Nanoplastics are potentially more dangerous than microplastics

Environmental Chemistry Letters - Nanoplastics are probably much more dangerous for living organisms than microplastics because they are more abundant and reactive. They can potentially...     

Five-wheel framework for system-based monitoring of heavy metal pollution in rivers

Sectorial approach for monitoring heavy metal pollution in rivers has failed to report realistic pollution status and associated ecological and human health risks. The increasing spread of heavy metals from different sources and emerging risks to human and environmental health call for reexamining heavy metal pollution monitoring frameworks. Also, the sources, spread, and load of heavy metals in the environment have changed significantly over time, requiring consequent modification in the monitoring frameworks. Therefore, studies on heavy metal monitoring in rivers conducted in the last decade were evaluated for experimental designs, research frameworks, and data presentations. Most studies (∼99%) (i) lacked inclusiveness of all environmental compartments; (ii) focused on “one pollutant – one/two compartment” or sometimes “one pollutant – one compartment – one effect” approach; and (iii) remained “data-rich but information poor.” An ecological approach with integrative system thinking is proposed to develop a holistic approach for monitoring river pollution. It is visualized that heavy metal monitoring, risk analyses, and water management must incorporate tracking pollutants in different environmental compartments of a river (water, sediment, and floodplain/bank soil) and consider correlating it with riverbank land use. The systems-based pollution monitoring and assessment studies will reveal the critical factors that drive heavy metals pollutant movement in ecosystems and associated potential risks to the environment, wildlife, and humans. Also, water quality and pollution indexing tools would help better communicate complex pollution data and associated risks among all stakeholders. Therefore, integrating systems approaches in scientific- and policy-based tools would help sustainably manage the health of rivers, wildlife, and humans.     

Emerging applications of green coconut: A promising lignocellulosic biomass

Waste accumulation is a grave concern and becoming a transboundary challenge for environment. During Covid-19 pandemic, diverse type of waste were collected due to different practices employed in order to fight back the transmission rate of the virus. Covid-19 was proved to be capricious catastrophe of this 20th century and even not completely eradicated from the world. The havoc created by this imperceptible quick witted, pleomorphic deadly virus can't be ignored. Though a number of vaccines have been developed by the scientists but there is a fear of getting this virus again in our life. Medical studies prove that immunity drinks will help to reduce its reoccurrences. Coconut water is widely used among all drinks available globally. Its massive consumption created an incalculable pile of green coconut shells around the different corners of the world. This practice generating enormous problem of space acquisition for the environment. Both the environment and public health will benefit from an evaluation of quantity of coconut waste that is being thrown and its potential to generate value added products. With this context, present article has been planned to study different aspects like, coconut waste generation, its biological properties and environmental hazards associated with its accumulation. Additionally, this review illustrates, green technologies for production of different value added products from coconut waste.     

The Water Poverty Index: An application in the Indian context

For developing countries, the proportion of households covered by improved water resources is conventionally used to assess the water stress situation. However, in a developing country like India with a high population growth rate, water demand and supply are considerably mismatched. An agro-based economy with large variations in socio-economic conditions and changing rainfall patterns across the states imposes greater challenge on water resources. Therefore, there is a need to assess the water situation across the country in a holistic manner. This paper proposes application of the Water Poverty Index as a comprehensive policy tool to assess actual water-stress situation across 20 major states in India. This index covers important socio-economic parameters such as access, capacity, use and environment in addition to water resources of each state. The results and findings are expected to be of use to policymakers and implementing agencies. In view of policy formulation, a state performing well on a Water Poverty Index component can act as a benchmark for another state.     

Remediation of noxious pollutants using nano-titania-based photocatalytic construction materials: a review

Environmental Science and Pollution Research - Nano-titania (n-TiO2), due to its unique photocatalytic and hydrophobic properties, can be used to prepare self-cleaning cement-based smart building...     

Synthesis,Characterization and Environmental Applications of a New Bio-Composite Gelatin-Zr(IV) Phosphate

Gelatin-Zr(IV) phosphate composite (GT/ZPC) was synthesized by sol–gel method. Different techniques viz. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray powdered diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for the characterisation of GT/ZPC composite ion exchanger. The ion exchange capacity (IEC) of GT/ZPC was observed to be better (1.04 meq g^?1) than its inorganic counterpart (0.64 meq g^?1). The pH studies revealed the monofunctional nature of GT/ZPC with one inflection point. The distribution studies showed that the GT/ZPC was highly selective for Cd²⁺ as compare to other metal ions. The environmental applicability of ion exchanger has been analysed for binary separations of metal ions using column method. Cd²⁺ was effectively removed from synthetic mixture of metal ions (Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cu²⁺).     

Efficient microwave degradation of humic acids in water using persulfate and activated carbon

Environmental Chemistry Letters - Humic acids are complex mixtures of organic molecules of different sizes, molecular weights and functional groups such as phenols, carboxyls, quinones and amino...     

Bright photophase accelerates re-entrainment after experimental jetlag in Drosophila

The efficacy of bright photophase (BP) in accelerating the re-entrainment of Drosophila biarmipes rhythm following 8?h phase advance and delay of light–dark (LD) cycle was examined by subjecting the flies to 24?h LD cycles with dim photophase (DP) at 30?lx and BP at 300?lx. Re-entrainment was analysed by using the activity onset, activity offset and the duration of activity. Following LD advance or delay, the BP flies re-entrained faster than the DP flies which was attributed to the enhanced zeitgeber strength of BP. Nevertheless, the re-entrainment was a protracted process even in the BP flies since the activity offsets underwent more transients than the activity onsets. Thus, this study demonstrates that the BP accelerates the re-entrainment in D. biarmipes. It, however, also reveals that the re-entrainment is a prolonged process when the activity onset and offset are regarded as the rhythm markers.     

Persistence and mobility of 2,4-D in unsaturated soil zone under winter wheat crop in sub-tropical region of India

The present study was undertaken to determine the persistence and mobility of 2,4-dichlorophenoxy acetic acid (2,4-D) in unsaturated soil zone under real field conditions for the wheat crop in Roorkee, India. Three experimental plots were chosen in the agricultural field itself to represent the real field conditions in the study area and the potential movement and persistence of herbicide 2,4-D was investigated under three different irrigation treatments. The presence of herbicide along with soil water content was determined in soil at different depths at a temporal scale. The movement of the herbicide was also simulated numerically by solving the coupled soil water content movement and mass transport equations using HYDRUS-1D. The measured soil water content trends and the 2,4-D concentration profiles showed a good agreement with the numerically simulated results. The maximum effect of the herbicide was primarily retained up to 15 cm of the soil profile. The current existing dosage of 0.5 kg ha⁻¹ of pesticide was found to be safe to avoid soil contamination as no residue of 2,4-D was traced at the end of the wheat crop season in any of the plots. Higher concentrations of 2,4-D were also simulated numerically and the simulated results showed that the safe dosage of pesticide application would depend on irrigation treatments.     

Geometric variability and surface finish of weld zones in Yb:YAG laser welded advanced high strength steels

Laser welding is used for joining advanced high strength steels (AHSS) to improve formability and performance. In this paper, the geometric variability observed in the fusion zones and heat affected zones of several combinations of AHSS (different types, coatings and thicknesses), which were butt welded using a Trumpf TRUDISK 6000^® Yb:YAG laser beam, is presented. The surface texture parameters such as roughness and waviness of laser welds were also measured and correlated with geometric variability. Results indicate that although high quality welds with minimal defects can be obtained using the Yb:YAG laser welding process, there is considerable variation in both the shape and the dimensions of weld zones. The variability increased with an increase in thickness differentials between the sheets being welded. Analysis of the top of the weld surfaces also suggested that aluminum coating on USIBOR samples contributes significantly to increased roughness. An increase in laser power coupled with corresponding increase in welding speed did not impact variability. A fair correlation between the surface roughness and weld region variability exists, although this needs further study.