn from triazine herbicides based on solvent extraction. Recovery values were found to be in the range of 96.0 ± 0.2% to 98.4 ± 0.1%.     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.     

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity

Animal feeding operations (AFOs) produce particulate matter (PM) and gaseous pollutants. Investigation of the chemical composition of PM_2.5 inside and in the local vicinity of AFOs can help to understand the impact of the AFO emissions on ambient secondary PM formation. This study was conducted on a commercial egg production farm in North Carolina. Samples of PM_2.5 were collected from five stations, with one located in an egg production house and the other four located in the vicinity of the farm along four wind directions. The major ions of NH₄⁺, Na⁺, K⁺, SO₄^2?, Cl^?, and NO₃^? were analyzed using ion chromatography (IC). In the house, the mostly abundant ions were SO₄^2?, Cl^?, and K⁺. At ambient stations, SO₄^2?, and NH₄⁺ were the two most abundant ions. In the house, NH₄⁺, SO₄^2?, and NO₃^? accounted for only 10% of the PM_2.5 mass; at ambient locations, NH₄⁺, SO₄^2?, and NO₃^? accounted for 36–41% of the PM_2.5 mass. In the house, NH₄⁺ had small seasonal variations indicating that gas-phase NH₃ was not the only major force driving its gas–particle partitioning. At the ambient stations, NH₄⁺ had the highest concentrations in summer. In the house, K⁺, Na⁺, and Cl^? were highly correlated with each other. In ambient locations, SO₄^2? and NH₄⁺ had a strong correlation, whereas in the house, SO₄^2? and NH₄⁺ had a very weak correlation. Ambient temperature and solar radiation were positively correlated with NH₄⁺ and SO₄^2?. This study suggests that secondary PM formation inside the animal house was not an important source of PM_2.5. In the vicinity, NH₃ emissions had greater impact on PM_2.5 formation.

ImplicationsThe chemical composition of PM_2.5 inside and in the local vicinity of AFOs showed the impact of the AFO emissions on ambient secondary PM_2.5 formation, and the fate and transport of air pollutants associated with AFOs. The results may help to manage in-house animal facility air quality, and to develop regional air quality control strategies and policies, especially in animal agriculture-concentrated areas.     

Biodegradation potential of MTBE in a fractured chalk aquifer under aerobic conditions in long-term uncontaminated and contaminated aquifer microcosms

The potential for aerobic biodegradation of MTBE in a fractured chalk aquifer is assessed in microcosm experiments over 450 days, under in situ conditions for a groundwater temperature of 10 °C, MTBE concentration between 0.1 and 1.0 mg/L and dissolved O₂ concentration between 2 and 10 mg/L. Following a lag period of up to 120 days, MTBE was biodegraded in uncontaminated aquifer microcosms at concentrations up to 1.2 mg/L, demonstrating that the aquifer has an intrinsic potential to biodegrade MTBE aerobically. The MTBE biodegradation rate increased three-fold from a mean of 6.6 ± 1.6 μg/L/day in uncontaminated aquifer microcosms for subsequent additions of MTBE, suggesting an increasing biodegradation capability, due to microbial cell growth and increased biomass after repeated exposure to MTBE. In contaminated aquifer microcosms which also contained TAME, MTBE biodegradation occurred after a shorter lag of 15 or 33 days and MTBE biodegradation rates were higher (max. 27.5 μg/L/day), probably resulting from an acclimated microbial population due to previous exposure to MTBE in situ. The initial MTBE concentration did not affect the lag period but the biodegradation rate increased with the initial MTBE concentration, indicating that there was no inhibition of MTBE biodegradation related to MTBE concentration up to 1.2 mg/L. No minimum substrate concentration for MTBE biodegradation was observed, indicating that in the presence of dissolved O₂ (and absence of inhibitory factors) MTBE biodegradation would occur in the aquifer at MTBE concentrations (ca. 0.1 mg/L) found at the front of the ether oxygenate plume. MTBE biodegradation occurred with concomitant O₂ consumption but no other electron acceptor utilisation, indicating biodegradation by aerobic processes only. However, O₂ consumption was less than the stoichiometric requirement for complete MTBE mineralization, suggesting that only partial biodegradation of MTBE to intermediate organic metabolites occurred. The availability of dissolved O₂ did not affect MTBE biodegradation significantly, with similar MTBE biodegradation behaviour and rates down to ca. 0.7 mg/L dissolved O₂ concentration. The results indicate that aerobic MTBE biodegradation could be significant in the plume fringe, during mixing of the contaminant plume and uncontaminated groundwater and that, relative to the plume migration, aerobic biodegradation is important for MTBE attenuation. Moreover, should the groundwater dissolved O₂ concentration fall to zero such that MTBE biodegradation was inhibited, an engineered approach to enhance in situ bioremediation could supply O₂ at relatively low levels (e.g. 2–3 mg/L) to effectively stimulate MTBE biodegradation, which has significant practical advantages. The study shows that aerobic MTBE biodegradation can occur at environmentally significant rates in this aquifer, and that long-term microcosm experiments (100s days) may be necessary to correctly interpret contaminant biodegradation potential in aquifers to support site management decisions.     

Production and Purification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Degrading Enzyme from Streptomyces sp. AF-111

A poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) degrading bacterial strain designated as AF-111 was isolated from sewage sludge sample. The bacterium was identified by 16S rRNA gene sequencing. The results revealed that strain AF-111 showed 99 % similarity with Streptomyces althioticus strain NRRL B-3981 and designated as Streptomyces sp. strain AF-111. An extracellular PHBV depolymerase enzyme was produced under optimized conditions and purified through ammonium sulphate fractionation and column chromatography. The enzyme was purified to homogeneity, indicated by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and molecular weight was found to be approximately 51 kDa. Effect of temperature, pH, metal ions and inhibitors on the PHBV depolymerase activity was determined. The enzyme was stable at wide range of temperature (35–55 °C) and pH (6–8). PHBV depolymerase was stable in the presence of different metal ions except iron and zinc which had inhibitory effect on depolymerase activity. Both ethylenediamine teteracetic acid and phenylmethyl sulphonyl fluoride strongly inhibited enzyme activity which indicates that this enzyme belongs to the serine hydrolase family like other polyhydroxyalkanoate depolymerases. The results show that a depolymerase from strain AF-111 can effectively degrade PHBV, therefore, it can be applied in the process of biochemical monomer recycling.     

Canada shows the way

Editorial

Canada shows the way     

Mobilising social energy against environmental challenge: understanding the groundwater recharge movement in western India

This paper explores a large-scale and growing popular movement to augment groundwater recharge in the Saurashtra region of western India, an area that has been facing acute water scarcity and other associated problems. As a social phenomenon, the movement is at an early stage of its development. However, it is interesting to study it for many reasons. First, even a decade after it began, it is still growing in scale and following. Second, it is entirely spontaneous and internally driven, necessitating no public resources or support. Third, early indications are that its social and ecological impacts are beneficial and highly significant. Fourth, the movement was catalysed and spearheaded by spiritual and religious institutions, which made ingenious use of non-economic messages and motivators in forging a new natural resource ethic based on a broad, collective rationality among movement members. It appears, however, that beyond a threshold, the movement acquired a logic and energy of its own which might fuel its future sustainability and growth. Finally, the movement has important lessons to offer because mobilising social energy on such a scale and intensity can perhaps be one of most effective responses to many of the environmental challenges the world faces today.     

Three-dimensional nickel ion transport through porous media using magnetic resonance imaging

The transport of Ni2+ ions in a column, filled with porous media, was observed in three dimensions and time by magnetic resonance imaging (MRI) in a clinical scanner. For porous media we used glass beads or quartz sand in a saturated continuous flow mode. The magnetic moment of Ni2+ decreased the T1 relaxation time of 1H in aqueous solution. This concentration-dependent effect was used by a fast low angle shot (FLASH) MRI sequence for imaging the concentration of the dissolved ions. Since Ni2+ behaves as a conservative tracer under the chosen conditions, the tracer motion was representative for the water flow in the porous medium. Currently, we can achieve an isotropic spatial resolution of 1.5 mm and a temporal resolution of 170 s. The transport observation gives direct access to hydraulic flow properties of the porous media. The fluid flow velocity field was calculated by a fronttracking method and the statistical properties of the velocities were investigated. We also compared the experimental data with the three-dimensional particle tracking model PARTRACE, which uses the experimental flow field as input.     

Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.