Total mercury loadings in sediment from gold mining and conservation areas in Guyana

The Low Carbon Development Strategy proposed in June 2009 by the government of Guyana in response to the Reducing Emissions from Deforestation and Forest Degradation in Developing Countries program has triggered evaluation of forest-related activities, thereby acting as a catalyst for improvements in Guyana's small- to medium-scale gold mining industry. This has also shed light on areas committed to conservation, something that has also been handled by Non Governmental Organizations. This paper compares water quality and mercury concentrations in sediment from four main areas in Guyana, two that are heavily mined for gold using mercury amalgamation methods (Arakaka and Mahdia) and two that are considered conservation areas (Iwokrama and Konashen). Fifty-three sediment and soil mercury loadings ranged from 29 to 1,200 ng/g and averaged 215 ± 187 ng/g for all sites with similar averages in conservation and mining areas. Sediment loadings are within the range seen in French Guiana and Suriname, but conservation area samples had higher loadings than the corresponding uncontaminated baselines. Type of ore and location in the mining process seemed to influence mercury loadings. Mercury sediment loadings were slightly positively correlated with pH (correlation coefficient = 0.2; p value < 0.001) whereas no significant correlations were found with dissolved oxygen or turbidity.     

The potential protective role of apigenin against oxidative damage induced by nickel oxide nanoparticles in liver and kidney of male Wistar rat,Rattus norvegicus

Environmental Science and Pollution Research - Nickel oxide nanoparticles (NiONPs) are involved in several applications but still have some adverse effects. Apigenin (APG) is a widespread natural...     

Experimental selection of Marylynnia puncticaudata (Cyatholaimidae,Nematoda) and effects of organic enrichment

Environmental Science and Pollution Research - Meiobenthic nematodes are well-known bioindicators in aquatic ecosystem health programs. However, the explored taxa are still limited and practically...     

Prenatal diagnosis in a family with X-linked hydrocephalus

The neural cell adhesion molecule L1 is a transmembrane glycoprotein belonging to the immunoglobulin superfamily of cell adhesion molecules (CAMs). Its expression is essential during embryonic development of the nervous system and it is involved in cognitive function and memory. Mutations in the L1CAM gene are responsible for four related L1 disorders; X-linked hydrocephalus/HSAS (H ydrocephalus as a result of S tenosis of the A queduct of S ylvius), MASA (M ental retardation, A phasia, S huffling gait, and A dducted thumbs) syndrome, X-linked complicated spastic paraplegia type I (SPG1) and X-linked A genesis of the C orpus C allosum (ACC). These four disorders represent a clinical spectrum that varies both between and within families. The main clinical features of this spectrum are C orpus callosum hypoplasia, mental R etardation, A dducted thumbs, S pastic paraplegia and H ydrocephalus (CRASH syndrome). Since there is no biochemically assayed disease marker, molecular analysis of the L1CAM gene is the only means of confirming a clinical diagnosis. Most L1CAM mutations reported to date are point mutations (missense, nonsense, splice site) and only a few patients with larger rearrangements have been documented. We have characterised a rare intragenic deletion of the L1CAM gene in a sample of DNA extracted from a chorionic villus biopsy (CVB) performed at 12 weeks' gestation. Copyright © 2005 John Wiley & Sons, Ltd.     

Male dimorphism, sperm traits and immunology in the corkwing wrasse (Symphodus melops L.)

The evolution of alternative male mating phenotypes inevitably involves variation in risk or intensity of sperm competition. Males that typically mate in disfavoured roles (i.e. sneakers/parasitic males) are predicted to experience higher magnitudes of sperm competition than males mating in favoured roles (preferred by females/exhibiting mate monopolisation). Here, we investigated whether two distinct male phenotypes in corkwing wrasse (Symphodus melops) differ with respect to adaptations for sperm competition in terms of sperm quantity, sperm motility and fertilising capacity. We found that males exhibiting female mimicry (disfavoured role) had both absolutely and relatively larger gonads than males with typical secondary sexual characters (favoured role). Moreover, a higher proportion of sperm from female mimics was motile 5 min after activation compared to sperm of territorial males. There were, however, no differences in sperm concentration or in in vitro fertilisation ability between the two male morphs. We also examined whether the male phenotypes differed in some immune parameters and if any such variation is associated with sperm traits. Current theories predict that ejaculate quality should be negatively correlated with the level of immunocompetence. Territorial males had relatively heavier spleens than female mimics, but whether this reflects differing immunocompetence is uncertain, since the spleen is also an important organ for erythrocyte storage. Furthermore, there were no differences in the densities of circulating lymphocytes or granulocytes, and the immune parameters did not covary with the sperm traits. Differences in immunocompetence are therefore unlikely to provide a major proximate explanation for variations in sperm traits in corkwing wrasse.     

Temporal variations of fine and coarse particulate matter sources in Jeddah,Saudi Arabia

This study provides the first comprehensive analysis of the seasonal variations and weekday/weekend differences in fine (aerodynamic diameter <2.5 μm; PM_2.5) and coarse (aerodynamic diameter 2.5–10 μm; PM_2.5–10) particulate matter mass concentrations, elemental constituents, and potential source origins in Jeddah, Saudi Arabia. Air quality samples were collected over 1 yr, from June 2011 to May 2012 at a frequency of three times per week, and analyzed. The average mass concentrations of PM_2.5 (21.9 μg/m³) and PM₁₀ (107.8 μg/m³) during the sampling period exceeded the recommended annual average levels by the World Health Organization (WHO) for PM_2.5 (10 μg/m³) and PM₁₀ (20 μg/m³), respectively. Similar to other Middle Eastern locales, PM_2.5–10 is the prevailing mass component of atmospheric particulate matter at Jeddah, accounting for approximately 80% of the PM₁₀ mass. Considerations of enrichment factors, absolute principal component analysis (APCA), concentration roses, and backward trajectories identified the following source categories for both PM_2.5 and PM_2.5–10: (1) soil/road dust, (2) incineration, and (3) traffic; and for PM_2.5 only, (4) residual oil burning. Soil/road dust accounted for a major portion of both the PM_2.5 (27%) and PM_2.5–10 (77%) mass, and the largest source contributor for PM_2.5 was from residual oil burning (63%). Temporal variations of PM_2.5–10 and PM_2.5 were observed, with the elevated concentration levels observed for mass during the spring (due to increased dust storm frequency) and on weekdays (due to increased traffic). The predominant role of windblown soil and road dust in both the PM_2.5 and PM_2.5–10 masses in this city may have implications regarding the toxicity of these particles versus those in the Western world where most PM health assessments have been made in the past. These results support the need for region-specific epidemiological investigations to be conducted and considered in future PM standard setting.

Implications: Temporal variations of fine and coarse PM mass, elemental constituents, and sources were examined in Jeddah, Saudi Arabia, for the first time. The main source of PM_2.5–10 is natural windblown soil and road dust, whereas the predominant source of PM_2.5 is residual oil burning, generated from the port and oil refinery located west of the air sampler, suggesting that targeted emission controls could significantly improve the air quality in the city. The compositional differences point to a need for health effect studies to be conducted in this region, so as to directly assess the applicability of the existing guidelines to the Middle East air pollution.     

Photocatalytic oxidation of the textile dye basic red 18 with irradiated titanium dioxide

One of the major problems of textile wastewater is the presence of dye materials, because colour is visible to the public even if the dye concentration is lower than other pollutants, and needs therefore to be removed from the wastewater before it is discharged. Techniques based on “advanced oxidative processes” such as photocatalysed oxidation seem to be very promising for industrial wastewater treatment, especially for decolourization of textile effluents. In this work, we describe the photocatalytic degradation of the textile dye Basic Red 18 (BR 18) in aqueous solution using two different types of TiO₂ as photocatalyst: Degussa P25 (80% anatase) and Framitalia (100% anatase). Photooxidation of BR 18 was followed by HPLC analysis, and kinetic parameters were evaluated in order to optimise the treatment procedure. The results obtained in this work showed that the colour became virtually zero and the chemical oxygen demand (COD) is strongly reduced at the end of the treatment. The obtained results are compared with the efficiency of decolourization using the H₂O₂/UV System. Finally, marine mussel test was used to evaluate the efficiency of photocatalytic oxidation with TiO₂ in terms of ecotoxicity. A significant reduction of cumulative mortality was observed for the treated effluent.     

A cascaded fuzzy-LOPA risk assessment model applied in natural gas industry

Natural gas plants demand high amount of energy provided through immense fuel gas units that may suffer risk hazards. Implementing a safety management system is the most efficient way of allocating resources for safety. This paper adopts The Layer of Protection Analysis (LOPA) risk Management associated with Fuzzy Logic methodology to prevent or limit industrial accidents. We provide an innovative cascaded fuzzy-LOPA model for certain hazardous scenarios and at different frequencies of occurrence. The introduced model is tested at moderate and high risk levels controlled in its practical limits through the use of Safety Integrity Functions (SIF). Obtained results show how this fuzzy-LOPA achieves better results to maintain the Safety Integrity Level (SIL) rating to acceptable limits.     

A Parallel Computation Tool to Enable Dynamic Sensitivity and Model Performance Analysis of APEX: Evapotranspiration Modeling

Global sensitivity analysis can be used for assessing the relative importance of model parameters on model outputs. The sensitivity of parameters usually indicates a temporal variation due to variation in the environmental conditions (e.g., variation in weather or plant growth). In addition, the size of averaging window by which the outputs of a model are aggregated or averaged may impact parameter sensitivities. In this study, temporal variation of parameters sensitives, model performance, as well as the impact of the size of time‐averaging window on evapotranspiration (ET) prediction using the Agricultural Policy/Environmental eXtender (APEX) model are investigated. To achieve these goals, an open‐source package named PARAPEX was developed in R and used to perform dynamic sensitivity and model performance analysis of APEX using parallel computation. PARAPEX reduced the computation time from 5,939 to 379 s (using 20 and 1 computation nodes, respectively). The sensitivity analysis results indicated the parameters accounting for the reducing effect of plant cover on evaporation from the soil surface, the effect of soil on the plant root growth, and the effect of cycling and transformation dynamics of organic matter at the top soil layer as the top sensitive parameters based on the mean daily simulated ET and the Nash–Sutcliffe model performance measure. The dynamic performance analysis indicated poor ET predictions by APEX during the growing seasons. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.