The viability of professional wet cleaning as a pollution prevention alternative to perchloroethylene dry cleaning

The vast majority of dry cleaners worldwide use the toxic chemical perchloroethylene (PCE), which is associated with a number of adverse health and environmental impacts. Professional wet cleaning was developed as a nontoxic alternative to PCE dry cleaning but has not been widely adopted as substitute technology. In the greater Los Angeles, CA, region, a demonstration project was set up to showcase this technology and evaluate its commercial viability by converting seven cleaners from PCE dry cleaning to professional wet cleaning. The demonstration site cleaners who switched to professional wet cleaning were able to maintain their level of service and customer base while lowering operating costs. The cleaners were able to transition to professional wet cleaning without a great degree of difficulty and expressed a high level of satisfaction with professional wet cleaning. Crucial to this success was the existence of the demonstration project, which helped to develop a supporting infrastructure for professional wet cleaning that had otherwise been lacking in the garment care industry.     

Bird‐community responses to habitat creation in a long‐term,large‐scale natural experiment

Ecosystem function and resilience are compromised when habitats become fragmented due to land‐use change. This has led to national and international conservation strategies aimed at restoring habitat extent and improving functional connectivity (i.e., maintaining dispersal processes). However, biodiversity responses to landscape‐scale habitat creation and the relative importance of spatial and temporal scales are poorly understood, and there is disagreement over which conservation strategies should be prioritized. We used 160 years of historic post‐agricultural woodland creation as a natural experiment to evaluate biodiversity responses to habitat creation in a landscape context. Birds were surveyed in 101 secondary, broadleaf woodlands aged 10–160 years with ≥80% canopy cover and in landscapes with 0‐17% broadleaf woodland cover within 3000 m. We used piecewise structural equation modeling to examine the direct and indirect relationships between bird abundance and diversity, ecological continuity, patch characteristics, and landscape structure and quantified the relative conservation value of local and landscape scales for bird communities. Ecological continuity indirectly affected overall bird abundance and species richness through its effects on stand structure, but had a weaker influence (effect size near 0) on the abundance and diversity of species most closely associated with woodland habitats. This was probably because woodlands were rapidly colonized by woodland generalists in ≤10 years (minimum patch age) but were on average too young (median 50 years) to be colonized by woodland specialists. Local patch characteristics were relatively more important than landscape characteristics for bird communities. Based on our results, biodiversity responses to habitat creation depended on local‐ and landscape‐scale factors that interacted across time and space. We suggest that there is a need for further studies that focus on habitat creation in a landscape context and that knowledge gained from studies of habitat fragmentation and loss should be used to inform habitat creation with caution because the outcomes are not necessarily reciprocal.     

Study of spatial and temporal distribution of antimicrobial in water and sediments from caging fish farms by on-line SPE-LC-MS/MS

An on-line solid phase extraction liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) method for the determination of 12 antimicrobials in sediment and surface water was developed and validated. Furthermore, the spatial and temporal antimicrobials distributions in the sediment and in the water of four fish farms located in the hydroelectric dam of Ilha Solteira Reservoir in Brazil were investigated over four seasons in three sampling sites: at the fish cages, 100 and 1,000 m downstream far from the cages. The method was performed using an Agilent Zorbax 80 SB-C8 column (9.4 × 15 mm, 5 µm) as the loading column, and the Agilent Zorbax Eclipse Plus C18 column (3.0 × 100 mm, 3.5 µm) as a separation column within a run time of 13 min. The limits of quantification were less than 9 ng·L^?1 for the antibiotics in water and 16 µg·kg^?1 in sediment; the recovery ranged from 80 to 119%, with a variation coefficient less than 11%, and the repeatability was lower than 15%. Oxytetracycline was found in the water in all sample seasons. However, florfenicol was identified in April and October 2013 and January 2014, and tetracycline was present in July 2013. Regarding the sediment, oxytetracycline and tetracycline were found in all sampling periods, but chlortetracycline was only identified in January 2014. The spatial distribution of antimicrobials showed that the main pollution source came from the fish farms. This study demonstrated that the proposed method is reliable for the monitoring of antimicrobials in water and sediments and it showed contamination in both matrices from Ilha Solteira Reservoir.     

Trace element concentrations in tree rings as indicators of environmental pollution

Proton induced X-ray emission spectroscopy has been successfully used to measure variations in relative and absolute trace element concentration levels in tree rings. Valuable information on past concentration levels, stored in the tree rings have been obtained. Peaks associated with 15 elements have been identified in all X-ray spectra. Variations of trace elements levels in the tree rings reflect the variations in their availability from the environment.     

Determination of dimethyl fumarate (DMFu) in silica gel pouches using gas chromatography coupled ion trap mass spectrometry

A simple method for the determination of dimethyl fumarate (DMFu) in silica gel pouches has been developed. The gas chromatographic behaviour of DMFu was investigated; the instrumental method, based on EI mass spectrometry coupled with an Ion Trap Detector operating whether in full scan mode or in MS/MS mode was also investigated. Several factors have been evaluated and optimized during the development process: solvent and temperature of extraction, type of stationary phase in capillary column. The analytical procedure consists of two steps as follows: (a) the sample preparation using 10 g of sample extracted with acetonitrile in an ultrasonic, heated bath and (b) the determination by gas chromatography-ion trap mass spectrometry. Mass spectrometry in conjunction with chromatographic separation is a very powerful combination for identification of an analyte in the extract in spite of selective detectors employed with GC, such as ECD, FPD and NPD, that offer only limited specificity. Blank samples show no interfering peaks in the areas of interest, so the specificity of the method was assured under the investigated GC/MS conditions. The method has been validated in terms of recovery, repeatability, linearity, detection limits and measurement uncertainty. The results obtained meet both the method validation criteria and requirements of the European/National legislation. The method was verified to be accurate with 97 % mean recoveries at 0.05 mg/kg and 1.00 mg/kg levels; the repeatability (expressed as RSD %) was found to be better than 15 %. Good linearity was found in the range between 0.05 μg/mL and 5.0 μg/mL and a value of R2 > 0.9998 was calculated. The procedure ensures high specificity and a good sensitivity with detection limit (ld) of 0.02 mg/kg and quantification limit (LOQ) of 0.05 mg/kg. This procedure has been successfully applied for the analysis of several hundred of real samples collected during a monitoring control plan started last year in our country. All samples exceeding the maximum allowed level of DMFu (0, 1 mg/kg) were confirmed by GC/MS/MS (ITD) for a higher degree of confidence in identification. The main advantages of this method include: rapidity, simplicity (few, simple steps), reliability, cheapness, no need for long and difficult clean-up and evaporation steps, high specificity by using GC/MS and GC/MS/MS, availability for routine monitoring.     

The need to implement an efficient biomass fractionation and full utilization based on the concept of “biorefinery” for a viable economic utilization of microalgae

In the present work, microalgae strains, such as Scenedesmus obliquus and Phaeodactylum tricornutum grown in indoor/outdoor photobioreactors (PBRs) and in open ponds (this is the first study on such strains cultivated in the local Southern Italy climatic conditions), were fully analyzed for their protein content, carbohydrates, lipids, and fatty acid profile in order to assess their potential use for the production of biofuels, chemicals, and omega-3, and as animal feed and human food. They are compared with Nannochloropsis sp. (commercial sample) which was fully analyzed in our laboratory and Chlorella (literature data). An economic evaluation was carried out, demonstrating that the cultivation of microalgae for the production of only biofuels will not match the economic standards. Conversely, if chemicals are also produced applying the biorefinery concept and using wastewater as a source of nutrients, it will be possible to have a good positive return from microalgae.     

Recovery of different waste vegetable oils for biodiesel production: A pilot experience in Bahia State,Brazil

In Brazil, and mainly in the State of Bahia, crude vegetable oils are widely used in the preparation of food. Street stalls, restaurants and canteens make a great use of palm oil and soybean oil. There is also some use of castor oil, which is widely cultivated in the Sertão Region (within the State of Bahia), and widely applied in industry. This massive use in food preparation leads to a huge amount of waste oil of different types, which needs either to be properly disposed of, or recovered. At the Laboratorio Energia e Gas-LEN (Energy & Gas lab.) of the Universidade Federal da Bahia, a cycle of experiments were carried out to evaluate the recovery of waste oils for biodiesel production. The experiences were carried out on a laboratory scale and, in a semi-industrial pilot plant using waste oils of different qualities. In the transesterification process, applied waste vegetable oils were reacted with methanol with the support of a basic catalyst, such as NaOH or KOH. The conversion rate settled at between 81% and 85% (in weight). The most suitable molar ratio of waste oils to alcohol was 1:6, and the amount of catalyst required was 0.5% (of the weight of the incoming oil), in the case of NaOH, and 1%, in case of KOH.The quality of the biodiesel produced was tested to determine the final product quality. The parameters analyzed were the acid value, kinematic viscosity, monoglycerides, diglycerides, triglycerides, free glycerine, total glycerine, clearness; the conversion yield of the process was also evaluated.     

A dynamic optimization model for solid waste recycling

Recycling is an important part of waste management (that includes different kinds of issues: environmental, technological, economic, legislative, social, etc.). Differently from many works in literature, this paper is focused on recycling management and on the dynamic optimization of materials collection. The developed dynamic decision model is characterized by state variables, corresponding to the quantity of waste in each bin per each day, and control variables determining the quantity of material that is collected in the area each day and the routes for collecting vehicles. The objective function minimizes the sum of costs minus benefits. The developed decision model is integrated in a GIS-based Decision Support System (DSS). A case study related to the Cogoleto municipality is presented to show the effectiveness of the proposed model. From optimal results, it has been found that the net benefits of the optimized collection are about 2.5 times greater than the estimated current policy.