Characteristics of the stabilized/solidified municipal solid wastes incineration fly ash and the leaching behavior of Cr and Pb

Fly ash is a hazardous byproduct of municipal solid wastes incineration (MSWI). An alkali activated blast furnace slag-based cementitious material was used to stabilize/solidify the fly ash at experimental level. The characteristics of the stabilized/solidified fly ash, including metal leachability, mineralogical characteristics and the distributions of metals in matrices, were tested by toxic characteristic leaching procedure (TCLP), X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectrometer (SEM-EDS) respectively. Continuous acid extraction was utilized to extract metal ions and characterize their leaching behavior. The stabilization/solidification procedure for MSWI fly ash demonstrates a strong fixing capacity for the metals by the formation of C-S-H phase, hydrated calcium aluminosilicate and ettringite. The stabilized/solidified fly ash shows a dense and homogeneous microstructure. Cr is mainly solidified in hydrated calcium aluminosilicate, C-S-H and ettringite phase through physical encapsulation, precipitation, adsorption or substitution mechanisms, and Pb is mainly solidified in C-S-H phase and absorbed in the Si-O structure.     

Photochemical indicators of ozone sensitivity: application in the Pearl River Delta,China

Surface O₃ production has a highly nonlinear relationship with its precursors. The spatial and temporal heterogeneity of O₃-NO _x -VOC-sensitivity regimes complicates the control-decision making. In this paper, the indicator method was used to establish the relationship between O₃ sensitivity and assessment indicators. Six popular ratios indicating ozone-precursor sensitivity, HCHO/NO _y , H₂O₂/ HNO₃, O₃/NO _y , O₃/NO _z , O₃/HNO₃, and H₂O₂/NO _z , were evaluated based on the distribution of NO_x- and VOC-sensitive regimes. WRF-Chem was used to study a serious ozone episode in fall over the Pearl River Delta (PRD). It was found that the south-west of the PRD is characterized by a VOCsensitive regime, while its north-east is NO _x -sensitive, with a sharp transition area between the two regimes. All indicators produced good representations of the elevated ozone hours in the episode on 6 November 2009, with H₂O₂/HNO₃ being the best indicator. The threshold sensitivity levels for HCHO/NO_y, H₂O₂/HNO₃, O₃/NO _y , O₃/NO _z , O₃/HNO₃, and H₂O₂/NO _z were estimated to be 0.41, 0.55, 10.2, 14.0, 19.1, and 0.38, respectively. Threshold intervals for the indicators H₂O₂/HNO₃, O₃/NO _y , O₃/NO _z , O₃/HNO₃, and H₂O₂/NO _z were able to identify more than 95% of VOC- and NO _x -sensitive grids. The ozone episode on 16 November 16 2008 was used to independently verify the results, and it was found that only H₂O₂/HNO₃ and H₂O₂/NO _z were able to differentiate the ozone sensitivity regime well. Hence, these two ratios are suggested as the most appropriate indicators for identifying fall ozone sensitivity in the PRD. Since the species used for indicators have seasonal variation, the utility of those indicators for other seasons should be investigated in the future work.

Open image in new window

     

光照强度和盐度对塔玛亚历山大藻生长的影响

采用一次性培养方法,在3个光照强度(3 000 lx、6 000 lx、12 000 lx)和7个盐度(10、15、20、25、30、35、40)下,研究了光照强度和盐度对塔玛亚历山大藻生长的影响。结果表明:光照强度对塔玛亚历山大藻的生长有显著性影响(p 0.05),盐度对塔玛亚历山大藻的生长有极显著性影响(p 0.01),光照强度和盐度的交互作用无显著影响(p 0.05)。无论在哪一种盐度条件下,在3 000 lx、6 000 lx和12 000 lx 3种光照强度中,均以 6 000 lx时塔玛亚历山大藻的藻细胞密度值最大,生长情况最好。而无论在哪种光照条件下,7个盐度梯度中,均以盐度为30时藻细胞的密度值最大,生长状况最佳。即最适宜塔玛亚历山大藻生长的光照强度为6 000 lx,盐度为30,此条件下藻细胞达到最大密度值为 65.93104 /mL,最大生长速率为0.3679,平均生长速率为 0.1553 。     

上海市大气沉降物中多环芳烃赋存特征及其来源

以上海市大气沉降为研究对象,采集了上海市8月、9月、10月3个月的大气沉降物,分析了上海市大气沉降物中16种PAHs的质量浓度、空间分布特征和组成结构,计算了上海市8个采样点∑15PAHs大气沉降物通量.同时,采用正定矩阵因子分解(PMF)模型对大气沉降中的PAHs进行源解析,模型对PAHs的来源有较为细致的判读,结果表明:大气沉降物中∑16PAHs的浓度范围0.458~21.013μg/L,其中,溶解相中∑16PAHs的浓度范围为0.174~0.625μg/L,颗粒相中∑16PAHs的浓度范围为0.275 20.455μg/L.上海市∑15PAHs大气沉降通量在0.24~14.74μg/(m2×d)之间,沉降通量均值为2.77μg/(m2×d).根据PMF模型解析,机动车尾气排放为大气沉降物中PAHs的主要污染物,源贡献率为40.23%,其次,居民烹调、煤炭燃烧、石油挥发泄露和炼焦排放依次占23.73%、14.75%、14.35%和6.92%.     

等离子改性CNT/TiO2电极吸附去除水中苯酚的研究

利用电感耦合空气等离子体对涂覆法制备的CNT/TiO2复合电极进行射频放电改性处理.复合电极的表面形貌、润湿性及元素成分分别通过扫描电镜(SEM)、接触角测试仪、x射线光电子能谱(XPS)进行了表征.结果表明,改性后有利于苯酚吸附,电极比表面孔隙、亲水性、TiO2及含氧官能团均得以增加;循环伏安测试(CV)表明改性后电极比电容提高54%;改性后复合电极对苯酚的吸附量较改性前提高了45%.且等离子改性CNT/TiO2电极对苯酚的去除量随电压、苯酚初始浓度的增加而增加,吸附过程符合准二级动力学方程,吸附等温线符合Langmuir等温吸附模型.     

生物法合成纳米铁的研究进展

纳米铁颗粒的制备技术发展迅速,方法多种多样。生物法因其具有原料来源广,反应条件温和,产物纳米级颗粒不易团聚,以及有毒副产物少等特点,成为学者们争相研究的对象。对近几年国内外采用微生物、植物提取物等合成纳米铁材料的方法及机理进行了阐述,综述了纳米铁在环保领域的应用,并对今后深入研究生物法合成纳米铁的前景进行了展望。     

树脂基纳米零价铁复合材料的制备及其去除重金属铅Pb(Ⅱ)的性能研究

凭借着优越的还原活性,纳米零价铁在环境污染治理和修复领域应用广泛。通过将纳米零价铁(n ZVI)颗粒负载到大孔阴离子和阳离子交换树脂上,成功制备出2种树脂基纳米零价铁复合材料。研究了2种复合材料及其载体对水溶液中Pb(Ⅱ)的去除性能,考察了不同载体功能基团对复合材料去除Pb(Ⅱ)性能的影响。结果表明:以大孔阴离子交换树脂为载体的D001-Fe0复合材料因具有离子交换和化学还原双重作用,对Pb(Ⅱ)的去除效率高、速率快。     

输氧抽气技术在垃圾填埋场治理中的关键参数试验研究

输氧抽气技术是基于好氧降解原理对垃圾填埋场中固体废弃物实施原位处理的先进环保技术。采用该技术对垃圾填埋场中固体废弃物减量化研究,总结了技术应用中的关键参数:有效影响半径,最佳真空度等。结果表明抽气流量大小与影响半径密切相关,抽气影响半径建议取20~25 m,抽气系统最优负压为20 k Pa,同时在技术应用过程中应保证垃圾场表层覆盖层的密封性能,尽量减少空气的渗入。输氧抽气技术在垃圾场的成功实施为同类型场地治理提供工程技术参考。     

浅议电动葫芦定期检验周期的调整

文章根据某大型企业电动葫芦的使用现状,从设备运行、安全操作、使用成本、安全检测及相关法律法规等角度分析,论证了延长电动葫芦检验周期的可行性和必要性,提出了节约检验机构检测资源、降低企业安全监管成本,提高企业安全管理绩效的新观点。     

溶解氧对序批式全程自养脱氮工艺运行的影响

在常温22~26℃下,接种成熟的全程自养脱氮(CANON)污泥至2个相同的SBR反应器,通过设置不同的初期DO及不同的DO梯度,考察了DO控制策略及DO值对CANON工艺脱氮性能,稳定性及污泥形态的影响.结果表明,初期DO为0.05~0.10mg/L的反应器可以稳定运行,氨氮和总氮的平均去除率分别为99%和85.4%,而初期DO为(0.40±0.5)mg/L的反应器的氨氮和总氮平均去除率分别为99%和0;在反应器运行稳定之后,逐渐增加DO浓度, DO为0,0.2,0.4,0.5mg/L时的厌氧氨氧化反应速率分别为35.95,23.89,31.50,19.25mgN/(L·h),延时曝气2h后反应器仍可正常运行.在一定DO范围内,CANON反应器的活性随着DO的升高而升高,较高DO对接种初期的CANON反应器冲击较大且不可逆,对稳定运行的CANON反应器的影响较小;但是当CANON工艺稳定运行之后,短时高DO对CANON工艺的影响是可逆的.显微镜照片显示稳定运行的CANON反应器内出现了颗粒化的趋势.