Satisfying shoppers’ psychological needs: From public market to cyber-mall

In many cities in North America and Europe, shopping centres are replacing the traditional high street shops. At the same time, electronic shopping is growing rapidly. In this paper, the results of a literature review of environment–behaviour research on shopping and shopping environments (e.g., farmer's markets, shopping centres, and electronic shopping) are presented. The focus of analysis is on how the physical features (e.g., layout and background music) influence shoppers’ experiences, and on how well these environments satisfy the psychological needs of their shoppers (e.g., social interaction, sensory stimulation, and security and comfort). Any implications for environmental design, and the future of shopping environments are discussed. A conceptual framework and suggestions for future research are proposed.     

A decomposition analysis of CO2 emissions: evidence from Malaysia’s tourism industry

The most important question raised from issues of environmental degradation is how economic activities bring about changes that will result in pollution. In the pursuit of tourism economy, contrary to popular interest, the travel and tourism (T&T) industry may cause environmental damages through the emissions of carbon dioxide (CO₂) from energy consumption in areas such as transportation and delivery of amenities. Given this major concern, this paper attempts to investigate the linkage between tourism and CO₂ emissions in Malaysia between 1981 and 2011. In particular, this study fills the knowledge gap by taking a closer look at the impact of international tourist arrivals on CO₂ emissions by sector – electricity and heat generation and transport. Results from the bound test method suggest that there exists a long-run relationship among the variables under consideration when CO₂ emissions become the dependent variable. The original result is similarly robust to alternatives, which are CO₂ emissions from sectors of electricity and heat generation and transport. Furthermore, the vector error correction model causality analysis indicates a causal relationship between tourism and CO₂ emissions by transport and electricity and heat generation. Subsequently, several tourism-related policies are drawn from these findings.     

Inherently safer design of solvent processes at the conceptual stage: Practical application for substitution

The implementation of inherently safer design concepts is considered beneficial to avoid hazards during early stages of design. The application of existing process design and modeling techniques that aid ‘substitution’, ‘intensification’ and ‘attenuation’ has been shown in this work. The techniques have been applied to solvent processes because of the inherent hazards associated with them, such as large inventories, and presence of highly toxic and flammable materials. For ‘substitution’, computer aided molecular design technique has been applied to select inherently safer solvents for a solvent operation. For ‘intensification’ and ‘attenuation’, consequence models and regulatory guidance from EPA RMP have been integrated into process simulation. Combining existing techniques provides a design team with a higher level of information to make decisions based on process safety. A case study has been shown for liquid extraction of acetic acid–water mixture. Suitable solvents were identified using ICAS 11.0-ProCAMD, and consequence models were integrated into Aspen plus simulator using a calculator sheet. Solvents such as 5-nonanone, 2-nonanone and 5-methyl-2-hexanone provide inherently safer options, but conventionally-used solvent, ethyl acetate, provides higher degree of separation capability. A conclusive decision regarding feasible solvents and operating conditions would depend on design requirements, regulatory guidance, and safety criteria specified for the process. Inherent safety has always been an important consideration to be implemented during early design steps, and this paper presents a methodology to incorporate the principles and to obtain inherently safer alternatives.     

Hydrous ferric oxide nanoparticles hosted porous polyethersulfone adsorptive membrane: chromium (VI) adsorptive studies and its applicability for water/wastewater treatment

In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m² h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.

     

评估可离子化有机化合物的生物累积潜力：当前的认知和研究的重点

本研究的目的是回顾目前关于可离子化有机化合物(IOCs)的生物累积潜力的认知，重点讨论鱼类经验数据的有效性。IOCs在鱼体内的生物积累潜力可以很好地表征为：依赖pH的鳃摄取和排泄，肠道吸收和磷脂吸附(膜-水分区)。关键的挑战包括缺乏关于IOCs生物转化和血浆结合的经验数据。鱼拥有多种蛋白质，可以在细胞膜上传输IOCs。然而，除了少数情况下，这种传输对环境污染物的吸收和积累的意义是未知的。本文提出了2个研究案例。第一个描述了pH值和生物转化对有机酸和碱的生物富集的建模作用，而第二个则采用了一个更新的模型来研究导致全氟烷基酸积累的因素。全氟化烷基酸个案研究是值得关注的，因为它说明了膜转运蛋白在肾脏中可能具有的重要性，并强调了交叉比对方法(read-across approaches)的潜在价值。认识到当前需要对IOCs进行生物累积危害评估和生态风险评估，作者提供了一个分层策略，从保守的假设(模型和相关数据)到需要化学特定信息的更复杂的模型。
精选自Armitage, J. M., Erickson, R. J., Luckenbach, T., Ng, C. A., Prosser, R. S., Arnot, J. A., Schirmer, K. and Nichols, J. W. (2017), Assessing the bioaccumulation potential of ionizable organic compounds: Current knowledge and research priorities. Environmental Toxicology and Chemistry, 36: 882–897. doi: 10.1002/etc.3680
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3680/full
     

The geomorphology and ecosystem service economic value baselines of tributary watersheds in Malaysia

Environment, Development and Sustainability - This study presents how a cluster of tributary watersheds was evaluated for geomorphology and ecosystem service economic value baselines. Tributary...     

Evaluation of hazardous airborne carbonyls on a university campus in southern China

A comprehensive assessment of indoor carbonyl compounds for the academic staff, workers, and students was conducted on a university campus in Xiamen, China. A total of 15 representative environment categories, including 12 indoor workplaces and three residential units, were selected. The potential indoor pollution sources were identified based on the variability in the molar compositions and correlation analyses for the target carbonyls. Furnishing materials, cooking emissions, and electronic equipment, such as photocopiers, can generate various carbonyls in the workplace. Comparison studies were conducted in the clerical offices, demonstrating that off-gases from wooden furniture and lacquer coatings, environmental tobacco smoke (ETS), and the use of cleaning reagents elevated the indoor carbonyl levels. The measured concentrations of formaldehyde and acetaldehyde in most locations surpassed the exposure limit levels. The lifetime cancer hazard risk (R) associated with formaldehyde was above the concern risk level (1 × 10^?6) in all of the workplaces. The results indicate that formaldehyde exposure is a valid occupational health and safety concern. Wooden furniture and refurbishing materials can pose serious health threats to occupants. The information in this study could act as a basis for future indoor air quality monitoring in Mainland China.

Implications:A university campus represents a microscale city environment consisting of all the working, living, and commercial needs of staff and students. The scope of this investigation covers 21 hazardous carbonyl species based on samples collected from 15 categories of workplaces and residential building in a university campus in southern China. Findings of the study provide a comprehensive assessment of indoor air quality with regards to workers’ health and safety. No similar study has been carried out in China.     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

A hybrid approach for environmental impact evaluation of design options

The strengthened environmental regulatory requirements and general awareness of the need for environmental conservation worldwide, design for environment has become a key design criterion in new product development processes. Due to their resources-consuming attribute and the prerequisite expert knowledge in environmental sciences for the impacts interpretations, the existing forms of product-oriented environmental impact assessment methods are impractical to be adopted by product designers in small-and-medium enterprises. Life Cycle Assessment (LCA) is a generally accepted quantitative approach to assess a product’s environmental impact. However, a full LCA study often requires a considerable amount of data and therefore, it is regarded as not a handy tool for product design evaluations particularly at the initial design stage. This leads to our intention to develop an immediately applicable approach for decision-makers to evaluate the design options. The proposed approach integrates Analytic Hierarchy Process and Fuzzy Theory, with Evidential Reasoning (ER) to support the environmental impact evaluations of design options. A case study is carried out to demonstrate its applicability to prioritize the environmental impact of various design options. A symmetrical triangular distribution is introduced for calculating the expected utility and for testing the sensitivity of results.     

Modeling the dynamics of DDT in a remote tropical floodplain: indications of post-ban use?

Significant knowledge gaps exist regarding the fate and transport of persistent organic pollutants like dichlorodiphenyltrichloroethane (DDT) in tropical environments. In Brazil, indoor residual spraying with DDT to combat malaria and leishmaniasis began in the 1950s and was banned in 1998. Nonetheless, high concentrations of DDT and its metabolites were recently detected in human breast milk in the community of Lake Puruzinho in the Brazilian Amazon. In this work, we couple analysis of soils and sediments from 2005 to 2014 at Puruzinho with a novel dynamic floodplain model to investigate the movement and distribution of DDT and its transformation products (dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD)) and implications for human exposure. The model results are in good agreement with the accumulation pattern observed in the measurements, in which DDT, DDE, and DDD (collectively, DDX) accumulate primarily in upland soils and sediments. However, a significant increase was observed in DDX concentrations in soil samples from 2005 to 2014, coupled with a decrease of DDT/DDE ratios, which do not agree with model results assuming a post-ban regime. These observations strongly suggest recent use. We used the model to investigate possible re-emissions after the ban through two scenarios: one assuming DDT use for IRS and the other assuming use against termites and leishmaniasis. Median DDX concentrations and p,p′-DDT/p,p′-DDE ratios from both of these scenarios agreed with measurements in soils, suggesting that the soil parameterization in our model was appropriate. Measured DDX concentrations in sediments were between the two re-emission scenarios. Therefore, both soil and sediment comparisons suggest re-emissions indeed occurred between 2005 and 2014, but additional measurements would be needed to better understand the actual re-emission patterns. Monte Carlo analysis revealed model predictions for sediments were very sensitive to highly uncertain parameters associated with DDT degradation and partitioning. With this model as a tool for understanding inter-media cycling, additional research to refine these parameters would improve our understanding of DDX fate and transport in tropical sediments.