Novel two-step vapor-phase synthesis of UV–Vis light active Fe2O3/WO3 nanocomposites for phenol degradation

Supported Fe₂O₃/WO₃ nanocomposites were fabricated by an original vapor phase approach, involving the chemical vapor deposition (CVD) of Fe₂O₃ on Ti sheets and the subsequent radio frequency (RF)-sputtering of WO₃. Particular attention was dedicated to the control of the W/Fe ratio, in order to tailor the composition of the resulting materials. The target systems were analyzed by the joint use of complementary techniques, that is, X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), and optical absorption spectroscopy. The results showed the uniform decoration of α-Fe₂O₃ (hematite) globular particles by tiny WO₃ aggregates, whose content could be controlled by modulations of the sole sputtering time. The photocatalytic degradation of phenol in the liquid phase was selected as a test reaction for a preliminary investigation of the system behavior in wastewater treatment applications. The system activity under both UV and Vis light illumination may open doors for further material optimization in view of real-world end-uses.

     

Ecotoxicological effects of sediments from Mar Piccolo,South Italy: toxicity testing with organisms from different trophic levels

The Mar Piccolo of Taranto (Ionian Sea, Southern Italy) is a semi-enclosed and strongly polluted basin. For decades, it has been subjected to different anthropogenic impacts. These stressors caused severe sediments contamination with high concentration of different pollutants (PAHs, PCB, heavy metals). In order to assess the current status of sediments contamination, an ecotoxicological investigation combined with chemical analysis (heavy metals, PAH, and PCB) has been performed. In order to derive ecologically relevant conclusions, a multiorganisms and multiend-points approach has been applied, exposing organisms from different trophic levels to elutriate and whole sediment. The battery of bioassays consists of a microalgal growth inhibition test (Dunaliella tertiolecta), acute and sublethal assays (end-points: mortality, immobilization and swimming speed alteration) on crustaceans larvae and juveniles, and rotifers (Amphibalanus amphitrite, Artemia salina, Corophium insidiosum and Brachionus plicatilis), and embryotoxicity test on echinoderms (Paracentrotus lividus). Considering the high levels of sediment contamination highlighted from chemical analysis, an unexpected very low toxic effect was observed, even considering the sublethal end-point (larval swimming speed alteration). The results of this study suggest a very complex contaminants dynamic in the Mar Piccolo sediments that, despite a strong level of contamination, seems to not affect in a proportional manner the biological compartment.     

Assessment of the applicability of a “toolbox” designed for microbially assisted phytoremediation: the case study at Ingurtosu mining site (Italy)

The paper describes the fieldwork at the Italian test site of the abandoned mine of sphalerite and galena in Ingurtosu (Sardinia), with the aim to assess the applicability of a “toolbox” to establish the optimized techniques for remediation of soils contaminated by mining activities. A preliminary characterization—including (hydro)geochemistry, heavy metal concentration and their mobility in soil, bioprospecting for microbiology and botany—provided a data set for the development of a toolbox to deliver a microbially assisted phytoremediation process. Euphorbia pithyusa was selected as an endemic pioneer plant to be associated with a bacterial consortium, established with ten selected native strains, including metal-tolerant bacteria and producers of plant growth factors. The toolbox was firstly assessed in a greenhouse pot experiment. A positive effect of bacterial inoculum on E. pithyusa germination and total plant survival was observed. E. pithyusa showed to be a well-performing metallophyte species, and only inoculated soil retained a microbial activity with a high functional diversity, expanding metabolic affinity also towards root exudates. These results supported the decision to proceed with a field trial, investigating different treatments used singly or in combination: bioaugmentation with bacterial consortia, mycorrhizal fungi and a commercial mineral amendment. Microbial activity in soil, plant physiological parameters and heavy metal content in plants and in soil were monitored. Five months after the beginning, an early assessment of the toolbox under field conditions was carried out. Despite the cold season (October–March), results suggested the following: (1) the field setup as well as the experimental design proved to be effective; (2) plant survival was satisfactory; (3) soil quality was increased and bioaugmentation improved microbial activity, expanding the metabolic competences towards plant interaction (root exudates); and (4) multivariate analysis supported the data provided that the proposed toolbox can be established and the field trial can be carried forward.     

Study of the SRF-derived ashes melting behavior and the effects generated by the optimization of their composition on the furnaces energy efficiency in the incineration plants

As regards the incineration process of the urban solid waste, the composition correct management allows not only the valorization of precise civil and industrial groups of waste as alternative fuels but also a considerable increase of the furnace work temperature leading to a remarkable improvement of the related energy efficiency. In this sense, the study of the melting behavior of ashes deriving from several kinds of fuels that have to be processed to heat treatment is really important. This approach, indeed, ensures to know in depth the features defining the melting behavior of these analyzed samples, and as a consequence, gives us the necessary data in order to identify the best mixture of components to be incinerated as a function of the specific working temperatures of the power plant. Firstly, this study aims to find a way to establish the softening and melting temperatures of the ashes because they are those parameters that strongly influence the use of fuels. For this reason, in this work, the fusibility of waste-derived ashes with different composition has been investigated by means of the heating microscope. This instrument is fundamental to prove the strict dependence of the ashes fusion temperature on the heating rate that the samples experienced during the thermal cycle. In addition, in this work, another technological feature of the instrument has been used allowing to set an instantaneous heating directly on the sample in order to accurately reproduce the industrial conditions which characterize the incineration plants. The comparison between the final results shows that, in effect, the achievement of the best performances of the furnace is due to the a priori study of the melting behavior of the single available components.     

Quaternary geographical sibling speciation and population structuring in the Eastern Atlantic skates (suborder Rajoidea) Raja clavata and R. straeleni

The European Raja clavata and the South African R. straeleni are marine skates which exhibit highly conserved morphological and ecological traits. Owing to this, taxonomic and evolutionary relationships between the two taxa have not yet fully elucidated. Here, we have tested the hypothesis that restricted gene flow and genetic divergence between these taxa might be associated with climatic/oceanographic discontinuities by surveying genetic variation in ten geographical samples at control region (CR) and amplified fragment length polymorphism (AFLP) loci. The clustering of CR haplotypes in two reciprocally monophyletic clades consistent with taxon zoogeography and the significant AFLP F values between the European and South African populations indicated the two taxa as recently diverged peripatric sibling species. Within each species, significant spatial genetic heterogeneity among samples at both markers revealed population structuring. We argued that structured populations and isolated sibling species might represent two stages of geographical speciation.     

Comparison of PM10 concentrations and metal content in three different sites of the Venice Lagoon: An analysis of possible aerosol sources

The Venice Lagoon is exposed to atmospheric pollutants from industrial activities, thermoelectric power plants, petrochemical plants, incinerator, domestic heating, ship traffic, glass factories and vehicular emissions on the mainland. In 2005, construction began on the mobile dams (MOSE), one dam for each channel connecting the lagoon to the Adriatic Sea as a barrier against high tide. These construction works could represent an additional source of pollutants. PM₁₀ samples were taken on random days between 2007 and 2010 at three different sites: Punta Sabbioni, Chioggia and Malamocco, located near the respective dam construction worksites. Chemical analyses of V, Cr, Fe, Co, Ni, Cu, Zn, As, Mo, Cd, Sb, Tl and Pb in PM₁₀ samples were performed by Inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS) and results were used to identify the main aerosol sources. The correlation of measured data with meteorology, and source apportionment, failed to highlight a contribution specifically associated to the emissions of the MOSE construction works. The comparison of the measurements at the three sites showed a substantial homogeneity of metal concentrations in the area. Source apportionment with principal component analysis (PCA) and positive matrix factorization (PMF) showed that a four principal factors model could describe the sources of metals in PM₁₀. Three of them were assigned to specific sources in the area and one was characterised as a source of mixed origin (anthropogenic and crustal). A specific anthropogenic source of PM₁₀ rich in Ni and Cr, active at the Chioggia site, was also identified.     

Biologic impact on the coastal belt of the province of Venice (Italy,Northern Adriatic Sea): preliminary analysis for the characterization of the bathing water profile

Background, aim and scope  

This paper presents a preliminary study of the water profile with reference to microbiological parameters, required by Directive 2006/07/EC (European Community 2006) concerning the management of bathing water quality, in the coastal belt of the Province of Venice (Italy, Northern Adriatic Sea). A historical database has been implemented with monitoring data for the period 2000–2006 (data on rivers, bathing and marine coastal waters and on the characterization of Wastewater Treatment Plant (WWTP) discharges) from the institutional activity of Veneto Regional Environmental Prevention and Protection Agency (ARPAV). An integrated areal analysis for the microbiological investigation of homogeneous stretches along the coast of the Province of Venice was performed for a preliminary characterization of the bathing water profile considering water quality status and existing pressure sources.     

Alkali activation processes for incinerator residues management

Incinerator bottom ash (BA) is produced in large amount worldwide and in Italy, where 5.1 millions tons of municipal solid residues have been incinerated in 2010, corresponding to 1.2–1.5 millions tons of produced bottom ash. This residue has been used in the present study for producing dense geopolymers containing high percentage (50–70 wt%) of ash. The amount of potentially reactive aluminosilicate fraction in the ash has been determined by means of test in NaOH. The final properties of geopolymers prepared with or without taking into account this reactive fraction have been compared. The results showed that due to the presence of both amorphous and crystalline fractions with a different degree of reactivity, the incinerator BA geopolymers exhibit significant differences in terms of Si/Al ratio and microstructure when reactive fraction is considered.     

Coltan from Central Africa,international trade and implications for any certification

The exploitation of coltan in Central Africa can be considered a case of conflict minerals due to its nature. Many international organizations and bodies, national governments and private sector organizations seek to address this conflict, in particular via transparency, certification and accountability along the material supply chain. This paper analyses the international trade dimension of coltan and gives evidence on the dimension of illicit trade of coltan. The authors start from the hypothesis that illicit trade of coltan sooner or later will enter the market and will be reflected in the statistics. The paper is structured in the following manner: first, a short section gives a profile of coltan production and markets; second, an overview of the mining situation in the Democratic Republic of Congo (DRC) and related actors. The third section addresses mechanisms, actors and measurement issues involved in the international trade of coltan. The final part draws lessons for certification and conflict analysis and offers some guidance for future research.