Effect of cadmium on nodulation and N2-fixation of soybean in contaminated soils

The effects of cadmium stress on nodulation, N2-fixation capabilities of the root nodule, the change in ultrastructure of the root nodule, soybean growth, and the distribution of cadmium in plants were studied. The results obtained show that the nodulation of soybean roots was greatly inhibited by the addition of Cd, especially at the addition level of 10 and 20 mg kg(-1) soil. The inhibition of plant growth, especially the root growth, increased as the cadmium concentration increased, with deleterious effects observed for the roots. The weight ratio of soybean root/leaf decreased as the Cd concentration increased, which might explain the reason for nodulation decreases. The results also indicate that N2-fixation of root nodule was stimulated to some extent at the low levels of Cd addition, but decreased sharply with further increase of the Cd concentration. High Cd levels were also associated with changes in the ultrastructure of root nodule, in which the effective N2-fixing area was reduced and the N2-fixing cells in the area also reduced. In addition, the results also reveal that the content of Cd in different parts of the plants was as follows: roots > stems > seeds, indicating that the accumulation of Cd by roots is much larger than that by any other part of the soybean plant, and might cause deleterious effects to root systems.     

锆负载型树脂用于含氟废水深度处理的研究

本文研制了一种以火力发电厂废树脂为载体的锆负载型氟离子吸附剂 ,并在评价了该树脂对氟离子的吸附性能之后探讨了该树脂用于火力发电厂含氟废水深度处理的可能性。研究结果表明 ,锆的最佳负载的最佳浓度为0 .5mol/L ,该负载树脂的最佳吸附pH为 3.0— 4 .0 ,用填充柱进行的动态实验结果表明 ,pH =3时的吸附容量显著高于 pH=4时的值。利用该树脂对火力发电厂模拟含氟废水进行了双柱串联吸附工艺处理 ,当柱流量为 35mL/min(SV10 )、第二柱穿透时 ,第一柱的吸附容量为 10 2 2 8mg/L湿树脂 ;用 0 .1mol/L的NaOH溶液进行再生 ,柱流量选择为 35mL/min(SV10 )时 ,脱附率在 95 %以上。     

PCDDs, PCDFs, and PCBs concentrations in breast milk from two areas in Korea: body burden of mothers and implications for feeding infants

We determined breast milk concentration of polychlorinated dibenzo-p-dioxins (PCDDs)/polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in 24 mothers living in Korea, and assessed the maternal body burden based on PCDDs/PCDFs and PCBs concentrations in breast milk and an infant intake rate through breast-feeding based on their concentration in breast milk. PCDDs/PCDFs and PCBs levels in breast milk from primipara mothers were found to be higher than those from multipara mothers. For total PCDDs/PCDFs TEQ level, 2,3,4,7,8-PeCDD was the predominant congener, and the proportion of 2,3,7,8-TCDD was less than 3% of total PCDDs/PCDFs TEQ level. For PCBs TEQ level, PCB-126 was the predominant congener. Maternal body burden levels of PCDDs/PCDFs and PCBs based on their concentrations in breast milk were 268-622 TEQ ng. The daily dioxin intakes of mothers were predicted to be 0.78-2.18 TEQ pg/kg/day for PCDDs/PCDFs and 0.34-0.66 TEQ pg/kg/ day for PCBs. For the first year, the body burden of an infant was predicted to be 212 TEQ ng and the daily intake of an infant was predicted to be 85 TEQ pg/kg/day, assuming the mean dioxin-related compounds concentration (27.54 TEQ pg/g fat).     

挥发性有机硫化合物释放的研究与展望

在介绍硫的生物地球化学循环的基础上，概述了几种挥发性有机硫气体ＤＭＳ，ＣＯＳ，ＭＳＨ，ＣＳ２和ＤＭＤＳ从各种自然源（主要是生物源）释放的情况，着重阐述了陆地生态系统中各种生物硫源的释放情况，列举了测定这些释放的硫通量的方法，并且对有机硫气体的大气行为及环境影响也作了论述。     

Characteristics of single atmospheric particles in a heavily polluted urban area of China: size distributions and mixing states

To investigate the chemical composition, size distribution, and mixing state of aerosol particles on heavy pollution days, single-particle aerosol mass spectrometry was conducted during 9–26 October 2015 in Xi’an, China. The measured particles were classified into six major categories: biomass burning (BB) particles, K-secondary particles, elemental carbon (EC)–related particles, metal-containing particles, dust, and organic carbon (OC) particles. BB and EC-related particles were the dominant types during the study period and mainly originated from biomass burning, vehicle emissions, and coal combustion. According to the ambient air quality index, two typical episodes were defined: clean days (CDs) and polluted days (PDs). Accumulation of BB particles and EC-related particles was the main reason for the pollution in Xi’an. Most types of particle size were larger on PDs than CDs. Each particle type was mixed with secondary species to different degrees on CDs and PDs, indicating that atmospheric aging occurred. The mixing state results demonstrated that the primary tracers were oxidized or vanished and that the amount of secondary species was increased on PDs. This study provides valuable information and a dataset to help control air pollution in the urban areas of Xi’an.

Graphical abstract

     

滦河水体溶解性有机物的综合分级表征及其混凝去除过程

天然水体溶解性有机物(DOM)是微污染物的潜在载体,是消毒副产物的主要前驱物,自身又可能成为微污染物,因此研究其内在特性和去除机理有着重要的基础性科学意义.本研究综合利用化学、物理分级方法(即树脂和超滤分级法),对中国北方典型饮用水源--滦河水体的DOM进行全面分级表征.此水体DOM基本化学分级特征是憎水酸(HoA)、亲水性物质(HiM)含量较高,且具有季节稳定性;其物理分级特征是分子量＜1 kDa及3 kDa～10 kDa的组分含量较高,也表现出一定的时间稳定性.选用工业聚合铝(PAC)研究此DOM的基本混凝特征和内在混凝机理,结果表明,强憎水部分HoA及3 kDa～10 kDa间的有机物较易被去除,而较大分子量范围10 kDa～30 kDa间的有机物去除率较低,说明混凝过程中此DOM的物理性质不起主要作用,而化学性质更为重要.特别对DOM各组分作进一步(结合)分级研究,发现HoA主要在＞10 kDa范围.＜1 kDa的有机物中主要为HiM,但其中还含有HoA和弱憎水酸(WHoA),这使特定条件下部分＜1 kDa有机物被混凝去除成为可能.另外,HoA中按分子量大小仍可分为易去除和难去除部分,但分布不连续,易去除部分在3 kDa～10 kDa和＞30 kDa区间,而其10 kDa～30 kDa部分较难去除,说明可能存在其他结构性影响因素,值得深入研究.     

新乡市镉污染土壤细菌群落组成及其对镉固定效果

重金属污染土壤中具有丰富的微生物群落组成,为生物修复提供了微生物资源.本研究以新乡市某电池厂周边Cd污染土壤为研究对象,采用高通量测序和平板分离方法分析其细菌群落组成.传统培养方法表明新乡市重金属污染土壤细菌由厚壁菌门、放线菌门、变形菌门和拟杆菌门这4个门,芽孢杆菌属、节杆菌属和根瘤菌属等30个属组成;高通量测序表明,其由变形菌门、放线菌门和酸杆菌门等25门及400属组成.相较于培养方法,高通量测序群落组成更为丰富.基于高通量测序的分子生态网路分析表明其关键细菌分别为Arthrobacter、Marmoricola、Nocardioides、Ferruginibacter、Flavitalea、Nitrospira和Lysobacter等组成.对分离的159株可培养菌株进行Cd摇瓶吸附实验,结果表明Aneurinibacillus、Arthrobacter和Bacillus等11个属的30株菌具有较好地固定效果.效果验证实验表明,Ochrobactrum sp. 1-6、Bacillus sp.2-11和Pseudomonas sp.1-9等6株高效菌株能提高青菜(鸡毛菜)生物量、降低青菜不同组织中的Cd含量.本研究为新乡市重金属污染土壤修复提供菌种资源,同时为重金属污染土壤细菌群落和功能提供参考依据.     

新型球形介孔锰锌铁氧体的制备、表征及对亚甲基蓝的吸附特性

以废旧锌锰电池生物浸提液为前驱体、聚乙烯吡咯烷酮(PVP)为结构导向剂,采用水热法制备了一种新型球形介孔锰锌铁氧体(P-MZF).同时,利用扫描电镜(SEM)、比表面积(S_(BET))、X-射线衍射(XRD)、高分辨透射电镜(HRTEM)、选区电子衍射(SAED)、红外光谱分析(FT-IR)、X射线光电子能谱分析(XPS)和磁滞回线(VSM)等表征分析了制备的材料,并研究了其对亚甲基蓝(MB)的吸附特性.结果表明,相比于无PVP制备的样品,P-MZF的比表面积S_(BET)(126.7 m~2·g~(-1))、活性点位的增加大幅提升了对MB的化学吸附能力;吸附动力学和热力学分析表明,Pseudo second-order和Langmuir模型适合描述其对MB的吸附行为.此外,经过5次循环吸附-醇洗再生,P-MZF对MB的吸附效率仍可维持在93%以上.制备的P-MZF具有高吸附和磁回收简便的优点.     

基于生物膜法磷回收工艺厌氧释磷研究

城市污水经过碳回收后的低碳源进水水质将对活性污泥法强化除磷（EBPR）工艺的运行带来困难.本研究基于生物膜法磷回收的序批式反应器（Biofilm-SBR）对低碳、低磷进水进行磷回收,在BSBR反应器好氧无碳源、厌氧低碳源投加的运行基础上,研究了该工艺在低碳模式下厌氧磷释放的关键影响因素.同时,研究了不同的碳源浓度和碳源投加方式对BSBR工艺释磷的影响.最后,分析了系统中生物膜蓄磷量的变化,并探究其与碳源消耗、释磷效果的量化关系.结果表明,该系统在好氧无碳源、厌氧仅200 mg·L^-1的碳源投加下,即可取得115 mg·L^-1（可溶性磷）的富磷回收液.系统的C_upt/P_rel（释放单位质量磷的COD消耗量）平均为（11.12±1.03）mg·mg^-1,最大蓄磷量为124 mg·g^-1.     

高温高含二氧化碳条件下五种含Cr钢适用性评价

目的 预测某高温高含二氧化碳油井中管柱的腐蚀情况,为该油井推荐安全经济的材质。方法 采用高温高压反应釜模拟现场工况进行腐蚀试验,通过失重法、扫描电子显微镜(SEM)和X射线能谱分析(EDS)对五种含Cr钢的适用性进行评价。结果 在40~160 ℃温度范围内,五种钢材随温度的升高,其均匀腐蚀速率先升高后降低,且均在80 ℃时达到最大值。3Cr钢的腐蚀速率最高,在整个温度范围内,均远高于0.076 mm/a。在温度为120 ℃时,9Cr钢开始出现局部腐蚀。在温度为160 ℃时,13Cr钢有一定的局部腐蚀倾向。S13Cr、22Cr钢在整个温度范围内的腐蚀速率都较低,试验后试样表面平整连续,耐蚀性能好。结论 建议在采出井井筒中上部40~80 ℃较低温度井段选用9Cr钢,中部80~120 ℃中高温井段选用13Cr钢,底部120~160 ℃高温井段选用S13Cr钢。