Respiration of the eggs of the giant cuttlefish Sepia apama

On the roofs of subtidal crevices, the giant cuttlefish (Sepia apama) of southern Australia lays clutches of lemon-shaped eggs which hatch after 3 to 5 mo. Diffusion of oxygen through the capsule and chorion membrane to the perivitelline fluid and embryo was modelled using the equation V˙ _O2 = G _O2(P _O2out−P _O2in), where V˙ _O2 = rate of oxygen consumption, G _O2 = oxygen conductance of the capsule, and P _O2 values = oxygen partial pressures across the capsule. During development, V˙ _O2 rose exponentially as the embryo grew, reaching 5.5 μl h⁻¹ at hatching. Throughout development, the capsule dimensions enlarged by absorption of water into the perivitelline space, increasing G _O2 by a combination of increasing surface area, and decreasing thickness of the capsule. These processes maintained P _O2in high enough to allow unrestricted V˙ _O2 until shortly before hatching. Diffusion limitation of respiration in hatching-stage embryos was demonstrated by (1) increased embryonic V˙ _O2 when P _O2out was experimentally raised, (2) greater V˙ _O2 of resting individuals immediately after hatching, and (3) reduced V˙ _O2 of hatchlings at experimental P _O2 levels higher than P _O2in before hatching. Thus, low P _O2in may be the stimulus to hatch. Potential problems of diffusive gas-exchange are mitigated by the relatively low incubation temperature (12 °C), which may be a factor limiting the distribution of the species to cool, southern waters. Received: 14 August 1999 / Accepted: 24 January 2000     

Interlaboratory evaluation of an extraction and fluorescence method for the determination of trace beryllium in soils

Analytical methods for the determination of trace beryllium in soils are needed so that anthropogenic sources of this element can be distinguished from native (background) levels of beryllium. In this work, a collaborative interlaboratory evaluation of a new extraction and fluorescence-based procedure for determining beryllium in soil samples was carried out to fulfil method validation requirements for ASTM International voluntary consensus standard test methods. A Canadian reference material, CCRMP Till-1 soil, with a background beryllium concentration of 2.4 microg g(-1), was selected for study. This certified reference material (CRM) was spiked and homogenized with varying levels of beryllium oxide in order to give batches of material with beryllium concentrations of 4.36 +/- 0.69, 11.5 +/- 0.7, 124 +/- 7 and 246 +/- 16 microg g(-1) (+/- values are standard deviations). In the interlaboratory study (ILS), which was carried out in accordance with an applicable ASTM International standard practice (ASTM E691), samples of these spiked soils were subjected to extraction in dilute ammonium bifluoride at approximately 90 degrees C for 40 h. Fluorescence measurement of the extracted beryllium was carried out via detection using the high quantum yield fluorophore, hydroxybenzoquinoline sulfonate (HBQS). Interlaboratory precision estimates from six participating laboratories ranged from 0.048 to 0.103 (relative standard deviations) for the five different beryllium concentrations. Pooled bias estimates resulting from this ILS were between -0.049 and 0.177 for the various beryllium levels. These figures of merit support promulgation of the analytical procedure as an ASTM International standard test method.     

A spatial analysis of pit latrine density and groundwater source contamination

This study aims to assess the relationship between chemical and microbial contamination of groundwater sources and a range of potential hazards in two peri-urban areas of Kisumu, Kenya where shallow wells and pit latrines are widely used. From 1998 to 2004, 263 samples were taken from 61 groundwater sources and tested for thermotolerant coliforms. Eighteen of these sources were also tested for chemical contaminants, including nitrate, chloride and fluoride. The locations of all water sources, buildings and pit latrines in the study area were surveyed. Local pit latrine densities were calculated using a geographic information system. Ten out 18 samples were above the World Health Organization guideline values for nitrate, 236 out of 263 were positive for thermotolerant coliforms, and all were above the guideline values for fluoride. There was neither a relationship between thermotolerant coliform levels and daily rainfall patterns nor with sanitary risk inspection scores for samples from shallow wells (r?=?0.01, p?=?0.91, n?=?191). The density of pit latrines within a 100-m radius was significantly correlated with nitrate and chloride levels (r?=?0.64, p?=?0.004 and r?=?0.46, p?=?0.05, respectively) but not with thermotolerant coliforms (r?=?0.22, p?=?0.11). These results illustrate both the public health risks associated with shallow groundwater sources, on-site sanitation and high population density. These findings have implications for current policies that promote latrine construction, especially in peri-urban areas of high population density. More comprehensive studies of larger communities should be commissioned to extend this analysis of the links between latrine density and groundwater contamination and so identify the contingent policy risks.     

From population sources to sieves: the matrix alters host-parasitoid source-sink structure

Field experiments that examine the impact of immigration, emigration, or landscape structure (e.g., the composition of the matrix) on the source sink dynamics of fragmented populations are scarce. Here, planthoppers (Prokelisia crocea) and egg parasitoids (Anagrus columbi) were released among host-plant patches that varied in structural (caged, isolated, or in a network of other patches) and functional (mudflat matrix that impedes dispersal vs. brome-grass matrix that facilitates dispersal) connectivity. Planthoppers and parasitoids on caged patches exhibited density-dependent growth rates, achieved high equilibrium densities, and rarely went extinct. Therefore, experimental cordgrass patches were classified as population sources. Because access to immigrants did not result in elevated population densities, source populations were not also pseudosinks, i.e., patches whose densities occur above carrying capacity due to high immigration. Planthoppers and parasitoids in open patches in mudflat had dynamics similar to those in caged patches, but went extinct in 4-5 generations in open patches in brome. Brome-embedded patches leaked emigrants at a rate that exceeded the gains from reproduction and immigration; populations of this sort are known as population sieves. For species whose suitable patches are becoming smaller and more isolated as a result of increased habitat fragmentation, emigration losses are likely to become paramount, a condition favoring the formation of population sieves. An increase in the proportion of patches that are sieves is predicted to destabilize regional population dynamics.     

Physicochemical properties and mineral contents of seven different date fruit (Phoenix dactylifera L.) varieties growing from Saudi Arabia

The date (Phoenix dactylifera L.) fruits (Soukari, Soulag, Barhi, Khulas, Rozaiz, Soughi and Monaif) were evaluated with respect to some physical and chemical properties. While crude protein contents of fruits change between 1.51 % (Soulag) to 2.41 % (Soughi), crude fibre contents ranged between 1.91 % (Soukari) to 3.90 % (Barhi). Vitamin C contents of date samples changed between 971.82 mg/kg (Soughi) to 1,453.15 mg/kg (Barhi). Antioxidant activity of date fruits ranged from 80.07 IC₅₀ (Soukari) to 81.21 IC₅₀ (Soulag). The highest phenolic content was found in Khulas with a mean value of 198 mg GAE/100 g. Energy values of date fruits ranged from 3,725 kcal/kg (Soulag) to 3,870 kcal/kg (Soukari). Sucrose contents of date fruits changed between 1.02 % (Soulag) to 55.71 % (Soukari). Mineral contents of several date fruits were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). Date samples contain potassium at a range between 7,468 mg/kg (Khulas) to 9,619 mg/kg (Soulag). Phosphorus contents of fruits were found between 1,848 mg/kg (Soulag) to 3,066 mg/kg (Rozaiz) and followed by magnesium and calcium. The highest Zn (9.33 mg/kg), Cu (4.27 mg/kg) and Mn (3.26 mg/kg) were found in Rozaiz, Soukari and Barhi samples, respectively.     

Application of a computational model for Michael addition reactivity in the prediction of toxicity to Tetrahymena pyriformis

A computational model to predict acute aquatic toxicity to the ciliate Tetrahymena pyriformis has been developed. A general prediction of toxicity can be based on three consecutive steps: 1. Identification of a potential reactive mechanism via structural alerts; 2. Confirmation and quantification of (bio)chemical reactivity; 3. Establishing a relationship between calculated reactivity and toxicity. The method described herein uses a combination of a reactive toxicity (RT) model, including computed kinetic rate constants for adduct formation (log k) via a Michael acceptor mechanism of action, and baseline toxicity (BT), modelled by hydrophobicity (octanol-water partition coefficient). The maximum of the RT and BT values defines acute toxicity for a particular compound. The reactive toxicity model is based on site-specific steric and quantum chemical ground state electronic properties. The performance of the model was examined in terms of predicting the toxicity of 106 potential Michael acceptor compounds covering several classes of compounds (aldehydes, ketones, esters, heterocycles). The advantages of the computational method are described. The method allows for a closer and more transparent mechanistic insight into the molecular initiating events of toxicological endpoints.     

Validation of a standardized portable fluorescence method for determining trace beryllium in workplace air and wipe samples

Beryllium is widely used in industry for its unique properties; however, occupational exposure to beryllium particles can cause potentially fatal disease. Consequently, exposure limits for beryllium particles in air and action levels on surfaces have been established to reduce exposure risks for workers. Field-portable monitoring methods for beryllium are desired in order to facilitate on-site measurement of beryllium in the workplace, so that immediate action can be taken to protect human health. In this work, a standardized, portable fluorescence method for the determination of trace beryllium in workplace samples, i.e., air filters and dust wipes, was validated through intra- and inter-laboratory testing. The procedure entails extraction of beryllium in 1% ammonium bifluoride (NH(4)HF(2), aqueous), followed by fluorescence measurement of the complex formed between beryllium ion and hydroxybenzoquinoline sulfonate (HBQS). The method detection limit was estimated to be less than 0.02 microg Be per air filter or wipe sample, with a dynamic range up to greater than 10 microg. The overall method accuracy was shown to satisfy the accuracy criterion (A< or = +/-25%) for analytical methods promulgated by the US National Institute for Occupational Safety and Health (NIOSH). Interferences from numerous metals tested (in >400-fold excess concentration compared to that of beryllium) were negligible or minimal. The procedure was shown to be effective for the dissolution and quantitative detection of beryllium extracted from refractory beryllium oxide particles. An American Society for Testing and Materials (ASTM) International voluntary consensus standard based on the methodology has recently been published.