东北三省畜禽养殖类固醇激素排放及其潜在污染风险

以东北三省畜禽养殖数量统计数据和养殖结构分析为基础,对黑龙江、吉林和辽宁省畜禽养殖类固醇激素排放量进行了估算,并初步探讨了畜禽粪便中类固醇激素对当地水体的潜在污染风险.结果表明,由于养殖数量的增加,东北三省畜禽粪便所排放的类固醇激素量均持续增大.在1998～2008年的10 a间,辽宁、吉林和黑龙江三省的类固醇激素排放量分别增长了2 272.7、1 951.1和1 634.8 kg,并且省会城市沈阳、长春和哈尔滨的增长最为明显.东北三省各城市中畜禽粪便类固醇雌激素排放量最大的是长春,达到874.7 kg;哈尔滨和沈阳的排放量在各自省份中也是最大,分别为652.7 kg和603.1 kg·辽宁省的畜禽类固醇激素排放总量在东北三省为最多,所排放类固醇雌激素的雌二醇等当量浓度EEQs预测值也最高,达到17.1ng·L-1.如果以英国环保署(Environment Agency,United Kingdom)建议的最低可观测效应浓度10 ng·L-1为参考依据,辽宁省在目前的畜禽养殖规模和结构下,所排放的粪便类固醇雌激素极有可能会对地表水体中的水生生物产生内分泌干扰效应.     

Factors influencing the contents of metals and As in soils around the watershed of Guanting Reservoir, China

Topsoil samples from 61 sites around the Guanting Reservoir,China,were measured for Cu,Zn,Cr,Ni,Cd,Pb and As concentrations.The mean concentrations of Cu,Zn,Cr,Ni,Cd,Pb and As were 16.8,59.4,37.8,18.3,0.32,20.1 and 8.67 mg/kg dry weight,respectively.Factors that influence the dynamics of these metals in soils around the watersheds of Beijing reservoirs were examined.The influence of atmospheric deposition,land use,soil texture,soil type and soil chemical parameters on metal contents in soils was investigated.Atmospheric deposition,land use and soil texture were the important factors affecting heavy metal residues.Soil type and soil chemical parameters were also involved in heavy metal retention in soils.The data provided in this study are considered crucial for reservoir remediation,especially since the Guanting Reservoir will serve as one of the main drinking water sources for Beijing in the foreseeable future.     

Removal and transformation of organic matters in domestic wastewater during lab-scale chemically enhanced primary treatment and a trickling filter treatment

To find a simple and economical way for treating the domestic wastewater in small counties and towns, a process combining chemically enhanced primary treatment and a trickling filter (CEPT-TF, representing the physical and biological effects) was constructed and operated in laboratory conditions. The characteristic behaviors of dissolved organic matter in raw wastewater and effluents were examined during steady-state operation. Experimental results showed that the process of CEPT and TF in series was beneficial for the removal of hydrophobic and hydrophilic organics. Specially, the hydrophobic and aromatic materials could be preferentially removed in the CEPT unit, and the hydrophilic fraction in the TF. Structural changes of the organic fractions during the operation of the different units were also characterized via spectrum analysis.     

Sulfur-containing amino acid methionine as the precursor of volatile organic sulfur compounds in algea-induced black bloom

After the application of methionine, a progressive and significant increase occurred in five volatile organic sulfur compounds (VOSCs): methanethiol (MeSH), dimethyl sulfide (DMS), dimethyl disulfide (DMDS), dimethyl trisulfide (DMTS) and dimethyl tetrasulfide (DMTeS). Even in the untreated control without a methionine addition, methionine and its catabolites (VOSCs, mainly DMDS) were found in considerable amounts that were high enough to account for the water’s offensive odor. However, blackening only occurred in two methionine-amended treatments. The VOSCs production was observed to precede black color development, and the reaching of a peak value for total VOSCs was often followed by water blackening. The presence of glucose stimulated the degradation of methionine while postponing the occurrence of the black color and inhibiting the production of VOSCs. In addition, DMDS was found to be the most abundant species produced after the addition of methionine alone, and DMTeS appeared to be the most important compound produced after the addition of methionine+glucose. These results suggest that methionine acted as an important precursor of the VOSCs in lakes suffering from algea-induced black bloom. The existence of glucose may change the transformation pathway of methionine into VOSCs to form larger molecular weight compounds, such as DMTS and DMTeS.     

Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

含油污泥微乳化处理工艺研究

利用微乳化法对含油污泥进行资源化处理。通过对现场采得的SLGD含油污泥样品处理,得到该油泥的最佳微乳液组成为:SDS 0.16 g/mL,OTAC 0.04 g/mL,正丁醇0.47 g/mL,NaCl 0.034 g/mL,脱油率最高可达42.53%。最佳单次处理量为12 g(以10 mL水为基准);处理温度为30℃,最佳处理时间为30 min;在保证脱油率的前提下,微乳液可重复使用3次。     

生活垃圾填埋场老场扩建方式探讨

介绍了生活垃圾填埋场老场扩建工程中横向扩建、纵向扩建两种常用的方式及各自的设计要点。结合浙江西部某县城生活垃圾填埋场的扩建工程实例,分析了在填埋场扩建工程设计中应考虑的与老场系统衔接、扩建后新场垃圾堆体不均匀沉降及新场堆体稳定性等问题,并依照工程实际提出了解决方案。     

物元分析模型在生活垃圾分类收集方案评价中的应用

家庭生活垃圾分类收集是实现城市生活垃圾无害化、减量化和资源化的重要方面,而生活垃圾分类收集方案评价也是实现生活垃圾综合管理的有效方法。以昆明市居民区生活垃圾分类收集为例,设计5种垃圾分类收集方案,基于问卷调查和层次分析,并建立物元分析模型,得出最优分类方案是将生活垃圾分为厨余垃圾与其他垃圾2大类。     

废弃SCR脱硝催化剂的再生及其脱硝性能研究

对废弃脱硝催化剂处理后重新加工再生,研究了添加剂对其粉体成型和再生催化剂脱硝活性的影响,探讨了反应温度、空速、n(NH3)∶n(NO)摩尔比、氧含量、H2O和SO2对再生催化剂NH3选择性催化还原(SCR)NO的影响。结果表明:最佳再生条件是使用5%羧甲基纤维素和10%无机粘结剂辅助成型;废弃催化剂再生利用率高达90%;再生催化剂抗压强度为4.73 MPa,优于商用催化剂;空速5 000 h-1、氨氮摩尔比1、氧含量6%时,脱硝活性温度窗口为310⁴50℃,350℃时活性最高为94%;350℃时,单独通入1 000×10-6SO2或10%H2O对再生催化剂活性均有一定抑制作用,最低活性分别为70%和81%,停止通入SO2或H2O后其活性逐渐恢复;同时通入1 000×10-6SO2和10%H2O,再生催化剂活性下降至63%并于1 h内保持相对稳定,停止通入SO2和H2O 2 h后,活性逐渐恢复到73%。     

低温等离子体协同处理Hg~0、NO_x、SO_2的机理研究

低温等离子污染物处理技术具有工艺简单、可协同控制多种污染物、占地面积小等特点,是目前在污染物控制技术领域的研究热点。主要介绍气体放电产生低温等离子体去除污染物过程中存在的O2、CO2气体对污染物去除效率的影响、NO x和SO2对Hg去除效率的影响和加入H2O、NH3、HCl对污染物去除效率的影响研究。