PCDD/F inhibition by prior addition of urea to the solid fuel in laboratory experiments and results statistical evaluation

The objectives of this work were to study the effect of urea addition to the fuel before the combustion on the suppression of PCDD/F emissions, to examine the influence of urea to PCDD/F isomer patterns by employing statistical analysis techniques and to determine the most effective method of urea addition. Urea in the form of powder and as an aqueous solution was mixed with RDF and the fuel mixtures were incinerated in a lab-scale reactor at 1000 degrees C. PCDD/F emitted during combustion experiments were collected in a quartz wool filter downstream the reactor unit. Analysis and quantification of PCDD/F showed that urea significantly affected PCDD/F emissions. Combustion of RDF containing 10% w/w urea resulted in PCDD/F emissions lower than 8 I-TEQ ng/g RDF, while the corresponding average value from single RDF combustion was 17 I-TEQ ng/g RDF. The PCDD/F prevention capacity of urea was independent from the method of urea addition to the fuel, as similar results were obtained after the addition of urea in the solid and in the aqueous phases. Results assessment by statistical methods showed that isomer patterns remained almost stable and were not affected by the method of urea addition.     

Laboratory studies on formation and minimisation of polychlorinated dibenzodioxins and -furans (PCDD/F) in secondary aluminium process

The objectives of this work were to study the formation mechanisms of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) in thermal aluminium recycling processes by use of laboratory experiments. The pattern of isomers of PCDD/F indicates that de novo synthesis is important in aluminium smeltery. The mechanisms of PCDD/F formation in aluminium smelting are similar to that of various incineration processes of waste material. The results of bioanalysis (EROD-test) confirms the existence of de novo synthesis of PCDD/F, but points out to the existence to some additional, toxic compounds of unknown structure. To reduce the amount of PCDD/F the input of carbon at the metal should be reduced; in addition the metal smeltery plants should be cleaned from fly ash particles. It is suggested to use good primary methods in the technical plants like constant feeding of the metal into the oven will minimise PCDD/F concentration. The biological EROD-bioassay is a good tool to estimate PCDD/F-TEQ values also for this technical process simulated in the laboratory.     

Enzymatic synthesis of bromo- and chlorocarbazoles and elucidation of their structures by molecular modeling

3-Chlorocarbazole, 3,6-dichlorocarbazole, dibromocarbazole, and 1,3,6,8-tetrabromocarbazole are emerging environmental contaminants which have been detected recently in water, sediment, and soil samples. However, their sources and occurrence have not been explained. Here, we report an enzymatic synthesis of bromo- and chlorocarbazoles by chloroperoxidase from Caldariomyces fumago in water. Density functional theory (DFT) method was used to predict the most stable products. Carbazole and chloroperoxidase were assayed in vitro in the presence of hydrogen peroxide, bromide, and chloride ions in different substrate ratio treatments against constant and varying enzyme concentrations. Halogenated carbazoles formed were identified by high-resolution gas chromatography coupled to mass spectrometry. In all treatments, bromination and chlorination took place, but the composition and concentration of compounds formed varied from one treatment to another. Mono-, di-, tri-, and tetra-substituted bromo- and chlorocarbazoles which include the reported environmental contaminants were synthesized. 3-Substituted and 3,6-substituted congeners were relatively higher in concentration. Enzyme concentration did not favor preferential formation of any of the compounds synthesized. However, their synthesis was influenced by halide concentration. Congeners with bromine and chlorine at position of C-3, C-3,6, C-1,3,6, and C-1,3,6,8 were calculated as the stable intermediate sigma complexes by DFT method. Regioselectivity in halogenation is discussed and hypothesis of the likely stable products in the environment explained. This study provides evidence that bromo- and chlorocarbazoles reported previously can be formed enzymatically in the environment, demonstrating the need to consider aromatic pollutants transformation and their potential toxicity enhancements in the management of water pollution and contaminated sites.     

Inside-sediment partitioning of PAH, PCB and organochlorine compounds and inferences on sampling and normalization methods

Comparability of sediment analyses for semivolatile organic substances is still low. Neither screening of the sediments nor organic-carbon based normalization is sufficient to obtain comparable results. We are showing the interdependency of grain-size effects with inside-sediment organic-matter distribution for PAH, PCB and organochlorine compounds. Surface sediment samples collected by Van-Veen grab were sieved and analyzed for 16 PAH, 6 PCB and 18 organochlorine pesticides (OCP) as well as organic-matter content. Since bulk concentrations are influenced by grain-size effects themselves, we used a novel normalization method based on the sum of concentrations in the separate grain-size fractions of the sediments. By calculating relative normalized concentrations, it was possible to clearly show underlying mechanisms throughout a heterogeneous set of samples. Furthermore, we were able to show that, for comparability, screening at <125 μm is best suited and can be further improved by additional organic-carbon normalization.     

Modelling changes in nitrogen emissions into the Oder River System 1875–1944

Studies of nutrient emissions into surface waters are usually only performed for years in recent decades. However, estimating nutrient emissions for the more distant past enables us to identify the main factors responsible for the increasing nutrient contamination since the end of the nineteenth century. We focussed on the Oder River System for 1875–1944, divided into 10-year periods. Nutrient emissions into surface waters were calculated with the model MONERIS (MOdelling Nutrient Emissions in RIver Systems). For seven different pathways and eight sources, the total nitrogen (TN) emissions were quantified. The TN-emissions into the surface waters for 1880 amounted to 25,300 t?year^?1, and by 1940, this value had almost doubled to 46,600?t?year^?1. In 1880, 57% of TN-emissions into the surface waters derived from urban systems, due to the high amount of untreated waste water. In 1940, only 34% of TN-emissions into surface waters derived from urban systems, despite a population growth of about 27% since 1880; point sources via newly constructed waste water treatment plants (WWTPs) increased from 4% (1880) to 26% (1940). During the study period, the main changes in diffuse TN-emissions from agriculture were caused by inorganic fertilizer application and nitrogen deposition, while TN-emissions via urban sources were shifted to point sources due to population growth and the construction of new WWTPs. Furthermore, estimated TN-concentrations could make a contribution to construct benchmarks for nutrient concentrations according to the physiochemical properties to implement the European Water Framework Directive (WFD 2000).