Assessment of microbiological indoor air quality in an Italian office building equipped with an HVAC system

The purpose of this study was to evaluate the level and composition of bacteria and fungi in the indoor air of an Italian office building equipped with a heating, ventilation and air conditioning (HVAC) system. Airborne bacteria and fungi were collected in three open-space offices during different seasons. The microbial levels in the outdoor air, supply air diffusers, fan coil air flow and air treatment unit humidification water tank were used to evaluate the influence of the HVAC system on indoor air quality (IAQ). A medium–low level of bacterial contamination (50–500 CFU/m³) was found in indoor air. Staphylococcus and Micrococcus were the most commonly found genera, probably due to human presence. A high fungal concentration was measured due to a flood that occurred during the winter. The indoor seasonal distribution of fungal genera was related to the fungal outdoor distribution. Significant seasonal and daily variation in airborne microorganisms was found, underlining a relationship with the frequency of HVAC system switching on/off. The results of this monitoring highlight the role of the HVAC system on IAQ and could be useful to better characterise bacterial and fungal population in the indoor air of office buildings.     

Application of semipermeable membrane device (SPMD) to assess air genotoxicity in an occupational environment

Semipermeable membrane device (SPMD) is a passive sampler that sequesters lipophilic contaminants, mimicking the bioconcentration in the fatty tissue of organisms. This study was designed to assess the use of SPMD and biological tests (Comet assay and Ames test) for air monitoring. For this purpose an occupational environment with expected polycyclic aromatic hydrocarbons (PAHs) contamination (coke plant) was selected for a case study. The SPMDs were deployed in five occupational contaminated sites and in a control site. The SPMD dialysates were chemically analysed and examined for in vitro DNA-damaging activity in human cells (Jurkat) by Comet assay and for mutagenicity with the Ames test (TA98 strain, w/o S9). Total suspended particulates were also collected and analysed (GC–MS). No biological effect of SPMD extract was revealed in the control site. On the other hand, air samples collected with SPMDs within the coke plant showed variable degrees of genotoxic and mutagenic activity. The highest effects were associated with the highest PAH level recovered in the SPMDs extracts and in particulate samples.Results obtained support the sensitivity of biological tests associated to SPMD sampling for evaluating the health risk of potentially contaminated work environments highlighting the usefulness of SPMDs for environmental air quality monitoring.     

Introduction to the Issue

We are pleased to introduce this second issue of the Reviewof Environmental Economics and Policy. Like every issue, thisone includes several articles, a focused symposium, and a setof regular features. In the first of three articles, John Graham describes "The EvolvingRegulatory Role of the U.S. Office of Management and Budget,"where he was the "regulatory czar" as administrator of the Officeof Information and Regulatory Affairs (OIRA) from 2001 to 2006.In his essay, Graham responds to the perception of OMB as antiregulatoryby describing the history of OIRA's proactive     

Polychlorinated biphenyls in two salt marsh sediments of the Venice Lagoon

Polychlorinated biphenyls (PCBs) were measured in two dated salt marsh cores of the Venice Lagoon to assess their input chronology and to evaluate the importance of atmospheric deposition as a source. Sampling sites were chosen in order to evidence the differences between areas located leeward and windward with respect to inputs originating in both the city of Venice and the industrial area. Concentrations of PCB indicators (0.13-15.6 ng g?1) increased gradually from the 1930s, reached maxima from the 1950s to the late 1970s, and then decreased. PCB loadings to marshes are driven by both the atmospheric deposition and the resuspension of subtidal sediments, this latter being more important for heavier congeners. The downwind marsh recorded higher fluxes (0.06-9.72 ng cm?2 year?1) than the upwind one (0.01-0.53 ng cm?2 year?1). Recent fluxes are rather consistent with bulk deposition measurements. A higher contribution of CB-101 and CB-118 was detected in the intermediate layers of the downwind site, suggesting a different PCB source for the corresponding time interval. In the other marsh, PCBs showed a rather constant composition at all levels (mostly CB-153, CB-138 and CB-180), accounting for a regional influence. Deep layers showed an enrichment of higher chlorinated congeners at both sites, whereas recent samples conserve the patterns typical of surficial and subsurficial subtidal sediments. The scientific approach adopted in this research can be considered as a sort of methodological procedure for the determination of fluxes and pathways of PCBs through the study of marsh cores.     

Decentralized management of sewage using septic tanks and anaerobic filters and its potential to comply with required standards in a developing country: a case study in Brazil

Environmental Science and Pollution Research - To investigate the feasibility of implementing decentralized sewage treatment systems aiming to meet environmental standards, the performance of three...     

WARM: a European model for energy and environmental analysis

This paper describes the structure of a newly developed econometric, imperfectly competitive, general equilibrium model for the medium term study of energy and environmental problems. The geographical coverage of the model regards twelve European countries as well as the European Union as a whole. Compared to existing quantitative E3 (economy-energy-environment) models, the WARM model is characterized by a few novel and relevant features Firstly, in contrast to multicountry interlinked models, it copes with the international dimension by integrating differences from a common European denominator within a unified and homogeneously designed framework. A panel data estimation approach is used to achieve this objective. Secondly, in contrast to the traditional market-based philosophy of many econometric models, it adopts a perspective focused upon economic agents' decisions. Thirdly, in contrast with the practice of modelling technical progress as an exogenous and deterministic phenomenon, it incorporates an explicit attempt of modelling the sources and effects of endogenous technical change. A Kalman filter latent variable approach is the methodology from which statistical information on the dynamics of technical progress can be obtained. Finally, all markets in the model are imperfectly competitive, including the labour market where the wage bargaining process is explicitly modelled and estimated. This last feature is especially important in view of the European unemployment problem.     

Human Capital,Innovation, and Climate Policy: an Integrated Assessment

This paper looks at the interplay between human capital and innovation when climate and educational policies are implemented. Following recent empirical studies, human capital and general purpose research and development (R&D) are introduced in an integrated assessment model used to study the dynamics of climate change mitigation. Our results suggest that climate policy stimulates general purpose as well as clean R&D but reduces the incentive to invest in human capital formation. Both innovation and human capital have a scale effect, which increases pollution, as well as a technique effect, which saves emissions for each unit of output produced. While the energy-saving effect prevails when innovation increases, human capital is pollution-using, also because of the gross complementarity between the labor and energy input. When the role of human capital is the key input in the production of general purpose and energy knowledge is accounted for, the crowding-out of education induced by climate policy is mitigated, though not completely offset. By contrast, a policy mix that combines educational as well as climate objectives offsets the human capital crowding-out, at moderate and short-term costs. Over the long run, the policy mix leads to global welfare gains.     

Polychlorinated biphenyls in sediments of the Venice Lagoon

Twenty-four surficial sediment samples, representing different environments within the Venice Lagoon, were analyzed for polychlorinated biphenyls (PCBs) in order to assess degrees of pollution, sources, areal distribution, and potential risk for the environment. Concentrations in surficial sediments range from 2 to more than 2049 microg kg(-1) dw. The maximum is probably due to the discharge of industrial wastes into the Brentella Canal, within the first Industrial Area. Lagoon samples are 11-205 times less contaminated, being influenced by pollutants stored in the canals only occasionally. Congener profiles distinguish PCBs in two main categories. The baseline pollution is probably due to a variety of sources within the lagoon system, whereas less chlorinated PCBs were discharged into the Brentella Canal. Our estimates suggest that, due to high concentrations, toxic equivalents (TEQs) of PCBs are comparable to those relative to PCDD/Fs for the least contaminated samples, whereas they are lower in case of heavy PCDD/F contamination.