Concentrations of organic wood preservatives in wood chips produced from wood wastes

We investigated the concentrations of wood preservatives in the wood chips produced in wood-waste processing facilities in 1988, 1998–1999, and 2001–2002. Among the wood preservatives used in the past in Japan, halophenols, including PCP, chlordane, and chlorpyrifos, had comparatively high detection rates and high average concentrations in the wood chips produced in 2001–2002. Aldrin and endrin were rarely detected, and DDT was already in low concentrations in those wood chips. Although several types of wood preservative were contained in the wood chips, their concentration levels depended on the sources of the wood wastes. In chips produced from wooden pallets, wooden forms for concrete working, or wood discarded from nondemolition sources, no organochlorine wood preservatives were detected, and chlorpyrifos and chlorophenols were detected at one order of magnitude lower than the average concentrations in chips produced from wood wastes discarded in house demolitions.     

Highly efficient polishing technology for glass substrates using tribo-chemical polishing with electrically controlled slurry

The outstanding advantage of the novel polishing technology developed by the authors is a considerable reduction in cerium oxide consumption for polishing of glass substrates. This has been realized by introducing tribo-chemical polishing method along with a technique to control the movement of abrasives using an AC electric field. In this paper, we have analyzed the characteristics of the new polishing technique from the viewpoint of slurry distribution in the polishing area under various electric field conditions using a digital image processing and its influence on polishing performance using the experimental setup consisting of high speed polishing method under AC electric field. The results confirmed the increase of slurry distribution in the polishing area under appropriate AC electric field conditions and consequently led to enhanced removal rate, which was 2.5 times higher than that of the conventional CMP (chemical mechanical polishing) method. Furthermore, in spite of enhanced removal rate the surface roughness was comparable to CMP method.     

Adsorption capacity of powdered activated carbon for 3,5-dichlorophenol in activated sludge

The objectives of this study were to evaluate the performance of powdered activated carbon treatment (PACT) process based on the adsorption capacity of powdered activated carbon (PAC) in activated sludge and the effect of dissolved organic substances in activated sludge on the adsorption capacity of PAC. The DCP adsorption capacity of three PACs originated from different raw materials (coal, soft coal and sawdust) in activated sludge were 29%, 34% and 17% of that of new PAC, respectively. The performance of PACT process for shock loading of 3,5-dichlorophenol (3,5-DCP) was different among PACs in spite of the same adsorption capacity in new PAC. The performance of PACT process for removal of DCP is dependent not on the adsorption capacity of new PAC but on the adsorption capacity of PAC in the aeration tank. Dissolved organic matter (DOM) with molecular weight smaller than 50kDa did not affect the adsorption capacity of PAC for 3,5-DCP in the activated sludge reactor. DOM with molecular weight larger than 50kDa and biofilm developed on the surface of PAC seemed to be responsible for the decreased adsorption capacity of PAC for the DCP.     

Biological solubilization and mineralization as novel approach for the pretreatment of food waste

The performance of a garbage disposal system to solubilize and mineralize food wastes through biological solubilization was evaluated through the examination of the effects of operational conditions like water supply volume, water supply frequency and aeration on the amount of waste solubilized, mineralized and accumulated in the reactor. The biological solubilization process consisted of a solubilization reactor and a circulation tank. Food waste and fresh water were supplied into the solubilization reactor with support media. Wastewater from the solubilization reactor was discharged to the circulation tank and water in the circulation tank was periodically pumped back to the solubilization reactor. In case of the total food waste loading of 16 kg m(3-1) d(-1), little carbon (0-5.7%) accumulated in the reactor as long as the system was kept under aerobic condition through large volume of water supply (higher than 3.5 lh(-1)) or applying aeration in the circulation tank. However, 42% of the loaded carbon accumulated under anaerobic condition in low water supply (less than 1.8 lh(-1)). The rest of the waste was either solubilized or mineralized. The aeration in the circulation tank, therefore, was effective to provide similar solubilization and mineralization as the large volume of water supply. However, frequency of feeding at the large volume of water supply had no significant effect on the amount of waste solubilization and mineralization.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Process analysis of ozone formation under different weather conditions over the Kanto region of Japan using the MM5/CMAQ modelling system

We have assessed the contributions of individual physical and chemical atmospheric processes on ozone formation under different weather conditions during a typical summer month (August 2005) using the MM5/CMAQ modelling system. We found that the ozone episodes in the Kanto region are dominated by three major patterns, of which Patterns I and II are regular summertime pressure patterns with a 26% and 16% frequency of occurrence, respectively. A process analysis at two typical sites in the Kanto region – one located in the central region of Tokyo and the other located in the rural areas of Kanto – indicates that ozone formation is mainly controlled by advection, vertical diffusion, dry deposition, and chemical processes. The ground-level ozone concentrations are enhanced mainly by the vertical mixing of ozone-rich air from aloft, whereas the dry deposition and chemical processes mainly deplete ozone. By investigating the effects of each process under different weather conditions, we found that the significant decrease in ozone removal due to the chemical and advection processes under conditions of high stagnation is the most important cause of the enhanced levels of ozone in the central region of Tokyo. The results of this study can contribute to a better understanding of ozone formation in the Kanto region, and they may be valuable for local policy makers for further development planning.     

Properties of Poly(Vinyl Alcohol)/Chitosan Nanocomposite Films Reinforced with Oil Palm Empty Fruit Bunch Amorphous Lignocellulose Nanofibers

The objective of this study was to investigate the properties of poly(vinyl alcohol)/chitosan nanocomposite films reinforced with different concentration of amorphous LCNFs. The properties analyzed were morphological, physical, chemical, thermal, biological, and mechanical characteristics. Oil palm empty fruit bunch LCNFs obtained from multi-mechanical stages were more dominated by amorphous region than crystalline part. Varied film thickness, swelling degree, and transparency of PVA/chitosan nanocomposite films reinforced with amorphous part were produced. Aggregated LCNFs, which reinforced PVA/chitosan polymer blends, resulted in irregular, rough, and uneven external surfaces as well as protrusions. Based on XRD analysis, there were two or three imperative peaks that indicated the presence of crystalline states. The increase in LCNFs concentration above 0.5% to PVA/chitosan polymer blends led to the decrease in crystallinity index of the films. A noticeable alteration of FTIR spectra, which included wavenumber and intensity, was obviously observed along with the inclusion of amorphous LCNFs. That indicated that a good miscibility between amorphous LCNFs and PVA/chitosan polymer blend generated chemical interaction of those polymers during physical blending. Reinforcement of PVA/chitosan polymer blends with amorphous LCNFs influenced the changes of T_g (glass transition temperature), T_m (melting point temperature), and T_max (maximum degradation temperature). Three thermal phases of PVA/chitosan/LCNFs nanocomposite films were also observed, including absorbed moisture evaporation, PVA and chitosan polymer backbone structural degradation and LCNFs pyrolysis, and by-products degradation of these polymers. The addition of LCNFs 0.5% had the highest tensile strength and the addition of LCNFs above 0.5% decreased the strength. The incorporation of OPEFB LCNFs did not show anti-microbial and anti-fungal properties of the films. The addition of amorphous LCNFs 0.5% into PVA/chitosan polymer blends resulted in regular and smooth external surfaces, enhanced tensile strength, increased crystallinity index, and enhanced thermal stability of the films.     

Development of an environmentally acceptable volatile organic compounds recovery and reuse system based on vacuum spray flash with dibasic acid esters as absorbents

We used dibasic acid esters as the absorbent for a volatile organic compounds (VOC) recovery and reuse system geared mainly toward VOCs from painting and presswork. The system consists of three elements: absorption using dibasic acid esters, separation by vacuum spray flash method, and recovery by condensation. The concentration of both ethyl acetate (EtAc) and isopropyl alcohol (IPA) decreased around 90% at room temperature. Vacuum spray flash was found as a useful process for cost-effective and energy-effective VOC removal system. The difference in the dissolubility parameters (Hansen constant) between dibasic acid esters and VOCs and the boiling point of VOCs was the main contributor to the separation behavior.     

Obligate commensalism of <Emphasis Type="Italic">Curvemysella paula</Emphasis> (Bivalvia: Galeommatidae) with hermit crabs

Curvemysella paula is a markedly crescent-shaped bivalve that lives inside snail shells occupied by hermit crabs. Here, we describe the unique symbiotic life, growth pattern, and reproductive biology of this bivalve, based on specimens collected from the shallow, muddy bottom of the Seto Inland Sea, Japan. C. paula was found attached to columellae in the siphonal canal, mainly of nassariid snail shells occupied by two types of hermit crabs: Diogenes edwardsii (Diogenidae) and Spiropagurus spiriger (Paguridae). The crescent-shaped shell of C. paula is an adaptation to symbiotic life in the narrow interspace between the snail shell and the hermit-crab abdomen. C. paula is a protandric hermaphrodite. In our samples, each host snail shell harbored one (or rarely a few) large female and several males. All the female bivalves settled on the host shells with their anterior end facing outward and benefited from currents created by the hermit crab when feeding. In the muddy bottom, snail shells are a limited resource for both the hermit crabs and symbiotic bivalves. The bivalves benefit from the mobility of the hermit crabs, which prevent the shells from becoming buried in the mud. C. paula represents the only example of obligate commensalism with hermit crabs found in Bivalvia.