Absorption characteristics of new solvent based on a blend of AMP and 1,8-diamino-p-menthane for CO2 absorption

Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO₂ absorption. A 2-amino- 2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO₂ than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH₃), respectively. The reaction rate constant for CO₂ absorption by the AMP/KIER-C3 solution was determined by the following equation: k_2,AMP/C3 = 7.702×10⁶ exp (-2248.03/T). A CO₂ loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO₂ absorption capability of AMP.     

Enhancement of turbulent scalar mixing and its application by a multihole nozzle in selective catalytic reduction of NOx

The mixing characteristics of a passive scalar in the turbulent flow of a selective catalytic reduction process were numerically and experimentally investigated, focusing especially on an injection nozzle with multiple holes for the reducing agent. The multihole injection nozzle studied has six holes that are perpendicular to the ambient flue gas flow and are located near the tip of the nozzle. Large eddy simulation was applied to the turbulent flow and mixing fields to elucidate the mixing mechanism of the proposed nozzle compared with the single-hole nozzle that is commonly used in the conventional selective catalytic reduction process. From the results, there exist broader regions of higher turbulent intensities for the multihole nozzle than for the conventional single-hole nozzle. These regions are well matched with the positions of high vorticity in the near upstream region of the jet flow issuing from the multiple holes of the nozzle. Consequently, the high turbulent intensities and vorticity magnitudes lead to intensified mixing between the flue gas and the reducing agent. Hence, the most suitable molar ratio between NOx and the reducing agent for the catalytic reaction can be easily obtained within a shorter physical mixing length as a result of the enhanced scalar mixing. Finally, the numerical results were applied to a trial design version of a multihole nozzle, and this nozzle was experimentally tested to confirm its mixing performance.     

The exceedance patterns of air quality criteria: a case study of ozone and nitrogen dioxide in Seoul, Korea between 1990 and 2000

In this study, the environmental behavior of two major airborne pollutants, ozone and nitrogen dioxide, was investigated with respect to their exceedance patterns of air quality criteria. For this purpose, we used data sets collected from a total of 31 air quality monitoring stations dispersed across the Seoul metropolitan city between 1990 and 2000. In the case of NO(2), the frequency of hourly exceedance data sets exhibited little changes in the early 90s. However, it increased dramatically after 1995, probably in compliance with a rapid increase in the total number of automobiles. Likewise, the daily exceedance of O(3) in the early 90s was not significant, approaching 100 cases (except in 1994). However, its total quantity began to surpass 300 cases since around 1996. Comparison of those exceedance data was also made among spatially divided data groups. In the case of NO(2), the occurrence of exceedance data was dominated by the western part of the city in both magnitude and frequency. On the other hand, that for O(3) was characterized by notably strong occurrences in the eastern counterpart. The overall results of our analysis of the NO(2) and O(3) exceedance data sets indicate an inextricable linkage between the two pollutants in association with geographical and meteorological factors.     

Distribution characteristics of polychlorinated biphenyls in crucian carp (Carassius auratus) from major rivers in Korea

Polychlorinated biphenyls (PCBs) levels in crucian carp were determined at 20 locations along four major river systems, several small-scale rivers and a wetland in Korea. Twenty-eight congeners, ranging from tri- to hepta-CBs were detected. A gas chromatograph with a mass selective detector was used to quantify the individual PCB congeners. The objectives of this study were to investigate the levels of contamination of PCBs in freshwater fish and to observe the pattern of their distribution. The sampling locations were chosen among 31 sampling sites that are currently used as environmental residue checkpoints by the Korean Ministry of Environment. Concentrations of individual congeners ranged from not detectable (n.d.) to 0.75 ng g(-1) on a wet weight basis. The total concentrations of PCBs at each site ranged from n.d. to 5.41 ng g(-1) of wet weight. The most heavily contaminated site was the Nakdong estuary located near the Shinpyung-Janglim factory district. The PCB 153 and 138 were the principal congeners and penta- and hexa-chlorinated biphenyls comprised the main congener groups.     

Changes in air saturation and air-water interfacial area during surfactant-enhanced air sparging in saturated sand

Reduction in the surface tension of groundwater, prior to air sparging for removal of volatile organic contaminant from aquifer, can greatly enhance the air content and the extent of influence when air sparging is implemented. However, detailed information on the functional relationship between water saturation, air-water contact area induced by air sparging and the surface tension of water has not been available. In this study, the influence of adding water-soluble anionic surfactant (sodium dodecyl benzene sulfonate) into groundwater before air sparging on the air-water interfacial area and water saturation was investigated using a laboratory-scale sand packed column. It was found that water saturation decreases with decreasing surface tension of water until it reaches a point where this trend is reversed so that water saturation increases with further decrease in the surface tension. The lowest water saturation of 0.58 was achieved at a surface tension of 45.4 dyn/cm, which is considered as the optimum surface tension for maximum de-saturation for the initially water-saturated sand used in this study. The air-water contact area generated in the sand column due to air sparging was measured using a gaseous interfacial tracer, n-decane, and was found to monotonically increase with decreasing water saturation. The results of this study provide useful design information for surfactant-enhanced air sparging removal of volatile contaminants from aquifers.     

The effect of emergent macrophytes on the dynamics of sulfur species and trace metals in wetland sediments

This study focuses on the effect of plants on the biogeochemistry of sulfur species and the mobility of heavy metals in wetland sediments. Results showed that, in the presence of plants, sediments had elevated sulfate concentrations in the rhizosphere during the growing season, ranging from 0.2 to 6.20 mmol L(-1), whereas only a small difference in the sulfate profiles between vegetated and non-vegetated sediments was observed during senescence. Based on the sulfate concentration increase, the oxygen release rate from the roots to achieve the corresponding oxidation of sulfide was estimated as 0.85 g m(-2) day(-1). Evapotranspiration-induced advection is a major contributor to the transport of sulfate from the water column into the sediments, and also allows dissolved trace metals (i.e. Cd, Pb, and Zn) to be transported into the sediments and react with the acid volatile sulfide pool, resulting in the immobilization of trace metals in these sediments.     

Compositional data analysis and geochemical modeling of CO2–water–rock interactions in three provinces of Korea

Environmental Geochemistry and Health - The CO2-rich spring water (CSW) occurring naturally in three provinces, Kangwon (KW), Chungbuk (CB), and Gyeongbuk (GB) of South Korea was classified based...     

Assessment using CFD of the wind direction on the air discharges caused by natural ventilation of a poultry house

Air inside poultry houses must be removed on a regular basis to prevent excess of heat, particles and noxious gases that can imperil animals. To cope with this issue, natural ventilation could be an effective method when assisted by accurate predictions. This study investigates air discharges caused by natural ventilation of a poultry house by means of a three-dimensional computational fluid dynamics (CFD) model. It solves the governing equations of momentum, heat and mass transport, radiative transfers and animal-generated heat. Wind directions of 0°, 36° and 56° (0° corresponds to a wind blowing perpendicular to the ridgeline) were investigated; the CFD model predictions achieved a RMSE of 1.2 °C and 0.6 g[H₂O] kg^?1 [dry air] for internal temperature and absolute humidity, respectively, when air blew with an angle of 36°. Air renewal rates (ARR) were 39.5 (±?1.9), 34.9 (±?2.2) and 33.6 (±?1.7) volumes of the building per hour, when air blew at 0°, 36° and 56°, respectively. Such ARR predictions served to know how the gases contained in air would likely spread downstream from the building in order to define regions of potentially high gas concentration that could endanger neighbouring habitable facilities.