Validation of a standardized portable fluorescence method for determining trace beryllium in workplace air and wipe samples

Beryllium is widely used in industry for its unique properties; however, occupational exposure to beryllium particles can cause potentially fatal disease. Consequently, exposure limits for beryllium particles in air and action levels on surfaces have been established to reduce exposure risks for workers. Field-portable monitoring methods for beryllium are desired in order to facilitate on-site measurement of beryllium in the workplace, so that immediate action can be taken to protect human health. In this work, a standardized, portable fluorescence method for the determination of trace beryllium in workplace samples, i.e., air filters and dust wipes, was validated through intra- and inter-laboratory testing. The procedure entails extraction of beryllium in 1% ammonium bifluoride (NH(4)HF(2), aqueous), followed by fluorescence measurement of the complex formed between beryllium ion and hydroxybenzoquinoline sulfonate (HBQS). The method detection limit was estimated to be less than 0.02 microg Be per air filter or wipe sample, with a dynamic range up to greater than 10 microg. The overall method accuracy was shown to satisfy the accuracy criterion (A< or = +/-25%) for analytical methods promulgated by the US National Institute for Occupational Safety and Health (NIOSH). Interferences from numerous metals tested (in >400-fold excess concentration compared to that of beryllium) were negligible or minimal. The procedure was shown to be effective for the dissolution and quantitative detection of beryllium extracted from refractory beryllium oxide particles. An American Society for Testing and Materials (ASTM) International voluntary consensus standard based on the methodology has recently been published.     

Phytoextraction of heavy metals by willows growing in biosolids under field conditions

Biosolids produced by sewage treatment facilities can exceed guideline thresholds for contaminant elements. Phytoextraction is one technique with the potential to reduce these elements allowing reuse of the biosolids as a soil amendment. In this field trial, cuttings of seven species/cultivars of Salix(willows) were planted directly into soil and into biosolids to identify their suitability for decontaminating biosolids. Trees were irrigated and harvested each year for three consecutive years. Harvested biomass was weighed and analyzed for the contaminant elements: As, Cd, Cu, Cr, Hg, Pb, Ni, and Zn. All Salix cultivars, except S. chilensis, growing in soils produced 10 to 20 t ha(-1) of biomass, whereas most Salix cultivars growing in biosolids produced significantly less biomass (<6 t ha(-1)). Salix matsudana (30 t ha(-1)) and S. × reichardtii A. Kerner (18 t ha(-1)) had similar aboveground biomass production in both soil and biosolids. These were also the most successful cultivars in extracting metals from biosolids, driven by superior biomass increases and not high tissue concentrations. The willows were effectual in extracting the most soluble/exchangeable metals (Cd, 0.18; Ni, 0.40; and Zn, 11.66 kg ha(-1)), whereas Cr and Cu were extracted to a lesser degree (0.02 and 0.11 kg ha(-1)). Low bioavailable elements, As, Hg, and Pb, were not detectable in any of the aboveground biomass of the willows.     

Combined effects of deltamethrin, temperature and salinity on oxidative stress biomarkers and acetylcholinesterase activity in the black tiger shrimp (Penaeus monodon)

This study aimed to investigate the interactions of two abiotic factors (temperature and salinity) and deltamethrin (pyrethroid pesticide) exposure on some oxidative stress biomarkers as well as on acetylcholinesterase activity (AChE) in hepatopancreas, gills and muscle of black tiger shrimp (Penaeus monodon). A combination of three temperatures (24, 29 and 34 °C), two salinities (15 and 25 ppt), and the absence or presence of 0.1 μg L⁻¹ deltamethrin was applied on shrimp during 4 d under laboratory conditions. Lipid peroxidation level (LPO) and glutathione S-transferase activity (GST) were not affected by combined effect of temperature, salinity and deltamethrin in any of the studied tissues. Deltamethrin impaired other tested oxidative stress biomarkers, i.e. total glutathione (tGSH), catalase (CAT), glutathione peroxidase (GPx). tGSH level significantly increased in hepatopancreas due to deltamethrin exposure mainly at 34 °C, while pesticide effects on tGSH and CAT activity in gills were influenced by both temperature and salinity. In addition, GPx activity in hepatopancreas decreased after deltamethrin treatment mainly at 24 °C. Finally, AChE in muscle was strongly inhibited by deltamethrin at all tested temperatures and salinities. These novel findings demonstrate that interactions between abiotic factors and a commonly used pesticide exposure should be taken into account when analyzing some widespread biomarkers in black tiger shrimp.     

Quantification of self pollution from two diesel school buses using three independent methods

We monitored two Seattle school buses to quantify the buses’ self pollution using the dual tracers (DT), lead vehicle (LV), and chemical mass balance (CMB) methods. Each bus drove along a residential route simulating stops, with windows closed or open. Particulate matter (PM) and its constituents were monitored in the bus and from a LV. We collected source samples from the tailpipe and crankcase emissions using an on-board dilution tunnel. Concentrations of PM₁, ultrafine particle counts, elemental and organic carbon (EC/OC) were higher on the bus than the LV. The DT method estimated that the tailpipe and the crankcase emissions contributed 1.1 and 6.8 μg m^?3 of PM_2.5 inside the bus, respectively, with significantly higher crankcase self pollution (SP) when windows were closed. Approximately two-thirds of in-cabin PM_2.5 originated from background sources. Using the LV approach, SP estimates from the EC and the active personal DataRAM (pDR) measurements correlated well with the DT estimates for tailpipe and crankcase emissions, respectively, although both measurements need further calibration for accurate quantification. CMB results overestimated SP from the DT method but confirmed crankcase emissions as the major SP source. We confirmed buses’ SP using three independent methods and quantified crankcase emissions as the dominant contributor.     

Improving the redox performance of photocatalytic materials by cascade-type charge transfer: a review

Environmental and energy crises are a major threat to the sustainable growth of the human society, calling for greener technologies such as photocatalysis. Photocatalysis is a solar-driven approach that converts photon energy into chemical energy, yet the conversion efficacy of classical photocatalysis is usually restricted and controlled by the charge carrier’s separation and migration. Enhanced conversion requires suppressed recombination rate and superior redox abilities. From this aspect, the manipulation of heterojunction allows to overcome the drawback of classical photocatalysis. The cascade mechanism follows a dual direct charge migration route, resulting in enhanced redox abilities and efficient mineralization of pollutants. Here, we review photocatalytic material aspects in improving redox ability by cascade charge transfer. We describe the mechanisms and applications of three cascade systems: two type-II cascade systems, mediator-based cascade systems, and dual direct Z-scheme. We highlight the superiority of the direct dual cascade route with a prolonged lifetime of carriers, higher quantum yield, and enhanced redox abilities. Applications to carbon dioxide reduction, hydrogen production by water splitting and pollutant degradation are discussed.