原油氯化物的起因、危害及控制研究进展

叙述了原油中氯化物的种类、来源和分布情况,通过分析氯在石油炼制过程中的转化、反应以及对设备产生的危害,归纳了目前主要的脱氯技术和存在的问题,并提出有效的防护措施.     

“污泥+生物质”混合厌氧消化分类管理研究

污泥单独厌氧消化困难,产气量低,能量回收价值低.但“污泥+生物质”混合厌氧消化能够改善物料间的营养平衡,运行更平稳,既有效处理污泥,又能够提高甲烷产气量,更适合生产实际,符合行业发展趋势.分析了安阳市四家污水处理厂脱水污泥的重金属含量,依据土地利用限值标准,结合生产实际,把安阳市四个污水处理厂脱水污泥分类,分类混合厌氧消化处理后分类土地利用,既提高了污泥的土地利用,更强化了污泥土地利用的重金属管理.     

城市河道水质评价与研究

结合内梅罗指数法的原理,考虑金属毒性的积累效应,引入污染因子权重值,将权重值最大的评价指标纳入计算,采用改进的内梅罗指数法评价城市河道的水质污染状况。并对水质的划分标准临界值进行计算,以此作为评价水质污染状况的依据。研究结果表明,两种方法具有明显的差异,改进的内梅罗指数法对水质污染状况的评价结果较传统内梅罗指数法的辨识度更高,能够综合客观全面地体现城市河道水质状况,与真实情况较好的吻合,更为客观、合理。     

天目湖沙河水库尿素含量及其时空分布特征分析

为探索尿素在淡水生态系统中的作用,于2013年3月—2014年2月调查了江苏溧阳天目湖沙河水库及中田河入库河口中,尿素氮和不同形态氮素的含量和分布特征.结果表明,沙河水库中尿素普遍存在,全库年平均尿素氮浓度为0.016 mg·L-1(0.007—0.029 mg·L-1);河、库尿素氮含量在不同月份波动较大,施肥期的2月、6月、11月含量较高,而在非施肥期含量较低,且河、库含量更加接近;沙河水库尿素氮的空间分布随季节变化而变化,一般在下游旅游集中区和上游靠近农业区出现尿素氮含量高值.此外,沙河水库溶解性氮以无机氮库为主,有机氮占29.09%,硝态氮是库体的主要氮形态;其中尿素氮占总氮、溶解性总氮、溶解性有机氮和生物可利用氮的年平均百分比分别为1.80%、2.21%、8.31%、3.54%.相关分析表明,沙河水库尿素含量与溶解氧含量呈显著负相关,与溶解性有机氮呈显著正相关.研究表明,天目湖沙河水库尿素含量的时空变化主要受外源输入(人类活动)的影响,其时间变化规律与农业活动密切相关,空间分布差异主要受污染源(河道入库口、农业、旅游业和养殖业)分布及其活动的影响.     

Geostatistical analysis and risk assessment on soil total nitrogen and total soil phosphorus in the Dongting Lake plain area, China

Nonpoint-source pollution and water body eutrophication have become increasing concerns for scientists and policymakers. Nitrogen and phosphorus affect environmental pollution, especially lake eutrophication. To assess the environmental risk of soil total nitrogen (TN) and total phosphorus (TP) pollution, a typical ecological unit of Dongting Lake plain was selected as the experimental site. To verify the stationary of the data, a moving windows technique was adopted. Our results showed that Box-Cox transformation achieved normality in the data set and dampened the effect of outliers. The best theoretical model for semivariogram of TN and TP was a spherical model. The ordinary kriging estimates of TN and TP concentrations were mapped. The integrative comparisons of semivariogram parameters with different trends to the kriging prediction errors of TN and TP indicated that the two-order trend is preferable. Kriging SDs provided valuable information that will increase the accuracy of TN and TP mapping. The probability kriging method is useful to assess the risk of N and P pollution by providing the conditional probability of N and P concentrations exceeding the threshold concentrations of 3.2 and 1.05 g/kg, respectively. The probability distribution of TN and TP at different levels will be helpful to conduct risk assessment, optimize fertilization, and control the pollution of N and P.     

Copper leaching of MSWI bottom ash co-disposed with refuse: Effect of short-term accelerated weathering

Co-disposal of refuse with municipal solid waste incinerator (MSWI) bottom ash (IBA) either multi-layered as landfill cover or mixed with refuse could pose additional risk to the environment because of enhanced leaching of heavy metals, especially Cu. This study applied short-term accelerated weathering to IBA, and monitored the mineralogical and chemical properties of IBA during the weathering process. Cu extractability of the weathered IBA was then evaluated using standard leaching protocols (i.e. SPLP and TCLP) and co-disposal leaching procedure. The results showed that weathering had little or no beneficial effect on Cu leaching in SPLP and TCLP, which can be explained by the adsorption and complexation of Cu with DOM. However, the Cu leaching of weathered IBA was reduced significantly when situated in fresh simulated landfill leachate. This was attributed to weakening Cu complexation with fulvic acid or hydrophilic fractions and/or intensifying Cu absorption to neoformed hydr(oxide) minerals in weathered IBA. The amount of total leaching Cu and Cu in free or labile complex fraction (the fraction with the highest mobility and bio-toxicity) of the 408-h weathered IBA were remarkably decreased by 86.3% and 97.6% in the 15-day co-disposal leaching test. Accelerated weathering of IBA may be an effective pretreatment method to decrease Cu leaching prior to its co-disposal with refuse.     

大中型风机叶轮前盘的简易旋压成形

提出了一种适用于单件或小批量生产大中型风机叶轮前盘的新工艺——滚轮芯模简易旋压成形工艺,这种工艺经济实用,简便易行,可在一定范围内推广应用。     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

隔声屏障在冷却机组降噪中的设计与应用实证

本文对成都双流九江环保垃圾发电厂循环冷却机组进行噪声治理,通过在声音传播途径上设立隔声屏障,并对该声屏障进行声学设计理论计算,声屏障建成后该机组在厂界外1m处,噪声值达到国家厂界噪声排放标准要求,并通过详细的实测数据、建立图形,进一步验证了声屏障理论计算公式和保护范围。