投菌水解（酸化）—生物接触氧化—混凝法处理酵母生产废水

研究了采用投菌水解（酸化）－生物接触氧化－浊凝化处理酵母生产废水。试验结果表明，进水浓度控制在ＣＯＤＣｒ值５０００ｍｇ／Ｌ左右，生化系统可取得较高的处理效率；生经处理出水再以碱式 化铝为混凝剂，聚丙烯酰胺为助凝剂进行混凝处理，其出水ＣＯＤＣｒ值可控制在２００ｍｇ／Ｌ以下，并且可部分回流使用。     

探讨电镀项目环境影响评价分析中的要点

本文就对电镀行业环评中需要注意的重点问题分析,探讨了当前政策的主要要求,这类的电镀项目在运作经营的期间是否会影响主要环境以及其排放标准有什么要求,在环境影响评价后要注意在运营期注意怎样的问题等.     

Desertification and Sustainable Development of the Heihe River Basin in Arid Northwestern China

The Heihe River Basin of northwestern China is one of several areas severely affected by desertification. This article outlines the status of desertification in this basin. There are mainly 5 types of desertification in the Heihe River Basin, namely soil and water erosion, sandy desertification, soil aridization, soil salinization and vegetation degradation. Among the 5 types of desertification, the main desertification type is sandy desertification with an area of 10 771.97 km2; Second type is soil salinization with an area of 10 591.82 km2; Next to the soil salinization is the type of soil and water erosion with an area of 5 747.68 km2 and the other types of desertification in the Heihe River Basin are soil aridization with just area of 1 369.96 km2 and vegetation degradation type with an area of 1 490.48 km2 respectively. Both natural and man-made factors are responsible for the causes of desertification development, among which the latter is the main driving force for desertification in the basin.     

Technology development and cost analysis of multiple pollutant abatement for ultra-low emission coal-fired power plants in China

The implementation of ultra-low emission (ULE) limits (SO₂: 35 mg/m³, NOx: 50 mg/m³, PM: 10 mg/m³) promoted the development of flue gas treatment technologies in China. Pollutant control technology development for Chinese coal-fired power plants was summarized and an analysis of the applicability and cost of pollutant control technologies was conducted. Detailed data were collected from 30 ultra-low emission coal-fired units across China. Based on a cost analysis model, the average unit power generation incremental costs were 0.0144 and 0.0095 CNY/(kW·hr) for SO₂ and NOx control technologies, respectively. The unit power generation incremental cost of twin spray tower technology was 7.2% higher than that of dual-loop spray tower technology. The effect of key parameters on operating cost was analyzed. The unit power generation incremental cost increased because of increments in the electricity price for SO₂ control technology and the price of the reductant in NOx control technology. With high sulfur content or NOx concentration, the unit power generation incremental cost caused by pollutant control increased, whereas the unit pollutant abatement cost decreased. However, the annual operating hours or load increased, thereby leading to a decline in unit power generation incremental cost and unit pollutant abatement cost.     

Synthesis of a novel ternary HA/Fe-Mn oxides-loaded biochar composite and its application in cadmium(Ⅱ) and arsenic(Ⅴ) adsorption

Cadmium(Cd) and arsenic(As) are two of the most toxic elements. However, the chemical behaviors of these two elements are different, making it challenging to utilize a single adsorbent with high adsorption capacity for both Cd(Ⅱ) and As(Ⅴ) removal. To solve this problem, we synthesized HA/Fe-Mn oxides-loaded biochar(HFMB), a novel ternary material,to perform this task, wherein scanning electron microscopy(SEM) combined with EDS(SEMEDS) was used to characterize its morphological and physicochemical properties. The maximum adsorption capacity of HFMB was 67.11 mg/g for Cd(Ⅱ) and 35.59 mg/g for As(Ⅴ),which is much higher compared to pristine biochar(11.06 mg/g, 0 mg/g for Cd(Ⅱ) and As(Ⅴ),respectively). The adsorption characteristics were investigated by adsorption kinetics and the effects of the ionic strength and pH of solutions. X-ray photoelectron spectroscopy(XPS)and Fourier-transform infrared spectroscopy(FT-IR) revealed that chelation and deposition were the adsorption mechanisms that bound Cd(Ⅱ) to HFMB, while ligand exchange was the adsorption mechanism that bound As(Ⅴ).     

Chromosome doubling of Sedum alfredii Hance: A novel approach for improving phytoremediation efficiency

Sedum alfredii Hance is a cadmium(Cd)/zinc(Zn) hyperaccumulator native to China.However, its relatively low biomass restricted the large-scale application for heavy metal contamination remediation. The chromosome set doubling of S. alfredii in vitro was achieved by 0.1%–0.2%(W/V) colchicine treatment. The plant DNA ploidy was analyzed by flow cytometry and chromosome set doubling plants(CSD) were identified based on the obvious different sharp peak. A tissue culture experiment with different Cd treated levels and a field trial with natural polluted mined soil were conducted to study the effects of chromosome doubling on plant biomass and Cd accumulation in shoots. The results suggested that S.alfredii is a mixoploid. Compared with the wild type plants(WT), CSD exhibited typical"gigas" characteristics in morphology including stem thickness, root hair production,number of leaves and size of stoma guard cell. Fresh weight and dry weight of CSD were increased to 1.62–2.03-fold and 2.26–3.25-fold of WT. And Cd content of CSD showed a17.49%–42.82% increase and 59% increase under tissue culture and field condition,accordingly. In addition, the TF and in BCF of CSD were 2.37-and 1.59-fold of WT,respectively. These results proved that it is feasible to promote phytoextraction efficiency of S. alfredii in Cd contaminated soils through chromosomal engineering, which provides a novel approach for hyperaccumulator application in phytoremediation.     

从实现安全生产谈加强运行班组安全建设的重要性

分析了近年来因运行班组人员操作不当引发事故的原因,主要归结于日常安全管理工作和应急处置不当。提出在日常安全管理方面,操作人员须熟知岗位风险、防止“三违行为”和做好装置开停工期间的安全管理;在应急处置方面,需熟练掌握应急操作技能,培养反应快速、清晰的应急意识等措施,不断提高班组安全能力建设,以便更有效地控制安全风险,实现安全生产。     

Study on the role of copper converter slag in simultaneously removing SO2 and NOx using KMnO4/copper converter slag slurry

To achieve “waste controlled by waste”, a novel wet process using KMnO4/copper converter slag slurry for simultaneously removing SO2 and NOx from acid-making tail gas was proposed. Through the solid-liquid separation for copper slag slurry, the liquid-phase part has a critical influence on removing NOx and SO2. Also, the leached metal ions played a crucial role in the absorption of SO2 and NOx. Subsequently, the effects of single/multi-metal ions on NOx removal was investigated. The results showed that the leached metal from copper converter slag (Al3+, Cu2+, and Mg2+) and KMnO4 had a synergistic effect on NOx removal, thereby improving the NOx removal efficiency. Whereas Fe2+ had an inhibitory effect on the NOx removal owing to the reaction between Fe2+ and KMnO4, thereby consuming the KMnO4. Besides, SO2 was converted to SO42? completely partly due to the liquid catalytic oxidation by metal ions. The XRD and XPS results indicated that the Fe (II) species (Fe2SiO4, Fe3O4) in copper slag can react with H+ ions with the generation of Fe2+, and further consumed the KMnO4, thereby resulting in a decrease in the NOx removal. The characterization of the slags and solutions before and after reaction led us to propose the possible mechanisms. The role of copper slag is as follows: (1) the alkaline substances in copper slag can absorb SO2 and NO2 by KMnO4 oxidation. (2) copper slag may function as a catalyst to accelerate SO2 conversion and improve NOx removal by synergistic effect between leached metal ions and KMnO4.     

Emission source-based ozone isopleth and isosurface diagrams and their significance in ozone pollution control strategies

In the past decade, ozone (O₃) pollution has been continuously worsening in most developing countries. The accurate identification of the nonlinear relationship between O₃ and its precursors is a prerequisite for formulating effective O₃ control measures. At present, precursor-based O₃ isopleth diagrams are widely used to infer O₃ control strategy at a particular location. However, there is frequently a large gap between the O₃-precursor nonlinearity delineated by the O₃ isopleths and the emission source control measures to reduce O₃ levels. Consequently, we developed an emission source-based O₃ isopleth diagram that directly illustrates the O₃ level changes in response to synergistic control on two types of emission sources using a validated numerical modeling system and the latest regional emission inventory. Isopleths can be further upgraded to isosurfaces when co-control on three types of emission sources is investigated. Using Guangzhou and Foshan as examples, we demonstrate that similar precursor-based O₃ isopleths can be associated with significantly different emission source co-control strategies. In Guangzhou, controlling solvent use emissions was the most effective approach to reduce peak O₃ levels. In Foshan, co-control of on-road mobile, solvent use, and fixed combustion sources with a ratio of 3:1:2 or 3:1:3 was best to effectively reduce the peak O₃ levels below 145 ppbv. This study underscores the importance of using emission source-based O₃ isopleths and isosurface diagrams to guide a precursor emission control strategy that can effectively reduce the peak O₃ levels in a particular area.