High-level aminoglycoside resistance and virulence characteristics among Enterococci isolated from recreational beaches in Malaysia

We report the first study on the occurrence of high-level aminoglycoside-resistant (HLAR) Enterococci in coastal bathing waters and beach sand in Malaysia. None of the encountered isolates were resistant to high levels of gentamicin (500 μg/mL). However, high-level resistance to kanamycin (2,000 μg/mL) was observed in 14.2 % of tested isolates, the highest proportions observed being among beach sand isolates. High-level resistance to kanamycin was higher among Enterococcus faecalis and Enterococcus faecium than Enterococcus spp. Chi-square analysis showed no significant association between responses to tested antibiotics and the species allocation or source of isolation of all tested Enterococci. The species classification of encountered Enterococci resistance to vancomycin was highest among Enterococcus spp. (5.89 %) followed by E. faecium (4.785) and least among E. faecalis. A total of 160 isolates were also tested for virulence characteristics. On the whole, caseinase production was profoundly highest (15.01 %) while the least prevalent virulence characteristic observed among tested beach Enterococci was haemolysis of rabbit blood (3.65 %). A strong association was observed between the source of isolation and responses for each of caseinase (C?=?0.47, V?=?0.53) and slime (C?=?0.50, V?=?0.58) assays. Analysis of obtained spearman’s coefficient showed a strong correlation between caseinase and each of the slime production (p?=?0.04), gelatinase (p?=?0.0035) and haemolytic activity on horse blood (p?=?0.004), respectively. Suggestively, these are the main virulent characteristics of the studied beach Enterococci. Our findings suggest that recreational beaches may contribute to the dissemination of Enterococci with HLAR and virulence characteristics.     

Photooxidative removal of the herbicide Acid Blue 9 in the presence of hydrogen peroxide: modeling of the reaction for evaluation of electrical energy per order (EEO)

The present work deals with photooxidative removal of the herbicide, Acid Blue 9 (AB9), in water in the presence of hydrogen peroxide (H₂O₂) under UV light illumination (30 W). The influence of the basic operational parameters such as amount of H₂O₂, irradiation time and initial concentration of AB9 on the photodegradation efficiency of the herbicide was investigated. The degradation rate of AB9 was not appreciably high when the photolysis was carried out in the absence of H₂O₂ and it was negligible in the absence of UV light. The photooxidative removal of the herbicide was found to follow pseudo-first-order kinetic, and hence the figure-of-merit electrical energy per order (E_Eo) was considered appropriate for estimating the electrical energy efficiency. A mathematical relation between the apparent reaction rate constant and H₂O₂ used was applied for prediction of the electricity consumption in the photooxidative removal of AB9. The results indicated that this kinetic model, based on the initial rates of degradation, provided good prediction of the E_Eo values for a variety of conditions. The results also indicated that the UV/H₂O₂ process was appropriate as the effective treatment method for removal of AB9 from the contaminated wastewater.     

Evaluation of pollution load of Lahore Canal by quantification of various pollutants through physicochemical characterisation

The work describes the physicochemical analysis of the water samples collected from Lahore Canal to evaluate pollution load at different points of the canal. Different physical and chemical pollutants such as temperature, pH, electrical conductivity, total dissolved and suspended solids, turbidity, chlorides, sulphates, nitrates, oils and grease, dissolved oxygen, chemical oxygen demand and biological oxygen demand (BOD) were analysed. The data was analysed through analysis of variance, which showed that the p values for dissolved oxygen (DO), chemical oxygen demand (COD), BOD, electrical conductivity, total dissolved solid (TDS), total suspended solid (TSS), turbidity, oil and grease, sulphates, and nitrates are <0.05, while p value of temperature, pH, and chlorides are 1.000, 0.984, and 0.070, respectively, which are >0.05. Further regression analysis revealed that the simple line regression modal is fit for turbidity and TSS, electrical conductivity and TDS, COD and DO, BOD and DO, and BOD and COD. The studies reveal that Lahore Canal is receiving a considerable amount of physical and chemical pollutants at different points.     

An Experimental Study on Productivity and Quality Improvement of Horizontal Continuous Casting Process

The aim of the current work is to provide information on how to improve the productivity and quality in the Horizontal Continuous Casting process (HCC). After a first numerical 2D/3D survey about the solidification in the HCC, an experimental investigation has been carried out to validate numerical results. Some casting parameters have been measured and collected: inlet and outlet temperatures, flow rate, heat flux and casting temperature. The study results lead to a correlation between these casting parameters and the casting quality. To obtain the best quality for each alloy, a set of operating parameters has been proposed. There is a very good agreement between the current results and earlier numerical results. Also based on the results, one can gain an insight on the productions of each casting machine and the grades of its quality.     

Extraction of Lignosulfonate from Black Liquor into Construction of a Magnetic Lignosulfonate-Based Adsorbent and Its Adsorption Properties for Dyes from Aqueous Solutions

Journal of Polymers and the Environment - Lignosulfonate, one of the lignin derivatives, was extracted from the black liquor as a byproduct of the wood and paper industry. It was used to prepare...     

Assessment of food-energy-environmental pollution nexus in Iran: the nonlinear approach

Environmental Science and Pollution Research - Iran’s agricultural production has expanded significantly in recent years. Environmental pollution caused by the use of energy and chemical...     

Detection of SARS-CoV-2 in the indoor air of intensive care unit (ICU) for severe COVID-19 patients and its surroundings: considering the role of environmental conditions

Environmental Science and Pollution Research - There is ambiguity about the airborne transmission of the SARS-CoV-2. While a distance of 6 feet is considered a safe physical distance, new findings...     

Photooxidative removal of the herbicide Acid Blue 9 in the presence of hydrogen peroxide: modeling of the reaction for evaluation of electrical energy per order (E EO)

The present work deals with photooxidative removal of the herbicide, Acid Blue 9 (AB9), in water in the presence of hydrogen peroxide (H2O2) under UV light illumination (30 W). The influence of the basic operational parameters such as amount of H2O2, irradiation time and initial concentration of AB9 on the photodegradation efficiency of the herbicide was investigated. The degradation rate of AB9 was not appreciably high when the photolysis was carried out in the absence of H2O2 and it was negligible in the absence of UV light. The photooxidative removal of the herbicide was found to follow pseudo-first-order kinetic, and hence the figure-of-merit electrical energy per order (E Eo) was considered appropriate for estimating the electrical energy efficiency. A mathematical relation between the apparent reaction rate constant and H2O2 used was applied for prediction of the electricity consumption in the photooxidative removal of AB9. The results indicated that this kinetic model, based on the initial rates of degradation, provided good prediction of the E Eo values for a variety of conditions. The results also indicated that the UV/H2O2 process was appropriate as the effective treatment method for removal of AB9 from the contaminated wastewater.     

Estimation of bacteriological levels in surface water samples to evaluate their contamination profile

The present work deals with the assessment of bacteriological contamination along with some physico-chemical parameters of water samples from Lahore canal. ANOVA showed that the observed p values of log-transformed viable plate counts, total suspended solids, turbidity, and biological oxygen demand are 0.000, 0.000, 0.000, and 0.000, respectively, which are <0.05, while the p value of total coliforms, total fecal coliforms, and Escherichia coli are 0.728, 0.827, and 0.081, respectively which are >0.05. Significant correlation was observed between log-transformed viable plate counts (CFU), biological oxygen demand, total suspended solids, and turbidity. Further regression analysis revealed that simple line regression model is fit for log-transformed viable plate counts and total suspended solids, log-transformed viable plate counts and turbidity, turbidity and total suspended solids, biological oxygen demand and total suspended solids, biological oxygen demand and log-transformed viable plate counts, and biological oxygen demand and turbidity.     

Characterization of slow pyrolysis biochars: effects of feedstocks and pyrolysis temperature on biochar properties

Biochars are increasingly used as soil amendment and for C sequestration in soils. The influence of feedstock differences and pyrolysis temperature on biochar characteristics has been widely studied. However, there is a lack of knowledge about the formation of potentially toxic compounds that remain in the biochars after pyrolysis. We investigated biochars from three feedstocks (wheat straw, poplar wood, and spruce wood) that were slowly pyrolyzed at 400, 460, and 525°C for 5 h (straw) and 10 h (woodchips), respectively. We characterized the biochars' pH, electrical conductivity, elemental composition (by dry combustion and X-ray fluorescence), surface area (by N adsorption), water-extractable major elements, and cation exchange capacity (CEC). We further conducted differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffractometry to obtain information on the biochars' molecular characteristics and mineralogical composition. We investigated trace metal content, total polycyclic aromatic hydrocarbon (PAH) content, and PAH composition in the biochars. The highest salt (4.92 mS cm) and ash (12.7%) contents were found in straw-derived biochars. The H/C ratios of biochars with highest treatment temperature (HTT) 525°C were 0.46 to 0.40. Surface areas were low but increased (1.8-56 m g) with increasing HTT, whereas CEC decreased (162-52 mmol kg) with increasing HTT. The results of DSC and FTIR suggested a loss of labile, aliphatic compounds during pyrolysis and the formation of more recalcitrant, aromatic constituents. X-ray diffractometry patterns indicated a mineralogical restructuring of biochars with increasing HTT. Water-extractable major and trace elements varied considerably with feedstock composition, with trace elements also affected by HTT. Total PAH contents (sum of EPA 16 PAHs) were highly variable with values up to 33.7 mg kg; irrespective of feedstock type, the composition of PAHs showed increasing dominance of naphthalene with increasing HTT. The results demonstrate that biochars are highly heterogeneous materials that, depending on feedstock and HTT, may be suitable for soil application by contributing to the nutrient status and adding recalcitrant C to the soil but also potentially pose ecotoxicological challenges.