Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

Estimating the variance in before-after studies

Problem

To simplify the computation of the variance in before-after studies, it is generally assumed that the observed crash data for each entity (or observation) are Poisson distributed. Given the characteristics of this distribution, the observed value (x_i) for each entity is implicitly made equal to its variance. However, the variance should be estimated using the conditional properties of this observed value (defined as a random variable), that is, f(x_i|μ_i), since the mean of the observed value is in fact unknown.

Method

Parametric and non-parametric bootstrap methods were investigated to evaluate the conditional assumption using simulated and observed data.

Results

The results of this study show that observed data should not be used as a substitute for the variance, even if the entities are assumed to be Poisson distributed. Consequently, the estimated variance for the parameters under study in traditional before-after studies is likely to be underestimated.

Conclusions

The proposed methods offer more accurate approaches for estimating the variance in before-after studies.     

张店区水泥行业发展策略

调查发现，张店区水泥行业整体经营粗放，资源、能源消耗高，综合利用水平低，生产能力落后，其生产对环境造成了严重的粉尘、废气和噪声污染。基于此基本情况，根据水泥行业产业政策，建议张店区水泥行业进行工艺创新、材料创新，完善水泥产业链，环保部门要加大监察力度。     

高铁酸钾预处理对活性污泥脱水性能的影响

通过投入不同剂量的高铁酸钾于剩余活性污泥中,研究其对污泥絮体性质和脱水性能的影响作用。污泥絮体性质的研究包括絮体粒径的变化以及污泥EPS含量的变化。脱水性能的研究包括过滤脱水性能(以CST表征)以及脱水程度(离心泥饼含固率)。实验结果表明,高铁酸钾的强氧化性可以破坏污泥絮体结构,提高污泥的机械脱水程度;但同时污泥EPS含量增加,对污泥过滤脱水性能有负面影响。高铁酸钾氧化分解生成的Fe(OH)3具有絮凝能力,可以使污泥颗粒重新絮凝;而其混凝作用可以破坏污泥细胞的稳定性,提高污泥的沉降性能。     

膜吸收法净化低浓度甲醛和氨气简

基于膜吸收技术自制双层平板式膜吸收器，搭建净化低浓度甲醛和氨气污染模拟系统，考察不同膜结构参数、进气流量、吸收剂流量等因素对其净化效果的影响。结果表明，聚偏氟乙烯PVDF对低浓度甲醛和氨气的净化效率高于聚四氟乙烯PTFE。对同一材质膜，随着膜孔隙率的增大，甲醛和氨气的净化率呈上升趋势。随着进气流量的增加，甲醛和氨气的净化效率降低；而吸收剂流量对其净化效率影响不大。对于所有实验条件，平均膜孔径为0.22 μm的PVDF 4^#在进气流量u_g=120 L/h时，甲醛和氨气的净化效率最高，分别达94.7%和96.3%。     

用含固定化微生物的曝气生物滤池处理炼油厂高浓度废水

采用含固定化微生物的曝气生物滤池(G-BAF)处理炼油厂高浓度废水。当G-BAF池进水COD为298～11 278 mg/L时,出水COD为33.0～94.3 mg/L,COD平均去除率为97%;当G-BAF池进水ρ(NH_3-N)为12.1～188.0 mg/L时,出水ρ(NH_3-N)为0.9～49.4 mg/L,NH_3-N平均去除率为83%。经G-BAF处理后出水水质完全达到GB8978—1996《污水综合排放标准》第二类污染物的二级排放标准。     

Enantioselectivity in environmental risk assessment of modern chiral pesticides

Chiral pesticides comprise a new and important class of environmental pollutants nowadays. With the development of industry, more and more chiral pesticides will be introduced into the market. But their enantioselective ecotoxicology is not clear. Currently used synthetic pyrethroids, organophosphates, acylanilides, phenoxypropanoic acids and imidazolinones often behave enantioselectively in agriculture use and they always pose unpredictable enantioselective ecological risks on non-target organisms or human. It is necessary to explore the enantioselective toxicology and ecological fate of these chiral pesticides in environmental risk assessment. The enantioselective toxicology and the fate of these currently widely used pesticides have been discussed in this review article.     

湖北“人口-经济-空间”城市化及其层级结构

城市化的内在协调性是城市（区域乃至国家）综合竞争力、国民生计及可持续发展能力的综合体现。基于对城市化概念与内涵的认知--城市化是一个“人口 经济 空间”三维一体的过程，其中人是行为主体，经济是驱动力，空间是载体，构建了城市化综合测度指标，并运用时序全局主成分分析法，对2000年以来湖北省12个地级市的城市化层级结构演变过程及趋势进行了分析。结果表明湖北省城市化具有如下特征：① 城市化总量时序演变上呈现出明显的上升趋势，且存在经济城市化>空间城市化>综合城市化>人口城市化的变化趋势，但也表现出一定程度的粗放增长的内在特征；② 整个城市化过程是一个由人口城市化导向型向经济城市化导向型转变的过程；③ 城市化相关系数的时序演变与人口城市化集聚程度>空间城市化集聚程度>经济城市化集聚程度的演变趋势密切相关，表明综合城市化与人口城市化的地域协调性最高，而与经济的最低；④ 城市化等级体系空间结构及其时序演变具有首位度城市层级结构、城市层级结构动态演变，以及城市化地域协调性不强等特征；最后就城市化的协调发展提出对策和建议。为我国城市化可持续发展研究以及湖北省今后的城市化发展战略提供了理论借鉴和实践指导     

改性活性炭对水中铬离子(Ⅵ)的吸附性能

为了研究改性前后活性炭对水中铬离子(Ⅵ)的吸附效果,以磷酸活性炭(PAC)为原料,用10%硝酸改性得到硝酸改性活性炭(N-PAC)及直接蒸发法载铁改性得到载铁活性炭(Fe-PAC)。通过静态吸附研究表明,改性后活性炭对Cr(Ⅵ)的吸附率有较大提高。在常温、自然pH条件下,0.2 g活性炭处理50 mL浓度为100 mg/L的含Cr(Ⅵ)溶液,N-PAC和Fe-PAC对Cr(Ⅵ)的吸附率分别为79.21%和90.59%,都高于原PAC对Cr(Ⅵ)的吸附率49.58%。pH从2.2升高到11.92,Fe-PAC对Cr(Ⅵ)的吸附率从99.86%降低到14.77%,N-PAC则从99.86%降低到3.23%,PAC从97.05%降低到2.53%。温度从25℃升高到70℃,3种活性炭对Cr(Ⅵ)吸附率都有较大提高,都增加到98%以上。且吸附过程较符合Langmuir等温吸附模型。     

高铝粉煤灰提取氧化铝后硅钙渣用作水泥混合材

为了使高铝粉煤灰提取氧化铝后所产生的硅钙渣被大量的用作水泥混合材,通过水泥强度、水化放热和干缩性实验研究了原状硅钙渣和脱碱硅钙渣对水泥强度和稳定性的影响。结果表明,当硅钙渣掺量达30%时,硅钙渣水泥强度仍可满足P·C 32.5水泥要求。且随硅钙渣掺入量的增加,水泥早期水化放热速率增加的同时水泥累计水化放热量和干缩率还会显著降低。与原状硅钙渣相比,在同等掺量的情况下,脱碱硅钙渣更有利于保持水泥强度,降低其水化热和改善干缩性。