Field controlled experiments of mercury accumulation in crops from air and soil

Field open top chambers (OTCs) and soil mercury (Hg) enriched experiments were employed to study the influence of Hg concentrations in air and soil on the Hg accumulation in the organs of maize (Zea mays L.) and wheat (Triticum aestivum L.). Results showed that Hg concentrations in foliages were correlated significantly (p < 0.05) with air Hg concentrations but insignificantly correlated with soil Hg concentrations, indicating that Hg in crop foliages was mainly from air. Hg concentrations in roots were generally correlated with soil Hg concentrations (p < 0.05) but insignificantly correlated with air Hg concentrations, indicating that Hg in crop roots was mainly from soil. No significant correlations were found between Hg concentrations in stems and those in air and soil. However, Hg concentrations in upper stems were usually higher than those in bottom stems, implying air Hg might have stronger influence than soil Hg on stem Hg accumulation.     

Photoelectrocatalytic degradation of pentachlorophenol in aqueous solution using a TiO2 nanotube film electrode

Titanium dioxide (TiO2) nanotube film electrodes are fabricated by the anodic oxidation method. Scanning electron microscopy (SEM) showed that these tubes were well aligned and organized into high-density uniform arrays. XRD analysis showed the TiO2 nanotubes to be in the anatase crystal form. The TiO2 nanotube film electrode exhibited increased photoelectrocatalytic (PEC) capability compared to a traditional TiO2 film electrode fabricated using the anodizing method for pentachlorophenol (PCP) degradation in aqueous solution. The bias potential, pH value, and electrolyte concentration were shown to be important factors influencing the degradation of PCP by the PEC method using the TiO2 nanotube film electrode as the working electrode.     

大中型风机叶轮前盘的简易旋压成形

提出了一种适用于单件或小批量生产大中型风机叶轮前盘的新工艺——滚轮芯模简易旋压成形工艺,这种工艺经济实用,简便易行,可在一定范围内推广应用。     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

隔声屏障在冷却机组降噪中的设计与应用实证

本文对成都双流九江环保垃圾发电厂循环冷却机组进行噪声治理,通过在声音传播途径上设立隔声屏障,并对该声屏障进行声学设计理论计算,声屏障建成后该机组在厂界外1m处,噪声值达到国家厂界噪声排放标准要求,并通过详细的实测数据、建立图形,进一步验证了声屏障理论计算公式和保护范围。     

兰州市大气颗粒物多环芳烃的恒能量同步荧光光谱特征研究

通过传统单波长激发/发射荧光光谱法与恒能量同步荧光光谱法进行对比,对大气颗粒物中多环芳烃(PAHs)进行了定性定量分析,采用恒能量同步荧光光谱法在不同能量差下建立了15种典型PAHs成分的恒能量同步荧光法的标准谱库.在各PAHs在最佳能量差下进行定量分析,结果表明,除苊荧光信号响应较差外,其余PAHs的LOD和LOQ分别为0.0580～3.18、0.232～12.7 ng·mL~(-1).15种PAHs的空白和一定浓度下的加标回收率范围在82.8%～120.0%,相对标准偏差范围在0.51%～5.87%之间,以恒能量同步荧光光谱进行了兰州地区大气颗粒物中15种PAHs分布特征分析.     

浅海平台油气火灾事故模拟评估应用

全球海洋油气开发重特大火灾事故频发,油气生产安全面临严峻挑战,以我国浅海某中心平台组为研究对象,对可能发生的三相分离器喷射火火灾、管线交叉处喷射火火灾、生产平台池火火灾以及储罐平台池火火灾,采用FDS软件建立该平台组的火灾动力学模型,对油气泄漏后火灾的发展态势、火场温度、热辐射强度、设备温度以及不同火灾工况的对比分析,研究火灾发生后对人员伤害,以及平台上油气管线、分离器、油气储罐、平台栈桥等重要设备安全性的影响,并提出操作人员和重要设备的安全距离。针对火灾事故风险控制提出建议措施,对海上火灾风险分析未来研究方向进行阐述。