亚铁添加条件下潜流湿地中氮和化学需氧量的去除效应

为了强化水平潜流人工湿地脱氮和去除化学需氧量的效果,文章利用模拟实验开展了不同浓度的亚铁(Fe~(2+))添加对其去除效果的影响研究,并初步探讨了其作用机理。研究结果表明,添加Fe~(2+)影响了水平潜流人工湿地脱氮和去除化学需氧量的能力,而且各形态的氮素和化学需氧量的去除率随水力停留时间的延长而增大。添加高浓度Fe~(2+)(≥50 mg/L)促进了湿地系统总氮和硝态氮的去除,其去除率分别超过67.7%和72.6%;而对铵态氮去除效果的影响不明显;添加低浓度Fe~(2+)(≤10 mg/L)限制了硝态氮和铵态氮的去除,而对总氮的去除效果的影响较弱。添加高浓度Fe~(2+)(≥50 mg/L)显著促进水平潜流人工湿地化学需氧量的去除,水力停留时间为24 h,其去除率均高于91%,而添加低浓度Fe~(2+)(≤10 mg/L)对促进化学需氧量的去除效果不明显,但其去除率略高于对照组,表明添加Fe~(2+)可以提高水中易降解有机物的去除能力。Fe~(2+)进入湿地系统后,水中可溶性总铁、Fe~(2+)和Fe3+浓度迅速下降,5 h后基本保持平稳,其中可溶性总铁浓度低于3.2 mg/L。添加Fe~(2+)明显降低了人工湿地出水的pH和氧化还原电位,并发生了显著变化。因此,添加适宜浓度Fe~(2+)(50 mg/L)可促进水平潜流湿地对氮素和化学需氧量的去除,可以为人工湿地强化技术研发提供理论依据。     

Optimal range of plug-in electric vehicles in Beijing and Shanghai

Both China’s national subsidy policies for plug-in electric vehicles (PEVs) purchasers and passenger cars corporate average fuel consumption and new vehicle credit regulation (dual-credit policy) favor long-range 300+ km battery electric vehicles (BEVs) and 80+ km plug-in hybrid electric vehicles (PHEVs). However, these electric vehicles tend to have lower energy efficiency and higher purchase and operation costs. Vehicle with larger batteries can also be less equitable because the subsidies are often provided to more expensive vehicles and wealthier owners. This study takes advantage of a novel dataset of daily driving data from 39,854 conventional gasoline vehicles in Beijing and 4999 PHEVs in Shanghai to determine the optimal range of BEVs and PHEVs within their respective cities. We simulate a model to explore ranges with which PEVs emit less GHGs than that of a baseline hybrid and conventional gasoline vehicle while ensuring that all daily travel demands are met. Our findings indicate that in both cities, the optimal ranges to balance cost and travel demand for BEVs are 350 km or less and for PHEVs are 60 km or less in Beijing and 80 km or less in Shanghai. We also find that to minimize carbon dioxide (CO₂) emissions, the ranges are even lower 10 km in Beijing and 30 km in Shanghai. Our study suggests that instead of encouraging long-range PEVs, governments should subsidize PEV models with shorter ranges. Parallel efforts should also be made to both increase renewable energy over fossil fuels and expand charging facilities. Although individual mobility demand varies, the government could reduce occasional long-distance driving by subsidizing alternative transportation choices. Providing week-long driving trials to consumers before their purchases may help decrease the demand of very long range PEVs by alleviating the range anxiety through a learning process.

     

漆酶降解有机污染物的研究进展

文章综述了漆酶的来源及性质、催化氧化机制、催化氧化有机物的作用方式及影响其活性的因素,并分析了其在有机污物染治理方面的应用现状。综合国内外研究现状,开发新型的漆酶磁性纳米固定化材料及构建高效产漆酶基因工程菌是实现漆酶工业化应用的重要研究方向。     

机载产品盐雾试验结果评定判据分析与探讨

针对当前机载产品盐雾试验标准中缺少明确、可量化评估指标,试验结果评定判据粗略笼统且以定性评价为主,已不能满足产品发展和使用环境扩展需求等现状,在总结国内外现行盐雾试验标准的结果评定要求基础上,分析当前机载产品盐雾结果评定判据存在的问题与不足,从管理和技术两个层面提出改进试验结果评定可操作性的建议,指导机载产品盐雾试验实施与评价。     

碳量子点掺杂氮化碳提高的光电化学阴极保护性能研究

目的研究g-C_3N_4/C-Dots-M复合材料的光电化学阴极保护性能。方法采用X射线衍射(XRD)、扫描电子显微镜(SEM)和紫外可见漫反射光谱技术对样品的晶体结构、微观形貌和光吸收性能进行表征。通过电化学测试可见光照射下g-C_3N_4/C-Dots-M复合材料光电极偶联316L不锈钢后的光电化学阴极保护电流密度和电位变化曲线,研究材料的光电化学阴极保护性能。结果可见光照射下,该偶联体系的光致混合电位下降至-0.43 V(vs. Ag/AgCl),光电化学阴极保护电流密度达到4.3μA/cm。结论得益于碳量子点优异的电子传导特性,g-C_3N_4/C-Dots-550复合材料的光电化学阴极保护性能比纯g-C_3N_4的明显增强。该复合材料在光电化学阴极保护方面展现了较大的应用潜力。     

DZ125合金HY3包覆型涂层退除研究

目的 研究化学法退除DZ125合金HY3包覆型涂层。方法 采用真空电弧镀技术（AIP）在定向凝固镍基高温合金DZ125上制备包覆型涂层HY3,利用化学方法完全退除基体上的涂层,通过失重法研究对比1#和2#退除溶液退除HY3涂层和DZ125合金的退除速率,采用扫描电镜（SEM）对退除后的HY3涂层和DZ125基体的微观组织进行观察。结果 经过100 min,2#溶液可以将20 ?m左右的HY3涂层完全退除,采用1#溶液需要超过100 min才能完全退除涂层。两种对DZ125合金的腐蚀性很小,对于同一种合金而言,1#溶液和2#溶液对合金的腐蚀速率比值为1︰13。在1#溶液中,合金与涂层腐蚀速率的比值为1︰87.65;在2#退除溶液中,合金与涂层腐蚀速率的比值为1︰6.81。结论 1#溶液更加适合退除DZ125合金上的HY3涂层。