Ionic composition of TSP and PM2.5 during dust storms and air pollution episodes at Xi'an,China

TSP and PM_2.5 samples were collected at Xi'an, China during dust storms (DSs) and several types of pollution events, including haze, biomass burning, and firework displays. Aerosol mass concentrations were up to 2 times higher during the particulate matter (PM) events than on normal days (NDs), and all types of PM led to decreased visibility. Water-soluble ions (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, F^?, Cl^?, NO₃^?, and SO₄^2?). were major aerosol components during the pollution episodes, but their concentrations were lower during DSs. NH₄⁺, K⁺, F^?, Cl^?, NO₃^?, and SO₄^2? were more abundant in PM_2.5 than TSP but the opposite was true for Mg²⁺ and Ca²⁺. PM collected on hazy days was enriched with secondary species (NH₄⁺, NO₃^?, and SO₄²) while PM from straw combustion showed high K⁺ and Cl^?. Firework displays caused increases in K⁺ and also enrichments of NO₃^? relative to SO₄^2?. During DSs, the concentrations of secondary aerosol components were low, but Ca²⁺ was abundant. Ion balance calculations indicate that PM from haze and straw combustion was acidic while the DSs samples were alkaline and the fireworks' PM was close to neutral. Ion ratios (SO₄^2?/K⁺, NO₃^?/SO₄^2?, and Cl^?/K⁺) proved effective as indicators for different pollution episodes.     

Ammonia concentrations and modeling of inorganic particulate matter in the vicinity of an egg production facility in Southeastern USA

Ammonia (NH₃) is an important base gas and can react with acidic species to form atmospheric aerosols. Due to the rapid growth of poultry and swine production in the North Carolina Coastal Plain, atmospheric NH₃ concentrations across the region have subsequently increased. Ammonia concentrations and inorganic particulate matter (PM) at four ambient stations in the vicinity of an egg production facility were measured for 1 year using PM_2.5 speciation samplers with honeycomb denuders and ion chromatography (IC). Meanwhile, concentrations of NH₃ and inorganic PM in one of the egg production houses were also simultaneously measured using a gas analyzer for NH₃ and the filter pack plus IC method for inorganic PM. An equilibrium model-ISORROPIA II was applied to predict the behavior of inorganic aerosols in response to precursor gas concentrations and environmental parameters. Average ambient NH₃ concentrations varied from 10.0 to 27.0 μg/m³, and they were negatively correlated with the distances from the ambient location to the nearest egg production house exhausts. Ambient NH₃ concentrations were higher in warm seasons than in cold seasons. Measured NH₃ concentrations agreed well with ISORROPIA II model predictions at all sampling stations. For the ambient stations, there was a good agreement in particle phase NH₄ ⁺ between the model simulation and observations. For the in-house station, the model simulation was applied to correct the overestimation of particle phase NH₄ ⁺ due to gas phase NH₃ breaking through the denuders. Changes in SO₄ ^2?, NO₃ ^?, and Cl^? yield proportional changes in inorganic PM mass. Due to the abundance of NH₃ gas in the vicinity area of the monitored farm, changes in NH₃ concentrations had a small effect on inorganic PM mass. Aerosol equilibrium modeling may be used to assess the influence of precursor gas concentrations on inorganic PM formation when the measurements for some species are unavailable.     

Determination of sources of fine particles in different ambient atmospheres in South Korea using a chemical mass balance model

Abstract

To determine the sources of particulate matter less than 2.5?μm (PM_2.5 in different ambient atmospheres (urban, roadside, industrial, and rural sites), the chemical components of PM_2.5 such as ions (Cl^-, NO₃^-, SO₄^2-, NH₄⁺, Na⁺, K⁺, Ca²⁺, and Mg²⁺), carbonaceous species, and elements (Al, As, Ba, Cd, Cu, Fe, Mn, Ni, Pb, Se, V, and Zn) were measured. The average mass concentrations of PM_2.5 at the urban, roadside, industrial, and rural sites were 31.5?±?14.8, 31.6?±?22.3, 31.4?±?16.0, and 25.8?±?12.4?μg/m³, respectively. Except for secondary ammonium sulfate and ammonium nitrate, the model results showed that the traffic source (i.e., the sum of gasoline and diesel vehicle sources) was the most dominant source of PM_2.5 (17.1%) followed by biomass burning (13.8%) at the urban site. The major primary sources of PM_2.5 were consistent with the site characteristics (diesel vehicle source at the roadside site, coal-fired plants at the industrial site, and biomass burning at the rural site). Seasonal data from the urban site suggested that ammonium sulfate and ammonium nitrate were the most dominant sources of PM_2.5 during all seasons. Further, the contribution of road dust source to PM_2.5 increased during spring and fall seasons. We conclude that the determination of the major PM_2.5 sources is useful for establishing efficient control strategies for PM_2.5 in different regions and seasons.     

Ionic composition of PM2.5 at urban sites of northern Greece: secondary inorganic aerosol formation

This study investigates the water-soluble ionic constituents (Na⁺, K⁺, NH₄ ⁺, Ca²⁺, Mg²⁺, Cl^?, NO₃ ^?, SO₄ ^2?) associated to PM_2.5 particle fraction at two urban sites in the city of Thessaloniki, northern Greece, an urban traffic site (UT) and urban background site (UB). Ionic constituents represent a significant fraction of PM_2.5 mass (29.6 at UT and 41.5 % at UB). The contribution of marine aerosol was low (<1.5 %). Secondary inorganic aerosols (SIA) represent a significant fraction of PM_2.5 mass contributing to 26.9?±?12.4 % and 39.2?±?13.2 % at UT and UB sites, respectively. Nitrate and sulfate are fully neutralized by ammonium under the existing conditions. The ionic constituents were evaluated in relation to their spatial and temporal variation, their gaseous precursors, meteorological conditions, local and long-range transport.     

Ambient suspended particulate matters and related chemical species study in central Taiwan,Taichung during 1998–2001

Ambient suspended particulate (PM_2.5, PM_2.5–10, TSP) was collected from June 1998 to February 2001 in Taichung, central Taiwan. In addition, the related water-soluble ionic species (Cl⁻, NO₃⁻, SO₄²⁻, Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺) and metallic species (Fe, Zn, Pb, Ni) were also analyzed in this study. The results showed that the concentrations of particulate mass are higher in the traffic site (CCRT) than the other sampling sites in this study. Also, the fine particle (PM_2.5) concentration is the dominant species of the total suspended particles in Taichung, central Taiwan. The dominant species for PM_2.5 are sulfate and ammonium at all sampling sites during the period of 1998–2001. The results of diurnal variation at THUC sampling site are also discussed in this study. Overall, acidic and secondary aerosol (Cl⁻, NO₃⁻, SO₄²⁻ and NH₄⁺) is a more serious air pollutant issue in southern and central Taiwan than at several sites around the world. Therefore, ambient suspended particulate monitoring in Taichung, central Taiwan will be continuing in our following study to provide more information for the government to formulate environmental strategy.     

Chemical characterization of particles in winter-night smog in Tokyo

Continuous measurement of PM₁₀, PM_2.5 and carbon (organic, elemental composition) concentrations, and samples of PM₁₀ and PM_2.5 collected on a polycarbonate membrane filter (Nuclepore^®, pore size: 0.8 μm), were carried out during a period from December 1998 to January 1999 at Shinjuku in Tokyo in order to investigate the chemical characterization of particles in winter-night smog within a large area of the Japan Kanto Plain including the Tokyo Metropolitan area. These were measured using an ambient particulate monitor (tapered element oscillating microbalance—TEOM) and a carbon particulate monitor. Elemental compositions in the filter samples of PM₁₀ and PM_2.5 were determined by means of particle-induced X-ray emission (PIXE) analysis. Ionic species (anion: F⁻, Cl⁻, NO₃⁻, SO₄²⁻ and C₂O₄²⁻; cation: Na⁺, NH₄⁺, K⁺, Ca²⁺ and Mg²⁺) in the filter samples were analyzed by ion chromatography. The temporal variation patterns of PM_2.5 were similar to those of PM₁₀ and carbon. PM_2.5 made up 90% of the PM₁₀ at a high concentration, and 70% at a low concentration. Concentrations of 22 elements in both the PM₁₀ and PM_2.5 samples were consistently determined by PIXE, and Na, Mg, Al, Si, S, Cl, K, Ca, Fe, Zn and Pb were found to be the major components. Among these S and Cl were the most dominant elements of the PM_2.5 and PM₁₀ at high concentrations. Ionic species were mainly composed of Cl⁻, NO₃⁻, SO₄²⁻ and NH₄⁺. The component proportion of carbon, the other elements (total amount of measured elements other than S and Cl) and secondary-formed particles of PM_2.5 was similar to that of PM₁₀. The major component was carbon particles at a low concentration and secondary-formed particles at a high concentration. The proportion of NH₄NO₃ and NH₄Cl plus HCl in secondary-formed particles at a high concentration, in particular, was as high as 90%.     

Characterization of Major Chemical Components of Fine Particulate Matter in North Carolina

Abstract

This paper presents measurements of daily sampling of fine particulate matter (PM_2.5) and its major chemical components at three urban and one rural locations in North Carolina during 2002. At both urban and rural sites, the major insoluble component of PM_2.5 is organic matter, and the major soluble components are sulfate (SO₄ ^2?), ammonium (NH₄ ⁺), and nitrate (NO₃ ^?). NH₄ ⁺ is neutralized mainly by SO₄ ^2? rather than by NO₃ ^?, except in winter when SO₄ ^2? concentration is relatively low, whereas NO₃ ^? concentration is high. The equivalent ratio of NH₄ ⁺ to the sum of SO₄ ^2? and NO₃ ^? is <1, suggesting that SO₄ ^2?and NO₃ ^?are not completely neutralized by NH₄ ⁺. At both rural and urban sites, SO₄ ^2?concentration displays a maximum in summer and a minimum in winter, whereas NO₃ ^?displays an opposite seasonal trend. Mass ratio of NO₃ ^? to SO₄ ^2?is consistently <1 at all sites, suggesting that stationary source emissions may play an important role in PM_2.5 formation in those areas. Organic carbon and elemental carbon are well correlated at three urban sites although they are poorly correlated at the agriculture site. Other than the daily samples, hourly samples were measured at one urban site. PM_2.5 mass concen trations display a peak in early morning, and a second peak in late afternoon. Back trajectory analysis shows that air masses with lower PM_2.5 mass content mainly originate from the marine environment or from a continental environment but with a strong subsidence from the upper troposphere. Air masses with high PM_2.5 mass concentrations are largely from continental sources. Our study of fine particulate matter and its chemical composition in North Carolina provides crucial information that may be used to determine the efficacy of the new National Ambient Air Quality Standard (NAAQS) for PM fine. Moreover, the gas-to-particle conversion processes provide improved prediction of long-range transport of pollutants and air quality.     

Fine particulate speciation profile and emission factor of municipal solid waste incinerator established by dilution sampling method

In this study, fine particulate matter (PM_2.5) emitted from a municipal solid waste incinerator (MSWI) was collected using dilution sampling method. Chemical compositions of the collected PM_2.5 samples, including carbon content, metal elements, and water-soluble ions, were analyzed. Traditional in-stack hot sampling was simultaneously conducted to compare the influences of dilution on PM_2.5 emissions and the characteristics of the bonded chemical species. The results, established by a dilution sampling method, show that PM_2.5 and total particulate matter (TPM) emission factors were 61.6 ± 4.52 and 66.1 ± 5.27 g ton-waste^?1, respectively. The average ratio of PM_2.5/TPM is 0.93, indicating that more than 90% of PM emission from the MSWI was fine particulate. The major chemical species in PM_2.5 included organic carbon (OC), Cl^?, NH₄⁺, elemental carbon (EC) and Si, which account for 69.7% of PM_2.5 mass. OC was from the unburned carbon in the exhaust, which adsorbed onto the particulate during the cooling process. High Cl^? emission is primarily attributable to wastes containing plastic bags made of polyvinyl chloride, salt in kitchen refuse and waste biomass, and so on. Minor species that account for 0.01–1% of PM_2.5 mass included SO₄^2-, K⁺, Na, K, NO₃^?, Al, Ca²⁺, Zn, Ca, Cu, Fe, Pb, and Mg. The mean ratio of dilution method/in-stack hot method was 0.454. The contents of water-soluble ions (Cl^?, SO₄^2-, NO₃^?) were significantly enriched in PM_2.5 via gas-to-particle conversion in the dilution process. Results indicate that in-stack hot sampling would underestimate levels of these species in PM_2.5.

Implications: PM_2.5 samples from a municipal solid waste incinerator (MSWI) were collected simultaneously by a dilution sampling technique and a traditional in-stack method. PM_2.5 emission factors and chemical speciation profiles were established. Dilution sampling provides more reliable data than in-stack hot sampling. The results can be applied to estimate the PM_2.5 emission inventories of MSWI, and the source profile can be used for contribution estimate of chemical mass balance modeling.     

Sources of submicron aerosol during fog-dominated wintertime at Kanpur

The main objective of this atmospheric study was to determine the major sources of PM₁ (particles having aerodynamic diameter <1.0 μm) within and near the city of Kanpur, in the Indo-Gangetic Plain. Day and night, 10 h long each, filter-based aerosol samples were collected for 4 months (November 2009 to February 2010) throughout the winter season. These samples were subjected to gravimetric and quantitative chemical analyses for determining water-soluble ions (NH₄ ⁺, F^?, Cl^?, NO₃ ^?, and SO₄ ^2?) using an ion chromatograph and trace elements using an inductively coupled plasma–optical emission spectrometer. The mean PM₁ mass concentrations were recorded as 114?±?71 μg/m³ (day) and 143?±?86 μg/m³ (night), respectively. A significantly higher diurnal contribution of ions (NH₄ ⁺, F^?, Cl^?, NO₃ ^?, and SO₄ ^2?) in PM₁ mass was observed during the fog-affected days and nights throughout the winter season, for which the average values were recorded as 38.09?±?13.39 % (day) and 34.98?±?12.59 % (night), respectively, of the total PM₁ mass. This chemical dataset was then used in a source-receptor model, UNMIX, and the model results are described in detail. UNMIX provided a maximum number of five source factors, including crustal material, composite vehicle, secondary aerosol, coal combustion, and iron/steel production and metallurgical industries, as the dominant air pollution sources for this study.     

NH4+, NO3−, and SO42− in roadside and rural size-resolved particles and transformation of NO2/SO2 to nanoparticle-bound NO3−/SO42−

This study investigates ammonium, nitrate, and sulfate (NH₄⁺, NO₃^?, and SO₄^2?) in size-resolved particles (particularly nano (PM_0.01–0.056)/ultrafine (PM_0.01–0.1)) and NO_x/SO₂ collected near a busy road and at a rural site. The average (mass) cumulative fraction of secondary inorganic aerosols (SO₄^2?+NO₃^?+NH₄⁺) in nano or ultrafine particles at the roadside was found to be three to four times that at the rural site. The above three secondary inorganic aerosol species were present in similar cumulative fractions in particles of size 1–18 μm at both sites; however, dissimilar fractions were observed for Cl^?, Na⁺, and K⁺. The nitrogen ratios (NRs: NR = NO₃^??N/(NO₃^??N + NO₂–N)), sulfur ratios (SRs: SR = SO₄^2??S/(SO₄^2??S + SO₂–S)), dNR/D_P (derivative of NR with respect to D_P (particle diameter)), and dSR/D_P (derivative of SR with respect to D_P) at the roadside were higher than those at the rural site for nano/ultrafine particles. At both sites (particularly the roadside), the nanoparticles had significantly higher dNR/D_P and dSR/D_P values than differently sized particles, implying that NO₃^?/SO₄^2? (from NO₂/SO₂ transformation or NO₃^?/SO₄^2? deposition) were present on these particles.     

The characterization of water-soluble inorganic ions in PM2.5 during a winter period in Xi'an,China

The characteristics of water-soluble inorganic ions (WSIIs) during a winter period in a suburb of Xi'an, China, were investigated. Our results show that the total mass concentration of the dominant WSIIs (8) was 91.27 µg m^–3, accounting for 50.1% of the total mass concentration of PM_2.5 (particulates with a size of 2.5 µm or less). Secondary inorganic aerosols (SO₄^2?, NO₃^? and NH₄⁺) were the most abundant ions, accounting for up to 95.12% of the total ions. By using the anion and cation equivalence ratio method, PM_2.5 was shown to have weak alkalinity, and the chemical forms of WSIIs were mainly (NH₄)₂SO₄ and NH₄NO₃. The sulfur oxidation ratio (SOR) and nitrogen oxidation ratio (NOR) suggested that larger proportions of SO₄^2? and NO₃^? were formed by gas-phase SO₂ and NO₂ in the sampling site. Ratio analysis also indicated that anthropogenic sources significantly contributed to WSII pollution. Among the anthropogenic sources, fixed pollution sources were found to be dominant over mobile sources.     

Source Identification and Trends in Concentrations of Gaseous and Fine Particulate Principal Species in Seoul,South Korea

Abstract

Ambient measurements were made using two sets of annular denuder system during the four seasons (April 2001 to February 2002) and were then compared with the results during the period of 1996–1997 to estimate the trends and seasonal variations in concentrations of gaseous and fine particulate matter (PM_2.5) principal species. Annual averages of gaseous HNO₃ and NH₃ increased by 11% and 6%, respectively, compared with those of the previous study, whereas HONO and SO₂ decreased by 11% and 136%, respectively. The PM_2.5 concentration decreased by ～17%, 35% for SO₄ ^2?, and 29% for NH₄ ⁺, whereas NO₃ ^? increased by 21%. Organic carbon (OC) and elemental carbon (EC) were 12.8 and 5.98 μg/m^-3, accounting for ～26 and 12% of PM_2.5 concentration, respectively. The species studied accounted for 84% of PM_2.5 concentration, ranging from 76% in winter to 97% in summer.

Potential source contribution function (PSCF) analysis was used to identify possible source areas affecting air pollution levels at a receptor site in Seoul. High possible source areas in concentrations of PM_2.5, NO₃ ^?, SO₄ ^2?, NH₄ ⁺, and K⁺ were coastal cities of Liaoning province (possibly emissions from oil-fired boilers on ocean liners and fishing vessels and industrial emissions), inland areas of Heibei/Shandong provinces (the highest density areas of agricultural production and population) in China, and typical port cities (Mokpo, Yeosu, and Busan) of South Korea. In the PSCF map for OC, high possible source areas were also coastal cities of Liaoning province and inland areas of Heibei/Shandong provinces in China. In contrast, high possible source areas of EC were highlighted in the south of the Yellow Sea, indicating possible emissions from oil-fired boilers on large ships between South Korea and Southeast Asia. In summary, the PSCF results may suggest that air pollution levels in Seoul are affected considerably by long-range transport from external areas, such as the coastal zone in China and other cities in South Korea, as well as Seoul itself.     

Feasibility of coupling a thermal/optical carbon analyzer to a quadrupole mass spectrometer for enhanced PM2.5 speciation

A thermal/optical carbon analyzer (TOA), normally used for quantification of organic carbon (OC) and elemental carbon (EC) in PM_2.5 (fine particulate matter) speciation networks, was adapted to direct thermally evolved gases to an electron impact quadrupole mass spectrometer (QMS), creating a TOA-QMS. This approach produces spectra similar to those obtained by the Aerodyne aerosol mass spectrometer (AMS), but the ratios of the mass to charge (m/z) signals differ and must be remeasured using laboratory-generated standards. Linear relationships are found between TOA-QMS signals and ammonium (NH₄⁺), nitrate (NO₃^?), and sulfate (SO₄^2-) standards. For ambient samples, however, positive deviations are found for SO₄^2-, compensated by negative deviations for NO₃^?, at higher concentrations. This indicates the utility of mixed-compound standards for calibration or separate calibration curves for low and high ion concentrations. The sum of the QMS signals across all m/z after removal of the NH₄⁺, NO₃^?, and SO₄^2- signals was highly correlated with the carbon content of oxalic acid (C?H?O?) standards. For ambient samples, the OC derived from the TOA-QMS method was the same as the OC derived from the standard IMPROVE_A TOA method. This method has the potential to reduce complexity and costs for speciation networks, especially for highly polluted urban areas such as those in Asia and Africa.

Implications: Ammonium, nitrate, and sulfate can be quantified by the same thermal evolution analysis applied to organic and elemental carbon. This holds the potential to replace multiple parallel filter samples and separate laboratory analyses with a single filter and a single analysis to account for a large portion of the PM_2.5 mass concentration.     

Spatial and seasonal variations of elemental and ion components in air particulate matters in three mega-cities in China

Beijing–Tianjin–Hebei region is one of the most important political, economic and cultural centers of China. The rapid development of economy in last decades has caused severe air pollution problems, which has resulted in considerable harm to local ecological environment and human health. In this study, total 671 air samples were collected from Beijing, Tianjin and Shijiazhuang (the capital city in Hebei province), one reference site and four background sites in four seasons. Particulate matters (PMs) with different sizes, elements and dissolvable ions in PMs were analyzed. Pollutant concentrations, characteristics and seasonal variations were discussed in order to describe the pollution status and the possible sources in this region. Enriched factors of K, Ca, Cr, Fe, Cu, Zn, As, Cd and Pb were all higher than 10. Concentrations of dissolvable ions were in the order of NO₃^–, SO₄^2–>NH₄⁺>Cl^–>Ca²⁺, K⁺, Na⁺>Mg²⁺, F^–. NO₃^–, SO₄^2–, NH₄⁺, Cl^– were the most important ion pollutants in the three cities which accounted for 90.3–92.3% of total 9 ion concentrations. Ion concentrations in the PMs were in the order of PM₁>PM_1–2.5>PM_2.5–10>PM₁₀>TSP. More than 50% of the dissolvable ions exist in PM1 and the percentage increases to 73.9–94.8% in PM_2.5. Human activities should be the main sources of the metallic pollutants, among which coal combustion was identified as the primary one.     

Seasonal variations of acidic air pollutants in Seoul,South Korea

The annular denuder system (ADS) was used to characterize seasonal variations of acidic air pollutants in Seoul, South Korea. Fifty- four 24 h samples were collected over four seasons from October 1996 to September 1997. The annual mean concentrations of HNO₃, HNO₂, SO₂ and NH₃ in the gas phase were 1.09, 4.51, 17.3 and 4.34 μg m^-3, respectively. The annual mean concentrations of PM_2.5(d_p≤2.5 μm in aerodynamic diameter, 50% cutoff), SO^2-₄, NO^-₃ and NH⁺₄ in the particulate phase were 56.9, 8.70, 5.97 and 4.19 μg m^-3, respectively. All chemical species monitored from this study showed statistical seasonal variations. Nitric acid (HNO₃) and ammonia (NH₃) exhibited substantially higher concentrations during the summer, while nitrous acid (HNO₂) and sulfur dioxide(SO₂) were higher during the winter. Concentrations of PM_2.5, SO^2-₄, NO^-₃ and NH⁺₄ in the particulate phase were higher during the winter months. SO^2-₄, NO^-₃ and NH⁺₄ accounted for 26–38% of PM_2.5. High correlations were found among PM_2.5, SO^2-₄, NO^-₃ and NH⁺₄. The mean H⁺ concentration measured only in the fall was 5.19 nmole m^-3.     

Regional Transport and Urban Contributions to Fine Particle Concentrations in Southeastern Canada

Abstract

The impact of various atmospheric transport directions on ambient fine particle (PM_2.5) concentrations at several sites in southeastern Canada was estimated (for May-September) using back-trajectory analysis. Three-day back trajectories (four per day) were paired with 6-hr average PM_2.5 mass concentrations measured using tapered element oscillating microbalances (TEOM). PM_2.5 concentrations at rural locations in the region were affected by nonlocal sources originating in both Canada and the United States. Comparison of sites revealed that, on average, the local contribution to total PM_2.5 in the greater Toronto area (GTA) is approximately 30–35%. At each location, average PM_2.5 concentrations under south/southwesterly flow conditions were 2–4 times higher than under the corresponding northerly flow conditions. The chemical composition of both urban and rural PM_2.5 was determined during two separate 2-week spring/summer measurement campaigns. Components identified included SO₄ ^2?, NO₃ ^?, NH₄+, black carbon and organic carbon (OC), and trace elements. Higher particle mass at the urban Toronto site was composed of a higher proportion of all components. However, black carbon, NO₃ ^?, NaCl, and trace elements were found to be the most enriched over the rural/regional background levels.     

PM2.5–10, PM2.5 and associated water-soluble inorganic species at a coastal urban site in the metropolitan region of Rio de Janeiro

The concentrations of PM_2.5−10, PM_2.5 and associated water-soluble inorganic species (WSIS) were determined in a coastal site of the metropolitan region of Rio de Janeiro, Southeastern Brazil, from October 1998 to September 1999 (n=50). Samples were dissolved in water and analyzed for major inorganic ions. The mean (± standard deviation; median) concentrations of PM_2.5−10 and PM_2.5 were, respectively, 26 (± 16; 21) μg m⁻³ and 17 (± 13; 14) μg m⁻³. Their mean concentrations were 1.7–1.8 times higher in dry season (May–October) than in rainy season (November–April). The WSIS comprised, respectively, 34% and 28% of the PM_2.5−10 and PM_2.5 masses. Chloride, Na⁺ and Mg²⁺ were the predominant ions in PM_2.5−10, indicating a significant influence of sea-salt aerosols. In PM_2.5, SO₄²⁻ (∼97% nss-SO₄²⁻) and NH₄⁺ were the most abundant ions and their equivalent concentration ratio (SO₄²⁻/NH₄⁺ ∼1.0) suggests that they were present as (NH₄)₂SO₄ particles. The mean concentration of (NH₄)₂SO₄ was 3.4 μg m⁻³. The mean equivalent PM_2.5 NO₃⁻ concentration was eight times smaller than those of SO₄²⁻ and NH₄⁺. The PM_2.5 NO₃⁻ concentration in dry season was three times higher than in rainy season, probably due to reaction of NaCl (sea salt) with HNO₃ as a result of higher levels of NO_y during the dry season and/or reduced volatilization of NH₄NO₃ due to lower wintertime temperature. Chloride depletion was observed in both size ranges, although more pronouncely in PM_2.5.     

Effect of PM2.5 chemical constituents on atmospheric visibility impairment

PM_2.5 sampling was conducted at a curbside location in Delhi city for summer and winter seasons, to evaluate the effect of PM_2.5 and its chemical components on the visibility impairment. The PM_2.5 concentrations were observed to be higher than the National Ambient Air Quality Standards (NAAQS), indicating poor air quality. The chemical constituents of PM_2.5 (the water-soluble ionic species SO₄^2-, NO₃^?, Cl^?, and NH₄⁺, and carbonaceous species: organic carbon, elemental carbon) were analyzed to study their impact on visibility impairment by reconstructing the light extinction coefficient, b_ext. The visibility was found to be negatively correlated with PM_2.5 and its components. The reconstructed b_ext showed that organic matter was the largest contributor to b_ext in both the seasons which may be attributed to combustion sources. In summer season, it was followed by elemental carbon and ammonium sulfate; however, in winter, major contributions were from ammonium nitrate and elemental carbon. Higher elemental carbon in both seasons may be attributed to traffic sources, while lower concentrations of nitrate during summer, may be attributed to volatility because of higher atmospheric temperatures.

Implications: The chemical constituents of PM_2.5 that majorly effect the visibility impairment are organic matter and elemental carbon, both of which are products of combustion processes. Secondary formations that lead to ammonium sulfate and ammonium nitrate production also impair the visibility.     

Assessing the Relationship between Personal Particulate and Gaseous Exposures of Senior Citizens Living in Baltimore,MD

ABSTRACT

We conducted a multi-pollutant exposure study in Baltimore, MD, in which 15 non-smoking older adult subjects (>64 years old) wore a multi-pollutant sampler for 12 days during the summer of 1998 and the winter of 1999. The sampler measured simultaneous 24-hr integrated personal exposures to PM₂₅, PM₁₀, SO₄ ^2-, O₃, NO₂, SO₂, and exhaust-related VOCs.

Results of this study showed that longitudinal associations between ambient PM_2.5 concentrations and corresponding personal exposures tended to be high in the summer (median Spearman's r = 0.74) and low in the winter (median Spearman's r = 0.25). Indoor ventilation was an important determinant of personal PM_2.5 exposures and resulting personal-ambient associations. Associations between personal PM₂₅ exposures and corresponding ambient concentrations were strongest for well-ventilated indoor environments and decreased with ventilation. This decrease was attributed to the increasing influence of indoor PM_{2 5} sources. Evidence for this was provided by SO₄ ^2-measurements, which can be thought of as a tracer for ambient PM₂₅. For SO₄ ^2-, personal-ambient associations were strong even in poorly ventilated indoor environments, suggesting that personal exposures to PM_2.5 of ambient origin are strongly associated with corresponding ambient concentrations. The results also indicated that the contribution of indoor PM_2.5 sources to personal PM_2.5 exposures was lowest when individuals spent the majority of their time in well-ventilated indoor environments.

Results also indicate that the potential for confounding by PM_2.5 co-pollutants is limited, despite significant correlations among ambient pollutant concentrations. In contrast to ambient concentrations, PM_2.5 exposures were not significantly correlated with personal exposures to PM_2.5-10, PM_2.5 of non-ambient origin, O₃, NO₂, and SO₂. Since a confounder must be associated with the exposure of interest, these results provide evidence that the effects observed in the PM_2.5 epidemiologic studies are unlikely to be due to confounding by the PM_2.5 co-pollutants measured in this study.     

The use of real-time monitoring data to evaluate major sources of airborne particulate matter

Real-time chemical measurements have been made as part of a field study of air quality in the city and harbour of Cork, Ireland. The data relate to the year 2008, with particular attention paid to the period between May and August. Eight air quality parameters were measured: NO, O₃, NO₂, SO₂, EC, OC, particulate SO₄^2? and PM_2.5. The data have been used in a novel way involving wind and temporal averaging, along with Principal Component Analysis (PCA) and Positive Matrix Factorisation (PMF) methodologies to extrapolate major source contributions for PM_2.5. It is demonstrated that continuous monitoring of standard air quality parameters, such as NO, NO₂, SO₂, along with EC, OC and particulate SO₄^2?, can be used to provide relevant, cost-effective initial estimates of source contributions to ambient PM_2.5 levels. It is also shown that the benefit of including OC and particulate SO₄^2? in the monitoring protocol is considerable. Three major source groups of ambient PM_2.5 mass in Cork were identified and quantified using this combined monitoring and modelling approach; road transport (19%), domestic solid fuel burning (14%) and oil-fired domestic and industrial boilers, including power generation plants (31%).